1、Floating leisure articles for use on and in the waterPart 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017)BS EN ISO 25649-4:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPIS
2、CHE NORM EN ISO 25649-4 October 2017 ICS 97.220.40 Supersedes EN 15649-4:2010+A1:2012English Version Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) Articles de loisirs flottants utiliser
3、sur ou dans leau - Partie 4: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe B (ISO 25649-4:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 4: Zustzliche spezifische sicherheitstechnische Anforderungen und Prfverfahren fr Klasse B-Gerte
4、(ISO 25649-4:2017)This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
5、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respon
6、sibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Repu
7、blic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN
8、DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25649-4:2017 ENational forewordThis British Standard is the U
9、K implementation of EN ISO 25649-4:2017. It is identical to ISO 25649-4:2017. It supersedes BS EN 15649-4:2010+A1:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SW/136/8, Swimming pools and aquatic equipment.A list of organizations represented o
10、n this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 88117
11、6ICS 97.220.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS
12、EN ISO 256494:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 25649-4 October 2017 ICS 97.220.40 Supersedes EN 15649-4:2010+A1:2012English Version Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices
13、 (ISO 25649-4:2017) Articles de loisirs flottants utiliser sur ou dans leau - Partie 4: Exigences de scurit et mthodes dessai complmentaires propres aux dispositifs de Classe B (ISO 25649-4:2017) Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 4: Zustzliche spezifische sicherheitst
14、echnische Anforderungen und Prfverfahren fr Klasse B-Gerte (ISO 25649-4:2017)This European Standard was approved by CEN on 24 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national
15、 standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version
16、 in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czec
17、h Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kin
18、gdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 25
19、649-4:2017 EBS EN ISO 256494:2017EN ISO 25649-4:2017 (E) 3 European foreword This document (EN ISO 25649-4:2017) has been prepared by Technical Committee ISO/TC 83 “Sports and other recreational facilities and equipment” in collaboration with Technical Committee CEN/TC 136 “Sports, playground and ot
20、her recreational facilities and equipment” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be withdraw
21、n at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 15649-4:2010+A1:2012. This document has be
22、en prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, C
23、roatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, T
24、urkey and the United Kingdom. Endorsement notice The text of ISO 25649-4:2017 has been approved by CEN as EN ISO 25649-4:2017 without any modification. ISO 25649-4:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety requirements and test methods . 3
25、4.1 General . 34.2 Sizing . 34.2.1 Sizing of B1 devices, fit to users body and test probes 34.2.2 Sizing of B2.1 (Being in type) devices, loose fit to body 54.2.3 Sizing of B2.2 (Sitting on type) devices, loose fit to the body . 54.3 Strength of entire device B1 64.3.1 Requirement 64.3.2 Strength of
26、 entire device B1, Test method . 74.4 In-water performance of class B1 devices 74.4.1 In water behaviour, static floating stability of B1 devices for children of four years to five years and six years to eight years 74.4.2 In water behaviour, static floating stability of B1 devices for children of a
27、bove eight years of age (test panel of human test subjects, device fully inflated) 104.4.3 In water behaviour, dynamic stability for B1 devices intended for children of four years to five years and six years to seven years of age (30 kg).114.4.4 Residual buoyancy and retention of function of Class B
28、1 devices (children up to seven years, 30 kg) 114.4.5 Escape from the B1 device (body entrapment, leg/foot entanglement) 124.5 In-water performance of class B2 devices . 124.5.1 In water behaviour, static floating stability of B2 devices for children up to five years and six years to seven years 124
29、.5.2 In water behaviour, static floating stability of B2 devices for children of above seven years of age (30 kg) 154.5.3 Residual buoyancy and retention of function of Class B2 devices for children of three years (above 36 months) up to five years (60 months) and six years to eight years (72 months
30、 to 96 months) of age .154.5.4 Escape from the B2 device (body entrapment, leg/foot entanglement) 155 Exclusions .16Annex A (informative) Optional manikin testing for swim seats as one possible embodiment of class B1 devices, requirements .17Annex B (informative) Examples of products forming Class B
31、 .22Bibliography .24 ISO 2017 All rights reserved iiiContents PageBS EN ISO 256494:2017ISO 25649-4:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Safety requirements and test methods . 34.1 General . 34.2 Sizing . 34.2.1 Sizing of B1 devices, fit to u
32、sers body and test probes 34.2.2 Sizing of B2.1 (Being in type) devices, loose fit to body 54.2.3 Sizing of B2.2 (Sitting on type) devices, loose fit to the body . 54.3 Strength of entire device B1 64.3.1 Requirement 64.3.2 Strength of entire device B1, Test method . 74.4 In-water performance of cla
33、ss B1 devices 74.4.1 In water behaviour, static floating stability of B1 devices for children of four years to five years and six years to eight years 74.4.2 In water behaviour, static floating stability of B1 devices for children of above eight years of age (test panel of human test subjects, devic
34、e fully inflated) 104.4.3 In water behaviour, dynamic stability for B1 devices intended for children of four years to five years and six years to seven years of age (30 kg).114.4.4 Residual buoyancy and retention of function of Class B1 devices (children up to seven years, 30 kg) 114.4.5 Escape from
35、 the B1 device (body entrapment, leg/foot entanglement) 124.5 In-water performance of class B2 devices . 124.5.1 In water behaviour, static floating stability of B2 devices for children up to five years and six years to seven years 124.5.2 In water behaviour, static floating stability of B2 devices
36、for children of above seven years of age (30 kg) 154.5.3 Residual buoyancy and retention of function of Class B2 devices for children of three years (above 36 months) up to five years (60 months) and six years to eight years (72 months to 96 months) of age .154.5.4 Escape from the B2 device (body en
37、trapment, leg/foot entanglement) 155 Exclusions .16Annex A (informative) Optional manikin testing for swim seats as one possible embodiment of class B1 devices, requirements .17Annex B (informative) Examples of products forming Class B .22Bibliography .24 ISO 2017 All rights reserved iiiContents Pag
38、eBS EN ISO 256494:2017ISO 25649-4:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member bo
39、dy interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrot
40、echnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of IS
41、O documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held res
42、ponsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information give
43、n for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) princip
44、les in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.ISO 25649-4 was prepared by the European Committee Standardization (CEN) Technical Committee CEN/TC 136, Sports, playground and other recreational facilities and equipment, in collaboration with ISO Tec
45、hnical Committee TC 83, Sports and other recreational facilities and equipment, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of all the parts in the ISO 25649-series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 25
46、6494:2017ISO 25649-4:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested
47、 in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Comm
48、ission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents s
49、hould be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trad
