1、BRITISH STANDARDBS EN 60384-4-1:2007Fixed capacitors for use in electronic equipment Part 4-1: Blank detail specification Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZICS 31.060.50g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g4
2、4g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Incorporating April 2009rrigendumcoNational forewordThis British Standard is the UK implementation of EN 60384-4-1:2007, incorporating corrigendum April 2009. It supersedes BS QC
3、300301:1993 which is withdrawn. Together with BS EN 60384-4-2:2007 it supersedes BS EN 130301:2002 which is withdrawn. Together with BS EN 60384-4:2007 and BS EN 60384-4-2:2007 it supersedes BS QC 300300:1998 which is withdrawn.The UK participation in its preparation was entrusted to Technical Commi
4、ttee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application
5、.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60384-4-1:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2008 BSI 2010Amendments/corrigenda issued since publicationDate Comments ISBN 978 0
6、 580 67717 530 April 2010 Supersession text added in National and EN foreword31 March 2010 Supersession text amendedEUROPEAN STANDARD EN 60384-4-1 NORME EUROPENNE EUROPISCHE NORM May 2007 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique
7、Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-4-1:2007 E ICS 31.060.50 English version Fixed capacitors for u
8、se in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ (IEC 60384-4-1:2007) Condensateurs fixes utiliss dans les quipements lectroniques - Partie 4-1: Spcification particulire cadre - Condensateurs
9、fixes lectrolytiques en aluminium lectrolyte non solide - Niveau dassurance de la qualit EZ (CEI 60384-4-1:2007) Festkondensatoren zur Verwendung in Gerten der Elektronik - Teil 4-1: Vordruck fr Bauartspezifikation -Aluminium-Elektrolyt-Kondensatoren mit flssigem Elektrolyten - Bewertungsstufe EZ (I
10、EC 60384-4-1:2007) This European Standard was approved by CENELEC on 2007-04-01 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an
11、d bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon
12、sibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany,
13、 Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Incorporating Corrigendum April 2009Foreword The text of document 40/1762/CDV, future edition 3
14、of IEC 60384-4-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60384-4-1 on 2007-04-01. The following dates were fixed: latest date by which the EN has to be implement
15、ed at national level by publication of an identical national standard or by endorsement (dop) 2008-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-04-01 _ Endorsement notice The text of the International Standard IEC 60384-4-1:2007 was approv
16、ed by CENELEC as a European Standard without any modification. _ This European Standard, together with EN 60384-4-2:2007, supersedes EN 130301:2002. Annex ZA has been added by CENELEC. BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)CONTENTS 1 General data 6 1.1 Recommended method(s) of mounting (to be ins
17、erted)6 1.2 Dimensions .6 1.3 Ratings and characteristics .6 1.4 Normative references 7 1.5 Marking .7 1.6 Ordering information7 1.7 Certified records of released lots.7 1.8 Additional information (not for inspection purposes) 7 1.9 Additional or increased severities or requirements to those specifi
18、ed in the generic and/or sectional specification7 2 Inspection requirements .8 2.1 Procedures8 Table 1 Case size reference and dimensions .6 Table 2 Values of capacitance and of voltage related to case sizes .6 Table 3 Tangent of loss angle, impedance and rated ripple current7 Table 4 Other characte
19、ristics .7 Table 5 Test schedule for qualification conformance inspection .8 Annex ZA (normative) corresponding European publications 16 Normative references to international publications with theirBS EN 60384-4-1:2007EN 60384-4-1:2007 (E)FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 4-1: Bl
20、ank detail specification Fixed aluminium electrolytic capacitors with non-solid electrolyte Assessment level EZ Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of det
21、ail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications, the contents of 1.4 of the sectional specification shall be taken into acc
22、ount. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification 1 The International Electrotechnical Commission or the National Standards Organization under whose authority the
23、detail specification is drafted. 2 The IEC or National Standards number of the detail specification, data of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification. 4 The IEC number of the blank detail specificati
24、on. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed board applications, this is clearly stated in the detail specification in this position. 7 Outline d
25、rawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. 8 Application or group of applications covered and/or assessment leve
26、l. NOTE The assessment level(s) to be used in a detail specification are selected from 3.5.4 of the sectional specification. This implies that one blank detail specification may be used in combination with several assessment levels, provided the grouping of the tests does not change. 9 Reference dat
27、a on the most important properties, to allow comparison between the various capacitor types. BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)1 IEC 60384-4-1-XXX 2 QC 300301-XXX IEC 60384-4-1 4 QC 300301 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: IEC 60384-1 IEC 60384-4 3 Outline drawing:
28、 (see Table 1) ( angle projection) 7 FIXED ALUMINIUM ELECTROLYTIC 5 CAPACITORS WITH NON-SOLID ELECTROLYTE 6 (Other shapes are permitted within the dimensions given.) Assessment level(s): EZ 8 Performance grade: Information on the availability of components qualified to this detail specification is g
29、iven in the IEC QC 001005. 9 BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)1 General data 1.1 Recommended method(s) of mounting (to be inserted) See 1.4.2 of IEC 60384-4. 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions mm Case size reference L H d NOTE 1 When there is no case size re
30、ference, Table 1 may be omitted and the dimensions given in Table 2, which then becomes Table 1. NOTE 2 The dimensions are given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Capacitance range (see Table 2) Tolerance on rated capacitance Rated volta
31、ge (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Rated ripple current (see Table 3) Tangent of loss angle (see Table 3) NOTE Instead of the tangent of loss angle (tan ), the equivalent series resistance ESR may be specified in accordance with 4.3.3.
