1、BSI Standards PublicationBS EN 4165-015:2015Aerospace series Connectors, electrical,rectangular, modular Operating temperature 175 CcontinuousPart 015: Round chimney for accessory (1per module cavity), 2 and 4 modules Product standardBS EN 4165-015:2015 BRITISH STANDARDNational forewordThis British
2、Standard is the UK implementation of EN 4165-015:2015. It supersedes BS EN 4165-015:2005 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committe
3、e can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89127 4 ICS 49.060 Co
4、mpliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2015.Amendments/corrigenda issued since publicationDate Text affectedBS EN 4165-015:2015EUROPEAN STAND
5、ARD NORME EUROPENNE EUROPISCHE NORMEN 4165-015 September 2015 ICS 49.060 Supersedes EN 4165-015:2005English Version Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 C continuous - Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules
6、- Product standard Srie arospatiale - Connecteurs lectriques rectangulaires modulaires - Temprature dutilisation 175 C continu - Partie 015 : Chemines cylindriques pour accessoires (1 par cavit de module), 2 et 4 modules - Norme de produit Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in
7、 modularer Bauweise - Betriebstemperatur 175 C konstant - Teil 015: Hlse, rund, fr Endgehuse (eine pro Modulkammer), 2 und 4 Module - Produktnorm This European Standard was approved by CEN on 5 March 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
8、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard e
9、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national
10、standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia
11、, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means res
12、erved worldwide for CEN national Members. Ref. No. EN 4165-015:2015 EBS EN 4165-015:2015EN 4165-015:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Round chimney for accessories . 5 6 Round chimney for acces
13、sory class 7 7 Designation 7 8 Marking . 7 9 Technical specification 7 BS EN 4165-015:2015EN 4165-015:2015 (E) 3 European foreword This document (EN 4165-015:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes
14、carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national stand
15、ard, either by publication of an identical text or by endorsement, at the latest by March 2016, and conflicting national standards shall be withdrawn at the latest by March 2016. This document supersedes EN 4165-015:2005. Attention is drawn to the possibility that some of the elements of this docume
16、nt may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Au
17、stria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe
18、den, Switzerland, Turkey and the United Kingdom. BS EN 4165-015:2015EN 4165-015:2015 (E) 4 1 Scope This European Standard defines the round chimney for accessories (1 per module cavity) used in the family of rectangular electrical connectors, 2 and 4 modules. The connector accessory body correspondi
19、ng to those round chimneys is defined in EN 4165-014. 2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest ed
20、ition of the referenced document (including any amendments) applies. EN 4165-001, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 001: Technical specification EN 4165-002, Aerospace series Connectors, electrical, rectangular, modular Operatin
21、g temperature 175 C continuous Part 002: Specification of performance and contact arrangements EN 4165-014, Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 C continuous Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and series 3 Pr
22、oduct standard 3 Terms and definitionsFor the purposes of this document, the terms and definitions given in EN 4165-001 apply. 4 Required characteristics See Figure 1 and Figure 2. BS EN 4165-015:2015EN 4165-015:2015 (E) 5 5 Round chimney for accessories Mass: 1,50 g max. Dimensions in millimetres A
23、 = 10,5 mm 0,05 mm. (groove for clip) Key 1 Hexagonal conductive clip, thread 0,6 2 Inside section 69,4 mm2minimum Figure 1 Removable round chimney BS EN 4165-015:2015EN 4165-015:2015 (E) 6 Mass: 1,70 g max. Dimensions in millimetres A = 10,5 mm 0,05 mm. (groove for clip) Key 1 Hexagonal conductive
24、clip, thread 0,6 2 R 0,5 or chamfer NOTE 1 Envelop schematic representation. NOTE 2 Chimney shall be compatible with all shielded accessory body material classes and shell size types. Figure 2 Removable round chimney with cable tie support BS EN 4165-015:2015EN 4165-015:2015 (E) 7 6 Round chimney fo
25、r accessory class See Table 1. Table 1 Material class and temperature ranges Class Description B Round chimney for accessory with housing (shell) nickel plated, aluminium alloy, 48 h resistance to salt spray, maximum operating temperature: 175 C continuous. F Round chimney for accessory with housing
26、 (shell) black nickel plated, aluminium alloy, 96 h resistance to salt mist, maximum operating temperature 175 C continuous W Round chimney for accessory with housing (shell) olive drab cadmium plated, aluminium alloy, 500 h resistance to salt mist, maximum operating temperature 175 C continuous 7 D
27、esignation EXAMPLE Description block ELECTRICAL CONNECTOR ROUND CHIMNEY Identity block EN4165F15A Number of the basic standard Class type (see Table 1) Type 15: Round chimney (see EN 4165-002) Cable tie option Nothing = without cable tie device. A = with cable tie device. 8 Marking Marking shall be
28、applied to the chimney. This marking shall include: The identity block as defined in suitable product standard; The date of manufacture (yearweek); The manufacturers name or trade mark. 9 Technical specification See EN 4165-001. This page deliberately left blankThis page deliberately left blankBSI i
29、s the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI
30、Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in
31、 a dependable format and ref_ined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about Brit
32、ish Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be
33、purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our su
34、bscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments a
35、nd receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre
36、revised or replaced. To f_ind out more about becoming a BSI Subscribing Member and the benef_its of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplie
37、d as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benef_it your business. If you
38、f_ind an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity th
39、at owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval
40、 system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW
