ETSI EG 201 120-1998 Public Switched Telephone Network (PSTN) Method of Rating Terminal Equipment So That it Can Be Connected in Series and or in Parallel to a Network Termination _1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 4631-2013 en Aerospace series - Steel X4CrNiMo16-5-1 (1 4418) - Air melted - Hardened and tempered - Bar - De 200 mm - 900 MPa Rm 1 050 MPa《航空航天系列 X4CrNiMo16-5-1 (1 4418) 型钢 空气熔.pdf

EN 4632-001-2008 en Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001 General requirements《航空航天系列 航.pdf

EN 4632-002-2008 en Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002 Homogeneous assemblies alumin.pdf

EN 4632-003-2010 en Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003 Welding and brazing of homogeneous assemblies of unalloyed an.pdf

EN 4632-004-2012 en Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004 Welding and brazing of homogeneous assemblies of high alloyed.pdf

EN 4632-005-2009 en Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005 Homogeneous assemblies of heat resisting Ni or Co base alloys.pdf

EN 4632-006-2013 en Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006 Homogeneous assemblies of titanium alloys《航空航天系列 航空航天结构用材料的可焊.pdf

EN 4634-2009 en Aerospace series - Screws 100 degrees countersunk head six lobe recess short thread in heat resisting steel FE-PA2601 (A286) passivated - Classification 900 MPa (at.pdf

EN 4635-2009 en Aerospace series - Screws 100 degrees countersunk head six lobes recess short thread in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification 1 .pdf