1、Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16BS EN 2040:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2040 August 2017 ICS 49.025.10 English Version Aerospace series - Rectan
2、gular steel bars rolled - Dimensions - Tolerance js 16 Srie arospatiale - Barres plates lamines en acier - Dimensions - Tolrance js 16 Luft- und Raumfahrt - Rechteckige Stangen aus Stahl gewalzt - Abmessungen - Toleranz js 16 This European Standard was approved by CEN on 14 May 2017. CEN members are
3、 bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to t
4、he CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Cen
5、tre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan
6、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix
7、17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2040:2017 ENational forewordThis British Standard is the UK implementation of EN 2040:2017.The UK participation in its preparation was entrusted to Technical
8、Committee ACE/61, Metallic materials for aerospace purposes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Th
9、e British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 97028 3ICS 49.025.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31
10、 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 2040:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 2040 August 2017 ICS 49.025.10 English Version Aerospace series - Rectangular steel bars rolled - Dimensions - Tolerance js 16 Srie arospat
11、iale - Barres plates lamines en acier - Dimensions - Tolrance js 16 Luft- und Raumfahrt - Rechteckige Stangen aus Stahl gewalzt - Abmessungen - Toleranz js 16 This European Standard was approved by CEN on 14 May 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which st
12、ipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Europea
13、n Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are t
14、he national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Roman
15、ia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form
16、 and by any means reserved worldwide for CEN national Members. Ref. No. EN 2040:2017 EBS EN 2040:2017EN 2040:2017 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Materials 4 4 Required characteristics 4 5 Designation . 9 6 Marking . 9 Bibliography 10 BS EN 2040:2017EN 20
17、40:2017 (E) 3 European foreword This document (EN 2040:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval o
18、f the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicti
19、ng national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC
20、 Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela
21、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 2040:2017EN 2040:2017 (E) 4 1 Scope This European Standard specifies the dimensions, tolerances and p
22、hysical constants of rolled rectangular steel bars, used in aerospace construction. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For un
23、dated references, the latest edition of the referenced document (including any amendments) applies. EN 2030, Aerospace series Steel X105CrMo17 (1.3544) Hardened and tempered Bars De 150 mm 3 Materials The materials are defined in the material standards and technical specification. 4 Required charact
24、eristics The dimensions, tolerances and linear mass are defined in Figure 1 and Table 1. Figure 1 BS EN 2040:2017EN 2040:2017 (E) 5 Table1(1of2)Dimensionsand tolerancesinmillimetresWidthThicknessH34567810121518202530323540455060BTolerance(js16)Tolerance(js16)0,3750,450,550,650,800,95Linearmassa (kg/
25、m)100,550,2350,3140,3930,4710,550120,2830,3770,4710,5650,6590,754140,3300,4400,5500,6590,7690,879160,3770,5020,6280,7540,8791,001,26180,4240,5650,7070,8480,9891,131,41200,650,4710,6280,7850,9421,101,261,571,882,362,83220,5180,6910,8641,041,211,381,732,072,593,11250,5890,7850,9811,181,371,571,962,362
26、,943,53280,6590,8791,101,321,541,762,202,643,303,96300,7070,9421,181,411,651,882,362,833,534,244,71320,800,7541,001,261,511,762,012,513,013,774,525,02350,8241,101,371,651,922,202,753,304,124,955,506,878,248,79400,9421,261,571,802,202,513,143,774,715,656,287,859,4210,0451,411,772,122,472,833,534,245,
27、306,367,078,8310,611,3501,571,962,362,753,143,934,715,897,067,859,8111,812,6550,951,732,162,593,023,454,325,186,487,778,6410,813,013,8601,882,362,833,303,774,715,657,078,489,4211,814,115,116,518,821,2652,042,553,063,574,085,106,127,659,1810,212,815,316,317,920,423,0702,202,753,303,854,405,506,598,24
28、9,8911,013,716,517,619,222,024,727,5752,362,943,534,124,715,897,078,8310,611,814,717,718,820,623,626,529,4802,513,143,774,405,026,287,549,4211,312,615,718,820,122,025,128,331,4BS EN 2040:2017EN 2040:2017 (E) 6 Table1(2of2)DimensionsandtolerancesinmillimetresWidthThicknessH345678101215182025303235404
29、55060BTolerance(js16)Tolerance(js16)0,3750,450,550,650,800,95Linearmassa (kg/m)901,103,534,244,955,657,078,4810,612,714,117,721,222,624,728,331,835,342,41003,934,715,506,237,859,4211,814,115,719,623,625,127,531,435,339,247,11105,106,046,918,6410,413,015,517,321,625,927,630,234,538,943,251,81205,656,
30、597,549,4211,314,117,018,823,628,330,133,037,742,447,156,51301,256,127,148,1610,212,215,318,420,425,530,632,735,740,845,951,061,21407,698,7911,013,216,519,822,027,533,035,238,544,049,555,065,91508,249,4211,814,117,721,223,629,435,337,741,247,153,058,970,61608,7910,012,615,118,822,625,131,437,740,244
31、,050,256,51809,8911,314,117,021,225,428,335,342,445,249,556,563,62001,4515,718,823,628,331,439,247,150,255,062,870,625019,623,629,435,339,249,158,962,868,778,588,33001,6028,335,342,447,158,970,675,482,494,21064001,8047,156,562,878,594,2100110126141aCalculatedonthebasisof7,85kg/m3.BS EN 2040:2017EN 2
32、040:2017 (E) 6 Table1(2of2)DimensionsandtolerancesinmillimetresWidthThicknessH34567810121518202530323540455060BTolerance(js16)Tolerance(js16)0,3750,450,550,650,800,95Linearmassa (kg/m)901,103,534,244,955,657,078,4810,612,714,117,721,222,624,728,331,835,342,41003,934,715,506,237,859,4211,814,115,719,
33、623,625,127,531,435,339,247,11105,106,046,918,6410,413,015,517,321,625,927,630,234,538,943,251,81205,656,597,549,4211,314,117,018,823,628,330,133,037,742,447,156,51301,256,127,148,1610,212,215,318,420,425,530,632,735,740,845,951,061,21407,698,7911,013,216,519,822,027,533,035,238,544,049,555,065,9150
34、8,249,4211,814,117,721,223,629,435,337,741,247,153,058,970,61608,7910,012,615,118,822,625,131,437,740,244,050,256,51809,8911,314,117,021,225,428,335,342,445,249,556,563,62001,4515,718,823,628,331,439,247,150,255,062,870,625019,623,629,435,339,249,158,962,868,778,588,33001,6028,335,342,447,158,970,67
35、5,482,494,21064001,8047,156,562,878,594,2100110126141aCalculatedonthebasisof7,85kg/m3.EN 2040:2017 (E) 7 Table2(1of2)Dimensionsand tolerancesinmillimetresWidthBThicknessH34567810121518202530323540455060Dimensionalcode10AAABACADAE12AFAGAHAJAKAL14AMANAPAQARAS16ATAUAVAWAYAZBA18BBBCBDBEBFBGBH20BJBKBLBMB
36、NBPBQBRBSBT22BUBVBWBYBZCACBCCCDCE25CFCGCHCJCKCLCMCNCPCQ28CRCSCTCUCVCWCYCZDADB30DCDDDEDFDGDHDJDKDLDMDN32DPDQDRDSDTDUDVDWDYDZEA35EBECEDEEEFEGEHEJEKELEMENEPEQ40ERESETEUEVEWEYEZFAFBFCFDFEFF45FGFHFJFKFLFMFNFPFQFRFSFTFU50FVFWFYFZGAGBGCGDGEGFGGGHGJ55GKGLGMGNGPGQGRGSGTGUGVGWGY60GZHAHBHCHDHEHFHGHHHJHKHLHMHNH
37、PHQ65HRHSHTHUHVHWHYHZJAJBJCJDJEJFJGJH70JJJKJLJMJNJPJQJRJSJTJUJVJWJYJZKAKB75KCKDKEKFKGKHKJKKKLKMKNKPKQKRKSKTKU80KVKWKYKZLALBLCLDLELFLGLHLJLKLLLMLNBS EN 2040:2017EN 2040:2017 (E) 8 Table2 (2of2)Dimensionsand tolerancesinmillimetresWidthBThicknessH34567810121518202530323540455060Dimensionalcode90LPLQLR
38、LSLTLULVLWLYLZMAMBMCMDMEMFMG100MHMJMKMLMMMNMPMQMRMSMTMUMVMWMYMZNA110NBNCNDNENFNGNHNJNKNLNMNNNPNQNRNS120NTNUNVNWNYNZPAPBPCPDPEPFPGPHPJPK130PLPMPNPPPQPRPSPTPUPVPWPYPZQAQBQC140QDQEQFQGQHQJQKQLQMQNQPQQQRQSQT150QUQVQWQYQZRARBRCRDRERFRGRHRJRK160RLRMRNRPRQRRRSRTRURVRWRYRZ180SASBSCSDSESFSGSHSJSKSLSMSN200SPS
39、QSRSSSTSUSVSWSYSZTA250TBTCTDTETFTGTHTJTKTLTM300TNTPTQTRTSTTTUTVTWTY400TZUAUBUCUDUEUFUGUHBS EN 2040:2017EN 2040:2017 (E) 8 Table2 (2of2)Dimensionsand tolerancesinmillimetresWidthBThicknessH34567810121518202530323540455060Dimensionalcode90LPLQLRLSLTLULVLWLYLZMAMBMCMDMEMFMG100MHMJMKMLMMMNMPMQMRMSMTMUMV
40、MWMYMZNA110NBNCNDNENFNGNHNJNKNLNMNNNPNQNRNS120NTNUNVNWNYNZPAPBPCPDPEPFPGPHPJPK130PLPMPNPPPQPRPSPTPUPVPWPYPZQAQBQC140QDQEQFQGQHQJQKQLQMQNQPQQQRQSQT150QUQVQWQYQZRARBRCRDRERFRGRHRJRK160RLRMRNRPRQRRRSRTRURVRWRYRZ180SASBSCSDSESFSGSHSJSKSLSMSN200SPSQSRSSSTSUSVSWSYSZTA250TBTCTDTETFTGTHTJTKTLTM300TNTPTQTRTS
41、TTTUTVTWTY400TZUAUBUCUDUEUFUGUHEN 2040:2017 (E) 9 5 Designation The designation of products defined in this standard may include the following elements: a) name; b) number of material standard; c) dimensions; d) number of this dimensional standard. EXAMPLE BAR EN2030 40 x 10 EN2040 NOTE When the des
42、ignation is to be codified, dimensions shall be replaced by the code letters in Table 2 of this standard. 6 Marking Marking of the semi-finished products defined in this standard shall comply with the requirements of the technical specification. BS EN 2040:2017EN 2040:2017 (E) 10 Bibliography 1 EN 4
43、700 (all parts), Aerospace series Steel and heat resisting alloy Wrought products Technical specification 2 ISO 286 (all parts), Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes BS EN 2040:2017This page deliberately left blankBSI is the national body responsibl
44、e for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business
45、, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of al
46、l sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowle
47、dge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and co
