1、BSI Standards PublicationMetallic communication cable test methodsPart 4-7: Electromagnetic compatibility (EMC) Test method for measuring of transfer impedance ZTand screening attenuation asor coupling attenuation acof connectors and assemblies up to and above 3 GHz Triaxial tube in tube methodBS EN
2、 62153-4-7:2016National forewordThis British Standard is the UK implementation of EN 62153-4-7:2016. It is identical to IEC 62153-4-7:2015. It supersedes BS EN 62153-4-7:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and wave
3、guides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its c
4、orrect application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 83136 2ICS 33.100.01; 33.120.10Compliance with a British Standard cannot confer immunity fromlegal obligations.T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h
5、e a u t h o r i t y o f t h eS t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n 31 March 2 0 1 6 .Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62153-4-7:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62153-4-7 March 2016 ICS 3
6、3.100; 33.120.10 Supersedes EN 62153-4-7:2006 English Version Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZTand screening attenuation asor coupling attenuation acof connectors and assemblies up to and abo
7、ve 3 GHz - Triaxial tube in tube method (IEC 62153-4-7:2015) Mthodes dessai des cbles mtalliques de communication - Partie 4-7: Compatibilit lectromagntique (CEM) - Mthode dessai pour mesurer limpdance de transfert ZTet laffaiblissement dcrantage asou laffaiblissement de couplage aCdes connecteurs e
8、t des cordons jusqu 3 GHz et au-dessus - Mthode triaxiale en tubes concentriques (IEC 62153-4-7:2015) Prfverfahren fr metallische Kommunikationskabel - Teil 4-7: Geschirmtes Prfverfahren zur Messung von Kopplungswiderstand ZTund von Schirm as- oder Kopplungsdmpfung acvon HF-Steckverbindern und konfe
9、ktionierten Kabeln bis zu und ber 3 GHz - Rohr-im-Rohr-Verfahren (IEC 62153-4-7:2015) This European Standard was approved by CENELEC on 2016-01-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu
10、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French,
11、 German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Be
12、lgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed
13、en, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploit
14、ation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62153-4-7:2016 E BS EN 62153-4-7:2016EN 62153-4-7:2016 2 European foreword The text of document 46/572/FDIS, future edition 2 of IEC 62153-4-7, prepared by IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.
15、F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62153-4-7:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard
16、or by endorsement (dop) 2016-10-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-13 This document supersedes EN 62153-4-7:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
17、 rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62153-4-7:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62153-4-7:2016EN 62153-4-7:2016 3 Annex
18、 ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies.
19、 For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the E
20、uropean Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC/TS 62153-4-1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic screening measurements - - IEC 62153-4-3 - Metalli
21、c communication cable test methods - Part 4-3: Electromagnetic Compatibility (EMC) - Surface transfer impedance - Triaxial method - - IEC 62153-4-4 - Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Shielded screening attenuation, test method for measuring
22、of the screening attenuation as up to and above 3 GHz - - IEC 62153-4-15 - Metallic communication cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell - - BS EN 62153-
23、4-7:2016 2 IEC 62153-4-7:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 Physical background 10 5 Principle of the test methods . 10 5.1 General . 10 5.2 Transfer impedance 12 5.3 Screening attenuation . 12 5.4 Coupling attenuation
24、. 12 6 Test procedure 13 6.1 General . 13 6.2 Tube in tube procedure . 13 6.3 Test equipment . 14 6.4 Calibration procedure 15 6.5 Connection between extension tube and device under test . 15 6.6 Dynamic range respectively noise floor . 15 6.7 Impedance matching . 16 6.8 Influence of Adapters 16 7 S
25、ample preparation . 17 7.1 Coaxial connector or device 17 7.2 Balanced or multiconductor device 17 7.3 Cable assembly 19 8 Measurement of transfer impedance 19 8.1 General . 19 8.2 Principle block diagram of transfer impedance 19 8.3 Measuring procedure Influence of connecting cables . 19 8.4 Measur
