1、BSI Standards PublicationBS ISO 12679:2011Thermal spraying Recommendations for thermalsprayingBS EN ISO 12679:2015BS EN ISO 12679:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 12679:2015. It is identical to ISO 12679:2011. It supersedes BS EN 14616:20
2、04 and BS ISO 12679:2011 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee STI/40, Thermal spraying and thermally sprayed coatings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does no
3、t purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 89465 7ICS 25.220.20Compliance with a British Standard cannot confer immunity from legal o
4、bligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2012.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 This corrigendum renumbers BS ISO 12679:2011 as BS EN ISO 12679:2015.EUROPEAN STANDARD NO
5、RME EUROPENNE EUROPISCHE NORM EN ISO 12679 October 2015 ICS 25.220.20 Supersedes EN 14616:2004English Version Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) Projection thermique - Recommandations pour la projection thermique (ISO 12679:2011) Thermisches Spritzen - Empfehlun
6、gen fr das thermische Spritzen (ISO 12679:2011) This European Standard was approved by CEN on 27 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any al
7、teration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language m
8、ade by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Est
9、onia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STA
10、NDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12679:2015 EBS EN ISO 12679:2015EN
11、 ISO 12679:2015 (E) 3 European foreword The text of ISO 12679:2011 has been prepared by Technical Committee ISO/TC 107 “Metallic and other inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 12679:2015 by Technical Committee CEN/TC 240 “T
12、hermal spraying and thermally sprayed coatings” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2016, and conflicting national standards shall be wit
13、hdrawn at the latest by April 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14616:2004. According
14、to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Gree
15、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 12679:2011 has been approved by CEN as EN ISO 12679:2015 witho
16、ut any modification. BS EN ISO 12679:2015EN ISO 12679:2015 (E)BS ISO 12679:2011ISO 12679:2011(E)Contents PageForeword ivIntroduction v1 Scope 12 Normative references .13 Terms and definitions .24 Parent material .25 Component geometry .36 Spray materials 36.1 General .36.2 Selection of spray materia
17、ls .36.3 Supply, handling and storage 47 Gases for spraying 48 Liquid fuels for spraying .59 Spray equipment .59.1 General .59.2 Spray device .59.3 Mechanical equipment, rotating devices, handling systems, robots .59.4 Essential auxiliary equipment 510 Surface preparation prior to spraying .610.1 Ge
18、neral .610.2 General pretreatments, degreasing, cleaning .610.3 Grit-blasting and other preparation methods 610.4 Covering, masking of areas not to be coated 711 Thermal spraying procedure 711.1 Spraying procedure specification .711.2 Applying the spraying process .812 Post-treatment of the coating
19、913 Health, safety and environmental aspects .1014 Recommendations for quality assurance .1014.1 Quality-assurance measures .1014.2 Personnel qualification 1215 Testing of components and accompanying specimens .1215.1 General .1215.2 Tests on the component itself 12Bibliography .14 ISO 2011 All righ
20、ts reserved iiiBS EN ISO 12679:2015ISO 12679:2011(E)BS ISO 12679:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technica
21、l committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely wit
22、h the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft Interna
23、tional Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be
24、 the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 12679 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.ISO 12679:2011(E)iv ISO 2011 All rights reservedBS EN ISO 12679:2015ISO 12679:2011(E)BS ISO 1
25、2679:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for w
26、hich a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
27、 matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are cir
28、culated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respons
29、ible for identifying any or all such patent rights.ISO 12679 was prepared by Technical Committee ISO/TC 107, Metallic and other inorganic coatings.ISO 12679:2011(E)iv ISO 2011 All rights reservedBS ISO 12679:2011IntroductionThermal spraying encompasses processes used in the production of coatings an
30、d free-standing bodies for which spray materials are surface-melted, melted off or melted and then propelled onto suitably prepared workpiece surfaces. The workpiece surfaces are not surface-melted. In order to achieve specific coating properties, the spray coating can undergo additional post-treatm
31、ent, either thermal or otherwise, for example, sealing.Thermally sprayed coatings serve to improve the surface properties of a workpiece by manufacturing or repair operations. This can be done, for example, in relation to wear, corrosion, heat transfer or heat insulation, electrical conductivity or
