1、BSI Standards PublicationAlarm and electronic security systemsPart 11-2: Electronic access control systems Application guidelinesBS EN 60839-11-2:2015BS EN 60839-11-2:2015Incorporating corrigendum November 2015BS EN 60839-11-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK imp
2、lementation of EN 60839-11-2:2015, incorporating corrigendum November 2015. It is identical to IEC 60839-11-2:2014. It supersedes BS EN 50133-7:1999 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GW/1.A list of organizations represented on this commit
3、tee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 91876 6ICS 13.320C
4、ompliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2015.Amendments/corrigenda issued since publicationDate Text affected31 December 2015 Implementation of C
5、ENELEC corrigendum November 2015: Supersession information added to EN title page and European ForewordEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60839-11-2 April 2015 ICS 13.320 English Version Alarm and electronic security systems - Part 11-2: Electronic access control systems - Application
6、 guidelines (IEC 60839-11-2:2014) Systmes dalarme et de scurit lectroniques - Partie 11-2: Systmes de contrle daccs lectronique - Lignesdirectrices dapplication (IEC 60839-11-2:2014) Alarmanlagen - Teil 11-2: ElektronischeZutrittskontrollanlagen - Anwendungsregeln(IEC 60839-11-2:2014) This European
7、Standard was approved by CENELEC on 2015-04-07. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references con
8、cerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC
9、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu
10、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardizati
11、on Comit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60839-11-2:2015
12、 E Supersedes EN 50133-7:1999EN 60839-11-2:2015 - 2 - Foreword This document (EN 60839-11-2:2015) consists of the text of IEC 60839-11-2:2014 prepared by IEC/TC 79 “Alarm and electronic security systems“. The following dates are fixed: latest date by which the document has to be implemented at natio
13、nal level by publication of an identical national standard or by endorsement (dop) 2016-04-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-04-13 Attention is drawn to the possibility that some of the elements of this document may be the su
14、bject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60839-11-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for
15、Bibliography, the following notes have to be added for the standards indicated: IEC 60950-1 NOTE Harmonized as EN 60950-1. IEC 61000-6-1 NOTE Harmonized as EN 61000-6-1. IEC 61000-6-3 NOTE Harmonized as EN 61000-6-3 BS EN 60839-11-2:2015This document supersedes EN 50133-7:1999.EN 60839-11-2:2015 - 2
16、 - Foreword This document (EN 60839-11-2:2015) consists of the text of IEC 60839-11-2:2014 prepared by IEC/TC 79 “Alarm and electronic security systems“. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national s
17、tandard or by endorsement (dop) 2016-04-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-04-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall no
18、t be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60839-11-2:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added
19、for the standards indicated: IEC 60950-1 NOTE Harmonized as EN 60950-1. IEC 61000-6-1 NOTE Harmonized as EN 61000-6-1. IEC 61000-6-3 NOTE Harmonized as EN 61000-6-3 BS EN 60839-11-2:2015- 3 - EN 60839-11-2:2015 Annex ZA (normative) Normative references to international publications with their corres
20、ponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an
21、y amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publicatio
22、n Year Title EN/HD Year IEC 60839-11-1 2013 Alarm and electronic security systems - Part 11-1: Electronic access control systems - System and components requirements EN 60839-11-1 2013 - - +AC 2013 - - +AC 2015 BS EN 60839-11-2:2015 2 IEC 60839-11-2:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION .
23、 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Abbreviations 8 5 System architecture . 8 6 Environmental and EMC considerations . 9 6.1 General . 9 6.2 Environmental Class I Equipment situated in indoor but restricted to residential/office environment . 9 6.3 Environmental Class I
24、I Equipment situated indoor in general 9 6.4 Environmental Class III Equipment situated outdoor Sheltered or indoor extreme conditions 10 6.5 Environmental Class IV Equipment situated outdoor General 10 6.6 EMC . 10 7 System planning 10 7.1 General . 10 7.2 Risk assessment and security grading 11 7.