26、ing . 20 8.5 Evaluation of test results . 20 8.6 Test report 20 9 Screening attenuation 21 9.1 General . 21 9.2 Impedance matching . 21 9.2.1 General . 21 9.2.2 Evaluation of test results with matched conditions . 22 9.2.3 Measuring with mismatch. 22 9.2.4 Evaluation of test results . 22 9.3 Test re
27、port 23 10 Coupling attenuation 23 10.1 Procedure . 23 10.2 Expression of results 24 10.3 Test report 24 10.4 Balunless procedure . 25 Annex A (normative) Determination of the impedance of the inner circuit . 26 BS EN 62153-4-7:2016IEC 62153-4-7:2015 IEC 2015 3 Annex B (informative) Example of a sel
28、f-made impedance matching adapter . 27 Annex C (informative) Measurements of the screening effectiveness of connectors and cable assemblies . 29 C.1 General . 29 C.2 Physical basics . 29 C.2.1 General coupling equation . 29 C.2.2 Coupling transfer function 31 C.3 Triaxial test set-up 33 C.3.1 Genera
29、l . 33 C.3.2 Measurement of cable assemblies . 34 C.3.3 Measurement of connectors . 35 C.4 Conclusion 38 Annex D (informative) Influence of contact resistances 39 Bibliography 41 Figure 1 Definition of ZT9 Figure 2 Principle of the test set-up to measure transfer impedance and screening or coupling
30、attenuation of connectors with tube in tube . 11 Figure 3 Principle of the test set-up to measure transfer impedance and screening attenuation of a cable assembly 14 Figure 4 Principle set-up for verification test 16 Figure 5 Preparation of balanced or multiconductor connectors . 18 Figure 6 Test se
31、t-up (principle) for transfer impedance measurement according to test method B of IEC 62153-4-3 19 Figure 7 Measuring the screening attenuation with tube in tube with impedance matching device 21 Figure 8 Measuring the coupling attenuation with tube in tube and balun . 24 Figure 9 Typical measuremen
32、t of a connector of 0,04 m length with 1 m extension tube 25 Figure 10 Measuring the coupling attenuation with multiport VNA (balunless procedure is under consideration) . 25 Figure B.1 Attenuation and return loss of a 50 to 5 impedance matching adapter, log scale . 27 Figure B.2 Attenuation and ret
33、urn loss of a 50 to 5 impedance matching adapter, lin scale 28 Figure C.1 Equivalent circuit of coupled transmission lines 30 Figure C.2 Summing function S 31 Figure C.3 Calculated coupling transfer function (l = 1 m; er1= 2,3; er2= 1; ZF = 0) 32 Figure C.4 Triaxial set-up for the measurement of the
34、 screening attenuation aSand the transfer impedance ZT33 Figure C.5 Simulation of a cable assembly (logarithmic scale) . 35 Figure C.6 Simulation of a cable assembly (linear scale) . 35 Figure C.7 Triaxial set-up with extension tube for short cable assemblies 36 Figure C.8 Triaxial set-up with exten
35、sion tube for connectors . 36 Figure C.9 Simulation, logarithmic frequency scale 37 Figure C.10 Measurement, logarithmic frequency scale . 37 Figure C.11 Simulation, linear frequency scale. 37 BS EN 62153-4-7:2016 4 IEC 62153-4-7:2015 IEC 2015 Figure C.12 Measurement, linear frequency scale 37 Figur
36、e C.13 Simulation, logarithmic frequency scale 38 Figure C.14 simulation, linear frequency scale . 38 Figure D.1 Contact resistances of the test set-up . 39 Figure D.2 Equivalent circuit of the test set-up . 39 Table 1 IEC 62153, Metallic communication cable test methods Test procedures with triaxia
37、l test set-up 11 BS EN 62153-4-7:2016IEC 62153-4-7:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ METALLIC COMMUNICATION CABLE TEST METHODS Part 4-7: Electromagnetic compatibility (EMC) Test method for measuring of transfer impedance ZTand screening attenuation as or coupling attenuatio
38、n aCof connectors and assemblies up to and above 3 GHz Triaxial tube in tube method FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to p
39、romote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guid
40、es (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC a
41、lso participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as pos
42、sible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. W
43、hile all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertak
44、e to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attesta
45、tion of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of
46、this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or
47、indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable fo
48、r the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62153-4-7 has bee
49、n prepared by IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The document is revised and updated. The changes of the
