1、DRAFT FOR DEVELOPMENTDD CEN ISO/TS 18234-4:2006Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) applicationICS 35.240.60; 03.220.01g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54
2、g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58DD CEN ISO/TS 18234-4:2006This Draft for Development was published under the authority of the Standards Policy and Strategy Committee on 30 June 2006 BSI 2006ISBN 0 580 47040 7National f
3、orewordThis Draft for Development is the official English language version of CEN ISO/TS 18234-4:2006.This publication is not to be regarded as a British Standard.It is being issued in the Draft for Development series of publications and is of a provisional nature because technology in this area is
4、rapidly evolving. It should be applied on this provisional basis, so that information and experience of its practical application may be obtained.Comments arising from the use of this Draft for Development are requested so that UK experience can be reported to the European organization responsible f
5、or its conversion to a European standard. A review of this publication will be initiated 2 years after its publication by the European organization so that a decision can be taken on its status at the end of its 3-year life. Notification of the start of the review period will be made in an announcem
6、ent in the appropriate issue of Update Standards.According to the replies received by the end of the review period, the responsible BSI Committee will decide whether to support the conversion into a European Standard, to extend the life of the Technical Specification or to withdraw it. Comments shou
7、ld be sent in writing to the Secretary of BSI Technical Committee EPL/278, Road transport informatics, at British Standards House, 389 Chiswick High Road, London W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text.A list of organ
8、izations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspon
9、dence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Summary of pagesThis document comprises a front co
10、ver, an inside front cover, the CEN ISO/TS title page, the CEN ISO/TS foreword page, the ISO/TS title page, pages ii to vi, pages 1 to 98, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since pub
11、licationAmd. No. Date CommentsTECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 18234-4 June 2006 ICS 35.240.60; 03.220.01 English Version Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 4: Road Traffic Messag
12、e (RTM) application (ISO/TS 18234-4:2006) Informations sur le trafic et le tourisme (TTI) - Messages TTI via les flux de donnes du groupe dexperts du protocole de transport (TPEG) - Partie 4: Application de message de trafic sur route (RTM) (ISO/TS 18234-4:2006)Reise- und Verkehrsinformation (TTI) )
13、 - TTI ber Datenstrme der Transportprotokoll Expertengruppe (TPEG) - Teil 4: Anwendungen fr Straenverkehrsmeldungen (RTM) (ISO/TS 18234-4:2006)This Technical Specification (CEN/TS) was approved by CEN on 28 September 2004 for provisional application. The period of validity of this CEN/TS is limited
14、initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to ma
15、ke the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached. CEN members are the national standards
16、bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN
17、COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 18234-4: 2006 EForeword
18、 countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech Republic,This document (CEN ISO/TS 18234-4:2006) has been prepared by Technical Committee CEN/TC 278 “Road transport and traffic telematics“, the secretariat of which is held by NEN, in collaboration w
19、ith Technical Committee ISO/TC 204 “Transport information and control systems“. Switzerland and United Kingdom.Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,According to the CEN/CENELEC Internal Regulations, the national standards organizatio
20、ns of the followingLuxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,CEN ISO/TS 18234-4:2006Reference numberISO/TS 18234-4:2006(E)TECHNICAL SPECIFICATION ISO/TS18234-4First edition2006-06-01Traffic and Travel Information (TTI) TTI via Transport Prot
21、ocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application Informations sur le trafic et le tourisme (TTI) Messages TTI via les flux de donnes du groupe dexperts du protocole de transport (TPEG) Partie 4: Application de message de trafic sur route (RTM) CEN ISO/TS 18234-4:2
22、006ii iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Symbols and abbreviations . 4 5 RTM application overview 6 5.1 Introduction . 6 5.2 TPEG-message concept. 8 5.3 TPEG-messages delivering additional information 9 5.4 Elements of a TP
23、EG road traffic message .9 5.5 Message management 11 5.6 Event description 13 5.7 Location Referencing . 14 6 RTM container. 14 6.1 Structure of road traffic messages . 14 6.2 Notation . 16 6.3 RTM application component frame. 17 7 Message management container 18 7.1 Mandatory elements . 18 7.2 Date
24、 and time elements 18 7.3 Severity and reliability elements . 19 7.4 Coding of the message management container 19 8 Event container . 21 8.1 Event description 21 8.2 Level one classes . 21 8.3 Coding of the events container . 26 8.4 RTM application primitives 58 Annex A (informative) Conversion for
25、mulae . 96 Bibliography . 98 CEN ISO/TS 18234-4:2006iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.
