1、 ETSI EN 300 440-2 V1.4.1 (2010-08)Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Short range devices;Radio equipment to be usedin the 1 GHz to 40 GHz frequency range;Part 2: Harmonized EN covering the essential requirementsof a
2、rticle 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, inc
3、luding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard
4、(Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document includes improvements to the previous version of the standard that take advantage of technical developments within the SRD industry. In parti
5、cular this includes optional features such as Listen Before Talk (LBT) and Detect And Avoid (DAA). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) i.1 laying down a procedure for the provision o
6、f information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC i.2 of the European Parliament and of
7、the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (“the R Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range, as identified below: Part 1: “Technical characteristics and test met
8、hods“; Part 2: “Harmonized EN covering the essential requirements of article 3.2 of the R 2) Radio Frequency IDentification (RFID); 3) Radiodetermination, including detection, movement and alert applications. These radio equipment types are capable of operating in the permitted frequency bands withi
9、n the 1 GHz to 40 GHz range as specified in table 1: either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna; for all types of modulation; with or without speech. Table 1 shows a list of the frequency bands as designated by the European Commission Decis
10、ions on Short Range Devices i.6, i.7, i.8 and the CEPT/ERC/REC 70-03 i.3 as known at the date of publication of the present document. Table 1: Short Range Devices within the 1 GHz to 40 GHz frequency band Frequency Bands Applications Notes Transmit and Receive 2 400 MHz to 2 483,5 MHz Generic use Tr
11、ansmit and Receive 2 400 MHz to 2 483,5 MHz Detection, movement and alert applications Transmit and Receive (a) 2 446 MHz to 2 454 MHz RFID See annex C of EN 300 440-1 1 Transmit and Receive (b) 2 446 MHz to 2 454 MHz RFID See annex C of EN 300 440-1 1 Transmit and Receive 5 725 MHz to 5 875 MHz Gen
12、eric use Transmit and Receive 9 200 MHz to 9 500 MHz Radiodetermination: radar, detection, movement and alert applications Transmit and Receive 9 500 MHz to 9 975 MHz Radiodetermination: radar, detection, movement and alert applications Transmit and Receive 10,5 GHz to 10,6 GHz Radiodetermination: r
13、adar, detection, movement and alert applications Transmit and Receive 13,4 GHz to 14,0 GHz Radiodetermination: radar, detection, movement and alert applications Transmit and Receive 17,1 GHz to 17,3 GHz Radiodetermination: GBSAR detection, movement and alert applications See annex E of EN 300 440-1
14、1 Transmit and Receive 24,00 GHz to 24,25 GHz Generic use and for Radiodetermination: radar, detection, movement and alert applications NOTE: (a) and (b) refer to two different operational restrictions for different power levels in the same frequency band. NOTE 1: It should be noted that table 1 rep
15、resents the most widely implemented position within the European Union i.6, i.7 and i.8 and the CEPT countries i.3, but it should not be assumed that all designated bands are available in all countries. NOTE 2: In addition, it should be noted that other frequency bands may be available in a country
16、within the frequency range 1 GHz to 40 GHz covered by the present document. See the European Commission Decisions on Short Range Devices i.6, i.7, i.8 and the CEPT ERC Recommendation 70-03 i.3 as implemented through National Radio Interfaces (NRI) and additional NRI as relevant. ETSI ETSI EN 300 440
17、-2 V1.4.1 (2010-08) 7NOTE 3: On non-harmonized parameters, national administrations may impose certain conditions such as the type of modulation, frequency, channel/frequency separations, maximum transmitter radiated power, duty cycle, and the inclusion of an automatic transmitter shut-off facility,
18、 as a condition for the issuing of an Individual Rights for use of spectrum or General Authorization, or as a condition for use “under licence exemption“, as it is in most cases for Short Range Devices. The present document covers fixed stations, mobile stations and portable stations. Applications u
19、sing Ultra Wide Band (UWB) technology are not covered by the present document. The present document does not require measurements for radiated emissions below 25 MHz. The present document is intended to cover the provisions of article 3.2 of Directive 1999/5/EC i.2 (R Short range devices; Radio equi
20、pment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area.