32、2d) of IEC 60384-4. Leakage current Impedance (if applicable) (see Table 3) Reverse voltage (if required) Insulation resistance (if applicable) Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltageaCase size Case size Case size Case size Rated capacitance
33、F aIf different from the rated voltage. BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)Table 3 Tangent of loss angle, impedance and rated ripple current URV CRF Tangent of loss angle at. C,. Hz Impedance at. C, . Hz (if applicable) Rated ripple current at. C,. Hz A 1.4 Normative references The following r
34、eferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60384-1, Fixed capacitors for use in electronic equipment Pa
35、rt 1: Generic specification IEC 60384-4, Fixed capacitors for use in electronic equipment Part 4: Sectional specification Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte IEC 60410, Sampling plans and procedures for inspection by attributes 1.5 Marking The marking of the
36、 capacitor and the package shall be in accordance with the requirements of 1.6 of IEC 60384-4. The details of the marking of the component and package are given in full in the detail specification. 1.6 Ordering information Orders for capacitors covered by this specification shall contain, in clear o
37、r in coded form, the following minimum information. a) Rated capacitance. b) Tolerance on rated capacitance. c) Rated d.c. voltage. d) Number and issue reference of the detail specification and style reference. 1.7 Certified records of released lots Required/not required. 1.8 Additional information
38、(not for inspection purposes) 1.9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification NOTE Additions or increased requirements should be specified only when essential. Table 4 Other characteristics This table is to be used for defining
39、characteristics which are additional to, or more severe than, those given in the sectional specification. BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)2 Inspection requirements 2.1 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with 3.4 of the sectional specification,
40、 IEC 60384-4. 2.1.2 For quality conformance inspection, the test schedule (Table 5) includes sampling, periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1 of the sectional specification. Table 5 Test schedule for qualification conformance inspection Subclau
41、se number and testaDbor NDConditions of test aILbnbcbPerformance requirementsaGroup A inspection (lot-by-lot) Subgroup A1 ND S-3cc0 4.2 Visual examination As in 4.2 Legible marking and as specified in 1.5 of this specification 4.2 Dimensions (gauging) As specified in Table 1 of this specification Su
42、bgroup A2 ND S-3c c0 4.3.1 Leakage Protective resistance: As in 4.3.1.2 4.3.2 Capacitance Frequency: Hz Within specified tolerance 4.3.3 Tangent of loss angle Frequency: Hz As in 4.3.3.2 4.3.4 Impedance (if applicable) Frequency: Hz Within limit specified in the detail specification a Subclause numb
43、er of tests and performance requirements refer to IEC 60384-4 and Clause 1 of this specification. b In this table, IL = inspection level (IEC 60410) n = sample size c = permissible number of non-conforming items p = periodicity in months D = destructive ND = non-destructivec Number to be tested: Sam
44、ple size as directly allotted to the code letter for IL in Table 2A of IEC 60410. BS EN 60384-4-1:2007EN 60384-4-1:2007 (E)Table 5 (continued) Subclause number and testaDbor NDConditions of testaILbnbcbPerformance requirementsa eGroup B inspection (lot-by-lot) Subgroup B1 ND S-3cc0 4.6 Solderability
45、dMethod:. Good tinning as evidenced by free flowing of the solder with wetting of the terminations or meet the required parameter(s) in the detail specification as applicable 4.17.1 Initial measurement Capacitance 4.17 Storage at high temperature (if required) Temperature: Upper category temperature
46、 Duration: 96 h 4 h Recovery: 16 h min. 4.17.3 Final measurements Visual examination No visible damage and no leakage of electrolyte Leakage current 2 times the limits in 4.3.1 Capacitance C/C 10 % of value measured in 4.17.1 Tangent of loss angle 1,2 times the limit in 4.3.3 Subgroup B2 ND S-3cc0 4
47、.19 Characteristics at high and low temperature The capacitors shall be measured at each temperature step Step 1: 20 C Impedance (at same frequency as Step 2) Step 2: Lower category temperature Impedance Ratio with respect to value in Step 1 Rated voltage V Ratio of impedanceUR 6,3 6,3 315 V Duratio
48、n of charge: 30 s Duration of non-load: 5 min 30 s 4.14.1 Initial measurement Capacitance 4.14.3 Final measurements Visual examination No visible damage and no leakage of electrolytedLeakage current As in 4.3.1 Capacitance C/C 15 % of value measured in 4.14.1 Tangent of loss angle As in 4.3.3 Subgro
49、up C4B D 12 6 0 0 4.15 Reverse voltage (if required) Duration: 125 h, at upper category temperature with a direct voltage of 1 V d.c. in reverse polarity direction, unless otherwise specified in the detail specification, followed by 125 h at upper category temperature with category voltage in forward polarity direction 4.15.1 Initial measurement Capacitance 4.15.3 Final measurements Leakage current As in 4.3.1 Capacitan
