1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances SafetyPart 2-13: Particular requirements for deep fat fryers, frying pans and similar appliancesBS EN 60335-2-13:2010BS EN 60335-2-13:
2、2010+A11:2012BS EN 60335-2-13:2010+A11:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60335-2-13:2010+A11:2012. It is derived from IEC 60335-2-13:2009. It supersedes BS EN 60335-2-13:2010, which will be withdrawn on 9 July 2015.Where a common modification
3、has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by .The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical ap
4、pliances, to Subcommittee CPL/61/7, Safety of electrical appliances Heated appliance group.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsib
5、le for its correct application. The British Standards Institution 2012. Published by BSI Standards Limited 2012ISBN 978 0 580 78602 0ICS 97.040.20; 97.040.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the
6、 Standards Policy and Strategy Committee on 31 May 2010.Amendments/corrigenda issued since publicationDate Text affected31 October 2012 Implementation of CENELEC amendment A11:2012EUROPEAN STANDARD EN 60335-2-13 NORME EUROPENNE EUROPISCHE NORM February 2010 CENELEC European Committee for Electrotech
7、nical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 6
8、0335-2-13:2010 E ICS 13.120; 97.040.50 Supersedes EN 60335-2-13:2003 + A1:2004 + A2:2008English version Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances (IEC 60335-2-13:2009) Appareils lectrodomestiques
9、et analogues - Scurit - Partie 2-13: Rgles particulires pour les friteuses, les poles frire et appareils analogues (CEI 60335-2-13:2009) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-13: Besondere Anforderungen fr Frittiergerte, Bratpfannen und hnliche Gerte (IEC 6033
10、5-2-13:2009) This European Standard was approved by CENELEC on 2010-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib
11、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil
12、ity of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germ
13、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60335-2-13:2010EN 60335-2-13:2012+A11August 2012EN 60335-2-13:2010 - 2 - Foreword The
14、text of document 61/3873/FDIS, future edition 6 of IEC 60335-2-13, prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-13 on 2010-02-01. This European Standard supe
15、rsedes EN 60335-2-13:2003 + A1:2004 + A2:2008. The principal changes in EN 60335-2-13:2010 as compared with EN 60335-2-13:2003 are as follows (minor changes are not listed): the scope is changed to cover household and similar use, additional instructions are added to reflect the content of the scope
16、 (7.12). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemente
17、d at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 date on which national standards conflicting with the EN have to be withdrawn (dow) 2015-02-01 This Part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliance
18、s Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This Pa
19、rt 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for deep fat fryers, frying pans and similar appliances. When a particular subclause of Part 1 is not mentioned in this Part 2, that subclause applies as far as i
20、s reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless n
21、otes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z.
22、 NOTE 2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no s
23、pecial national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this document, p is used in the margin to indicate
24、 instructions for preparing the printed version. BS EN 60335-2-13:2010BS EN 60335-2-13:2010+A11:2012EN 60335-2-13:2010+A11:2012 2 - 3 - EN 60335-2-13:2010 Introduction p Add: An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered
25、by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential
26、 safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-13:2009 was approved by CENELEC as a European Standard without any modification. _
27、 Bibliography p Add the following notes to the standards mentioned: IEC 60335-2-37 NOTE Harmonized as EN 60335-2-37 IEC 60335-2-39 NOTE Harmonized as EN 60335-2-39 ISO 13732-1 NOTE Harmonized as EN ISO 13732-1 _ BS EN 60335-2-13:2010- 3 - EN 60335-2-13:2010 Introduction p Add: An investigation by CE
28、NELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly
29、of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International
30、Standard IEC 60335-2-13:2009 was approved by CENELEC as a European Standard without any modification. _ Bibliography p Add the following notes to the standards mentioned: IEC 60335-2-37 NOTE Harmonized as EN 60335-2-37 IEC 60335-2-39 NOTE Harmonized as EN 60335-2-39 ISO 13732-1 NOTE Harmonized as EN
31、 ISO 13732-1 _ BS EN 60335-2-13:2010EN 60335-2-13:2010/A11:2012 2 Foreword This document (EN 60335-2-13:2010/A11:2012) has been prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at na
32、tional level by publication of an identical national standard or by endorsement (dop) 2013-07-09 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-07-09 Attention is drawn to the possibility that some of the elements of this document may be th
33、e subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and EN 60335-2-13:2010. This standard covers the Principle Elements of the Safety Objectives
34、 for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). BS EN 60335-2-13:2010+A11:2012EN 60335-2-13:2010+A11:2012 3 Foreword to amendment A11 2 60335-2-13 IEC:2009(E) CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Definitions 7 4 General requiremen
35、t.8 5 General conditions for the tests 8 6 Classification8 7 Marking and instructions.8 8 Protection against access to live parts9 9 Starting of motor-operated appliances 9 10 Power input and current .9 11 Heating 9 12 Void10 13 Leakage current and electric strength at operating temperature10 14 Tra
36、nsient overvoltages .10 15 Moisture resistance 10 16 Leakage current and electric strength.11 17 Overload protection of transformers and associated circuits .11 18 Endurance11 19 Abnormal operation 11 20 Stability and mechanical hazards .12 21 Mechanical strength .12 22 Construction.12 23 Internal w
37、iring.12 24 Components .12 25 Supply connection and external flexible cords 13 26 Terminals for external conductors.13 27 Provision for earthing .13 28 Screws and connections.13 29 Clearances, creepage distances and solid insulation 13 30 Resistance to heat and fire.13 31 Resistance to rusting14 32
38、Radiation, toxicity and similar hazards14 Annexes .15 Bibliography16 BS EN 60335-2-13:2010BS EN 60335-2-13:2010+A11:2012EN 60335-2-13:2010+A11:2012 4 11111111111212121313131313131414141414141415165667777 6 60335-2-13 IEC:2009(E) INTRODUCTION It has been assumed in the drafting of this International
39、Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in norma
40、l use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This standard takes into account the requirements of IEC 60364
41、as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the r
42、elevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means th
43、at the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and tak
44、es precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For
45、 example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards. An appliance that complies with the text of this standard will not necessarily be considered to co
46、mply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this s
47、tandard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. BS EN 60335-2-13:2010BS EN 60335-2-13:2010+A11:2012EN 60335-2-13:2010+A11:2012 5 60335-2-13 IEC:2009(E) 7 HOUSEHOLD AND SIMILAR
48、ELECTRICAL APPLIANCES SAFETY Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric deep fat fryers having a recommended maximum quantity of o
49、il not exceeding 5 l, frying pans, woks and other appliances in which oil is used for cooking, and intended for household use and similar use, their rated voltage being not more than 250 V. Appliances intended for normal household and similar use and that may also be used by laymen in shops, in light industry and on farms are within the scope of this standard. However, if the appliance is intended to be used professionally to proce
