EN 2591-417-2001 en Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 417 Tensile Strength (Crimped Connection)《航空航天系列 光电连接元件的试验方法 第417部分 抗拉强度(.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 3712-4-1991 Building and construction sealants - Method of test for adhesion in peel《建筑和结构密封剂 第4部分 附着强度剥离试验方法》.pdf

BS 3728-1982 Specification for size designation of childrens and infants wear《儿童和婴儿服装尺寸标明规范》.pdf

BS 373-1957 Methods of testing small clear specimens of timber《无节疤小木材样品的试验方法》.pdf

BS 3730-1-1987 Assessment of departures from roundness - Glossary of roundness measurement terms《不圆度评定 第1部分 不圆度测量术语》.pdf

BS 3730-2-1982 Assessment of departures from roundness - Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and c.pdf

BS 3730-3-1982 Assessment of departures from roundness - Methods for determining departures from roundness using two- and three-point measurement《不圆度评定 第3部分 测定不圆度的二点三点测量法》.pdf

BS 3731-1987 Specification for vee blocks《V 形块规范》.pdf

BS 3733-1974 Specification for endless V-belt drives for agricultural purposes《农用环型三角皮带传动规范》.pdf

BS 3735-1987 Specification for plastics and rubber dustbin lids《塑料和橡胶吸尘箱盖规范》.pdf