1、BSI Standards PublicationDigital addressable lighting interfacePart 201: Particular requirements for control gear Fluorescent lamps (device type 0)BS EN 62386-201:2015National forewordThis British Standard is the UK implementation of EN 62386-201:2015. It isidentical to IEC 62386-201:2015. It supers
2、edes BS EN 62386-201:2009, whichwill be withdrawn on 1 July 2018.The UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained onreq
3、uest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 83676 3ICS 29.140.50; 29.140.99Compliance with
4、 a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62386-201:2015EUROPEAN STANDA
5、RD NORME EUROPENNE EUROPISCHE NORM EN 62386-201 July 2015 ICS 29.140.50; 29.140.99 Supersedes EN 62386-201:2009 English Version Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) (IEC 62386-201:2015) Interface dclairage adr
6、essable numrique - Partie 201: Exigences particulires pour les appareillages - Lampes fluorescentes (dispositifs de type 0) (IEC 62386-201:2015) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 201: Besondere Anforderungen an Betriebsgerte - Leuchtstofflampen (Gertetyp 0) (IEC 62386-201
7、:2015) This European Standard was approved by CENELEC on 2015-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra
8、phical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
9、ibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland
10、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrot
11、echnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref.
12、 No. EN 62386-201:2015 E BS EN 62386-201:2015EN 62386-201:2015 2 European foreword The text of document 34C/1082/CDV, future edition 2 of IEC 62386-201, prepared by SC 34C “Auxiliaries for lamps“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approved b
13、y CENELEC as EN 62386-201:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-04-01 latest date by which the national standards conflicting with the document have
14、to be withdrawn (dow) 2018-07-01 This document supersedes EN 62386-201:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorseme
15、nt notice The text of the International Standard IEC 62386-201:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62386-201:2015EN 62386-201:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications
16、The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1
17、When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61
18、347 series Lamp controlgear EN 61347 series IEC 62386-101 2014 Digital addressable lighting interface - Part 101: General requirements - System Components EN 62386-101 2014 IEC 62386-102 2014 Digital addressable lighting interface - Part 102: General requirements - Control gear EN 62386-102 2014 BS
19、EN 62386-201:2015 2 IEC 62386-201:2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General . 6 5 Electrical specification . 7 6 Interface power supply 7 7 Transmission protocol structure . 7 8 Timing . 7 9 Method of operation . 7 10
20、Declaration of variables . 7 11 Definition of commands . 8 12 Test procedures 8 Figure 1 IEC 62386 graphical overview 5 Table 1 Declaration of additional variables . 8 BS EN 62386-201:2015IEC 62386-201:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE
21、 Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to
22、 promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Gu
23、ides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC
24、 also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as p
25、ossible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense.
26、 While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undert
27、ake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attes
28、tation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition o
29、f this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct o
30、r indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
31、for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-201 has b
32、een prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The essential changes with respect to the first edition are: referen
33、ces to subclauses in IEC 62386-101 and IEC 62386-102 updated to the new structure of the standard; test sequence reworked and description of the test sequences in form of a pseudo code instead of flow charts. BS EN 62386-201:2015 4 IEC 62386-201:2015 IEC 2015 The text of this standard is based on th
34、e following documents: CDV Report on voting 34C/1082/CDV 34C/1103/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This Part 201 of IEC 62386 is intended to be used in conjunction with: IEC 62386-101, which contai
35、ns general requirements for system components; IEC 62386-102, which contains general requirements for the control gear. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the
36、 stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date.
37、IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62386-201:2015IEC 62386-201:2015 IEC 201
38、5 5 INTRODUCTION IEC 62386 contains several parts, referred to as series. The 1xx series includes the basic specifications. Part 101 contains general requirements for system components, Part 102 extends this information with general requirements for control gear and Part 103 extends it further with
39、general requirements for control devices. The 2xx parts extend the general requirements for control gear with lamp specific extensions (mainly for backward compatibility with Edition 1 of IEC 62386) and with control gear specific features. The 3xx parts extend the general requirements for control de
40、vices with input device specific extensions describing the instance types as well as some common features that can be combined with multiple instance types. The setup of the standard is graphically represented in Figure 1 below. Figure 1 IEC 62386 graphical overview This second edition of IEC 62386-
41、201 is published in conjunction with the second edition of IEC 62386-101 and the second edition of IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recog
42、nized. This International Standard, and the other parts that make up the IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be performed; the parts also include ad
43、ditional requirements, as necessary. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “The requirements of fluorescent lamp control gear (device type 0) shall conform to IEC 62386-1xx, Clause “n”, this sente
44、nce is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by Part 201. All numbers used in this International Standard are decimal numbers unless otherwise not
45、ed. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x“ in binary numbers means “dont care“. IEC 101 General requirements System components 103 General requirements Control device
46、s 102 General requirements Control gear 2xx 2xx 2xx 2xx 2xx 3xx 3xx 3xx 3xx 3xx BS EN 62386-201:2015 6 IEC 62386-201:2015 IEC 2015 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 201: Particular requirements for control gear Fluorescent lamps (device type 0) 1 Scope This part of IEC 62386 specifies a bu
47、s system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347. This document is applicable to control gear associated with fluorescent lamps. NOTE Tests in this standard are type tests. Requirements f
48、or testing individual bus units during production are not included. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references
49、, the latest edition of the referenced document (including any amendments) applies. IEC 61347 (all parts), Lamp controlgear IEC 62386-101:2014, Digital addressable lighting interface Part 101: General requirements System components IEC 62386-102:2014, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2014 and Clause 3 o