25、3 System design 12 System and components selection . 12 7.3.1Operational considerations 14 7.3.28 System installation 16 8.1 General . 16 8.2 Installation planning 17 Equipment . 17 8.2.1Cabling 19 8.2.29 Commissioning and system handover 19 9.1 Commissioning . 19 9.2 System handover 20 10 System op
26、eration and maintenance . 20 10.1 System operation 20 10.2 System maintenance . 21 11 Documentation 21 11.1 General . 21 11.2 Documentation for planning 21 11.3 Documentation for commissioning/system handover . 22 11.4 Documentation for maintenance 22 Annex A (normative) Allowed exceptions for insta
27、lled systems . 23 A.1 General . 23 A.2 Claims of compliance 23 A.3 Allowed exceptions . 23 Annex B (informative) Standby battery capacity calculations 27 Bibliography 29 BS EN 60839-11-2:2015 2 IEC 60839-11-2:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 T
28、erms and definitions 7 4 Abbreviations 8 5 System architecture . 8 6 Environmental and EMC considerations . 9 6.1 General . 9 6.2 Environmental Class I Equipment situated in indoor but restricted to residential/office environment . 9 6.3 Environmental Class II Equipment situated indoor in general 9
29、6.4 Environmental Class III Equipment situated outdoor Sheltered or indoor extreme conditions 10 6.5 Environmental Class IV Equipment situated outdoor General 10 6.6 EMC . 10 7 System planning 10 7.1 General . 10 7.2 Risk assessment and security grading 11 7.3 System design 12 System and components
30、selection . 12 7.3.1Operational considerations 14 7.3.28 System installation 16 8.1 General . 16 8.2 Installation planning 17 Equipment . 17 8.2.1Cabling 19 8.2.29 Commissioning and system handover 19 9.1 Commissioning . 19 9.2 System handover 20 10 System operation and maintenance . 20 10.1 System
31、operation 20 10.2 System maintenance . 21 11 Documentation 21 11.1 General . 21 11.2 Documentation for planning 21 11.3 Documentation for commissioning/system handover . 22 11.4 Documentation for maintenance 22 Annex A (normative) Allowed exceptions for installed systems . 23 A.1 General . 23 A.2 Cl
32、aims of compliance 23 A.3 Allowed exceptions . 23 Annex B (informative) Standby battery capacity calculations 27 Bibliography 29 BS EN 60839-11-2:2015IEC 60839-11-2:2014 IEC 2014 3 Figure 1 Typical arrangement of components and interfaces of an EACS . 9 Figure 2 Risk assessment chart . 11 Figure 3 E
33、xample of system grade selection 13 Figure 4 Equipment location versus security grade of protected area . 17 Table 1 Security grading 12 Table 2 Power supply requirements for installed EACS 18 Table A.1 Allowed exceptions for access point interface requirements . 24 Table A.2 Allowed exceptions for
34、indication and annunciation requirements . 24 Table A.3 Allowed exceptions for recognition requirements 25 Table A.4 Duress signalling requirements 25 Table A.5 Overriding requirements . 25 Table A.6 Communication requirements . 25 Table A.7 Allowed exceptions for system self-protection requirements
35、 . 25 Table A.8 Allowed exceptions for power supply requirements 26 BS EN 60839-11-2:2015 4 IEC 60839-11-2:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ALARM AND ELECTRONIC SECURITY SYSTEMS Part 11-2: Electronic access control systems Application guidelines FOREWORD 1) The International
36、 Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fi
37、elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any I
38、EC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardiza
39、tion (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has represen
40、tation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC ca
41、nnot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publicati
42、ons. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, a
43、ccess to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including i
44、ndividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance up
45、on, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements
46、 of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60839-11-2 has been prepared by IEC technical committee 79: Alarm and electronic security systems. The text of this standard is ba
47、sed on the following documents: FDIS Report on voting 79/476/FDIS 79/489/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN
48、60839-11-2:2015 4 IEC 60839-11-2:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ALARM AND ELECTRONIC SECURITY SYSTEMS Part 11-2: Electronic access control systems Application guidelines FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standar
49、dization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publica