26、 Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Interna
27、tional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Stan
28、dards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such document
29、s, a technical committee may decide to publish other types of normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the pare
30、nt committee casting a vote; an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in ord
31、er to decide whether it will be confirmed for a further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be wi
32、thdrawn. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TS 18234-4 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems
33、. ISO/TS 18234 consists of the following parts, under the general title Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams: Part 1: Introduction, numbering and versions Part 2: Syntax, Semantics and Framing Structure (SSF) Part 3: Service and Network Inf
34、ormation (SNI) application Part 4: Road Traffic Message (RTM) application Part 5: Public Transport Information (PTI) application Part 6: Location referencing applications CEN ISO/TS 18234-4:2006vIntroduction TPEG technology uses a byte-oriented stream format, which may be carried on almost any digit
35、al bearer with an appropriate adaptation layer. TPEG-messages are delivered from service providers to end-users, and are used to transfer application data from the database of a service provider to a users equipment. This document describes the Road Traffic Message application in detail. It should b
36、e remembered that the TPEG-RTM has been derived from earlier work that resulted in the RDS-TMC standards (EN ISO 14819-2). Upon analysis, RDS-TMC can be seen to drift into other application areas, where it covers a few public transport, parking and weather messages. TPEG-RTM is just one of several a
37、pplications required to provide a fully comprehensive traffic and travel information service, for example a service is likely to need public transport information, parking information and weather information these are or will be the subject of other TPEG-application specifications. Nevertheless, TPE
38、G-RTM, where reasonable, has included the ability to convey similar content to RDS-TMC, in order to offer considerable backwards compatibility and the prospect of automatically generating RDS-TMC messages from TPEG-RTM messages. The Broadcast Management Committee of the European Broadcast Union (EBU
39、) established the B/TPEG project group in autumn 1997 with the mandate to develop, as soon as possible, a new protocol for broadcasting traffic and travel-related information in the multimedia environment. The TPEG technology, its applications and service features are designed to enable travel-relat
40、ed messages to be coded, decoded, filtered and understood by humans (visually and/or audibly in the users language) and by agent systems. One year later in December 1998, the B/TPEG group produced its first public specifications. Two documents were released. Part 2 (TPEG-SSF, CEN ISO/TS 18234-2) des
41、cribed the Syntax, Semantics and Framing structure, which will be used for all TPEG applications. Part 4 (TPEG-RTM, CEN ISO/TS 18234-4) described the first application, for Road Traffic Messages. CEN/TC 278/WG 4, in conjunction with ISO/TC 204/WG 10, established a project group comprising the member
42、s of B/TPEG and they have continued the work concurrently since March 1999. Since then two further parts have been developed to make the initial complete set of four parts, enabling the implementation of a consistent service. Part 3 (TPEG-SNI, CEN ISO/TS 18234-3) describes the Service and Network In
43、formation Application, which is likely to be used by all service implementations to ensure appropriate referencing from one service source to another. Part 1 (TPEG-INV, CEN ISO/TS 18234-1) completed the work, by describing the other parts and their relationships; it also contains the application IDs
44、 used within the other parts. In April 2000, the B/TPEG group released revised Parts 1 to 4, all four parts having been reviewed and updated in the light of initial implementation results. Thus a consistent suite of specifications, ready for wide scale implementation, was submitted to the CEN/ISO co
45、mmenting process. In November 2001, after extensive response to the comments received and from many internally suggested improvements, all four parts were completed for the next stage: the Parallel Formal Vote in CEN and ISO. But a major step forward has been to develop the so-called TPEG-Loc locati
46、on referencing method, which enables both map-based TPEG-decoders and non map-based ones to deliver either map-based location referencing or human readable information. Part 6 (TPEG-Loc, CEN ISO/TS 18234-6) is now a separate specification and is used in association with the other parts of CEN ISO/TS
47、 18234 to provide comprehensive location referencing. Additionally Part 5, the Public Transport Information Application (TPEG-PTI, CEN ISO/TS 18234-5), has been developed and been through the commenting process. This Technical Specification, CEN ISO/TS 18234-4, provides a full specification provides
48、 a full specification for the Road Traffic Message application. CEN ISO/TS 18234-4:2006vi During the development of the TPEG technology a number of versions have been documented and various trials implemented using various versions of the specifications. At the time of the publication of this Techni
49、cal Specification, all parts are fully inter-workable and no specific dependencies exist. This Technical Specification has the technical version number TPEG-RTM_3.0/003. CEN ISO/TS 18234-4:20061Traffic and Travel Information (TTI) TTI via Transport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM) application 1 Scope This document establishes the method of delivering Road Traffic Messages within a TPEG service. The TPEG-RTM application is designed to allow the efficient and language independent delivery of road