32、insulation, appearance and/or for restoring the part to working order. In certain cases, a spray coating can render a surface solderable.Chiefly due to their bonding mechanism, thermally sprayed coatings without thermal post-treatment can be distinguished from coatings applied with other processes,
33、such as deposition welding, brazing, physical vapour deposition (PVD) or chemical vapour deposition (CVD).The advantages of thermal spraying are the following. T he workpieces to be coated are only slightly heated so that distortion and any other undesired structural changes to the parent material a
34、re avoided. This does not apply if the coatings are thermally treated during or after the spraying process. T he application is not dependent on the size of the workpiece or component. The operation can be stationary or mobile depending on the spraying process. E ven geometrically complex components
35、 can be coated using the appropriate spray set-up. T he untreated surface of spray coatings generally provides a good bond coat for painting. D epending on the spraying process and spray material, different coating thicknesses can be applied, although a coating thickness of approximately 10 m is cur
36、rently considered to be the lower limit.Process-related disadvantages are as follows: t he bond strength of thermally sprayed coatings without thermal post-treatment derives from adhesive forces only; t he bond strength can be influenced due to an expansion mismatch between the coating and substrate
37、 material, especially in the case of a high operation temperature; s pray coatings are micro-porous; t he thicker the spray coating, the higher the residual stresses in the coating, and the degree of multi-axial stress thus increases; s pray coatings without additional thermal post-treatment are sen
38、sitive to edge pressure, localized and linear loads and to impact stresses; t here are restrictions in relation to the geometric dimensions, for example, for the inner coatings of workpieces whose inner diameter is too small.ISO 12679:2011(E) ISO 2011 All rights reserved vBS EN ISO 12679:2015ISO 126
39、79:2011(E)BS ISO 12679:2011BS EN ISO 12679:2015BS ISO 12679:2011 BS ISO 12679:2011INTERNATIONAL STANDARD ISO 12679:2011(E)Thermal spraying Recommendations for thermal spraying1 ScopeThis International Standard includes general guidelines for the workmanlike production of metallic, metal-ceramic, oxi
40、de-ceramic and plastic coatings, by means of thermal spraying on metallic and non-metallic parent materials.This International Standard provides recommendations for an appropriate and practical spray set-up, faultless manufacturing, monitoring, quality assurance and for non-destructive and destructi
41、ve tests on the component and accompanying specimen. It describes details about negative effects which can occur. It also gives advice on how to prevent such effects.Permissible coating loads and evaluation categories for quality are not the subject of this International Standard, as they are depend
42、ent on the operating conditions.This International Standard can be used for contract purposes.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edit
43、ion of the referenced document (including any amendments) applies.ISO 3452-1, Non-destructive testing Penetrant testing Part 1: General principlesISO 14231, Thermal spraying Acceptance inspection of thermal spraying equipmentISO 14232, Thermal spraying Powders Composition and technical supply condit
44、ionsISO 14918, Thermal spraying Approval testing of thermal sprayersISO 14919, Thermal spraying Wires, rods and cords for flame and arc spraying Classification Technical supply conditionsISO 14920, Thermal spraying Spraying and fusing of self-fluxing alloysISO 14921, Thermal spraying Procedures for
45、the application of thermally sprayed coatings for engineering componentsISO 14922-1, Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and useISO 14922-2, Thermal spraying Quality requirements of thermally sprayed structures Part 2: Comprehensive qu
46、ality requirementsISO 14922-3, Thermal spraying Quality requirements of thermally sprayed structures Part 3: Standard quality requirementsISO 14922-4, Thermal spraying Quality requirements of thermally sprayed structures Part 4: Elementary quality requirementsISO 14923, Thermal spraying Characteriza
47、tion and testing of thermally sprayed coatingsISO 14924, Thermal spraying Post-treatment and finishing of thermally sprayed coatings ISO 2011 All rights reserved 1BS EN ISO 12679:2015BS ISO 12679:20113 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.
48、3.1shot-peening effectpressure strengthening by grit-blasting3.2sound pressure levelmean value of emitted soundNOTE Sound pressure level is measured in decibels (dB).3.3etchingremoving of surface materialNOTE Etching can be applied using liquid agents (wet chemical etching) or using gases in a recip
49、ient (dry etching, plasma etching). The etching agent reacts chemically with the substrate.3.4ion-etchingmaterial removed by shooting the surface with high-energetic particles like ionsNOTE The ions cut off material at the impact point. The procedure is used in plasma technology application (vacuum coating technology).3.5corona dischargedielectric discharge in air after exceeding the break-down field intensity; air molecules will be ionized by generating short-living ozone4 Parent materialVirtually every kind