21、 i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. i.2 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment
22、 and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of candidate Harmonized Standards for application under the R Uncertainties in the measurement of mobile radio equipment characteristics“. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 8i
23、.6 European Commission Decision 2006/771/EC of 9 November 2006 on harmonization of the radio spectrum for use by short-range devices. i.7 European Commission Decision 2008/432/EC of 23 May 2008 (amending Decision 2006/771/EC) on harmonization of the radio spectrum for use by short-range devices. i.8
24、 European Commission Decision 2009/381/EC of 13 May 2009 (amending Decision 2006/771/EC) on harmonization of the radio spectrum for use by short-range devices. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in the R
25、the value of the measurement uncertainty for the measurement of each parameter shall be included in the test report; the recorded value of the measurement uncertainty shall be, for each measurement, equal to or lower than the values in clause 10, table 10 of EN 300 440-1 1. For the test methods, acc
26、ording to the present document, the measurement uncertainty figures shall be calculated in accordance with the principles contained within TR 100 028 i.5 and shall correspond to an expansion factor (coverage factor) k = 1,96 or k = 2 (which provide confidence levels of respectively 95 % and 95,45 %
27、in the case where the distributions characterizing the actual measurement uncertainties are normal (Gaussian). The particular expansion factor used for the evaluation of the measurement uncertainty shall be stated. 5.3 Essential transmitter test suites 5.3.1 Equivalent isotropically radiated power E
28、ither: the test specified in EN 300 440-1 1, clauses 7.1.2 and 7.1.2.1 shall be carried out; or the test specified in EN 300 440-1 1, clauses 7.1.2 and 7.1.2.2 shall be carried out. This test suite applies to transmitters with an integral or dedicated antenna. 5.3.2 Permitted range of operation freq
29、uencies Either: the test specified in EN 300 440-1 1, clause 7.2.2 shall be carried out; or the test specified in EN 300 440-1 1, clause 7.2.3 as appropriate shall be carried out. This test suite applies to all transmitters. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 125.3.3 Unwanted emissions in the s
30、purious domain Either: the tests specified in EN 300 440-1 1, clause 7.3.2 and EN 300 440-1 1, clause 7.3.3 shall be carried out; or the test specified in EN 300 440-1 1, clause 7.3.4 shall be carried out. This test suite applies to all transmitters. 5.4 Essential receiver test suites 5.4.1 Adjacent
31、 channel selectivity the test specified in EN 300 440-1 1, clause 8.1.2 shall be carried out. This test suite applies to Category 1 and Category 2 receivers when invoked, as defined in EN 300 440-1 1, clause 4.1.1. 5.4.2 Blocking or desensitization the test specified in EN 300 440-1 1, clause 8.2.2
32、shall be carried out. This test suite applies to Category 1 and Category 2 receivers when invoked, as defined in EN 300 440-1 1, clause 4.1.1. 5.4.3 Spurious radiations Either: the test specified in EN 300 440-1 1, clause 8.3.2 and EN 300 440-1 1, clause 8.3.3 shall be carried out; or the test speci
33、fied in EN 300 440-1 1, clause 8.3.4 shall be carried out. This test suite applies to all receivers. 5.5 Tests for RFID systems at 2,45 GHz the test specified in clauses 5.3.1 and 5.3.2 shall be carried out. the test specified in EN 300 440-1 1, clause 7.2 shall be carried out. 5.6 Tests for GBSAR s
34、ystems 5.6.1 Effective radiated power The test specified in EN 300 440-1 1, clause E.2.2, shall be carried out. 5.6.2 Permitted range of operating frequencies The test specified in EN 300 440-1 1, clause E.3.2, shall be carried out. 5.6.3 DAA threshold The test specified in EN 300 440-1 1, clause E.
35、4.3.2, shall be carried out. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 135.6.4 DAA timing parameters 5.6.4.1 Minimum listen time The test specified in EN 300 440-1 1, clause E.4.4.1.2 shall be carried out. 5.6.4.2 Minimum listen time after detection The test specified in EN 300 440-1 1, clause E.4.4.2
36、.2 shall be carried out. 5.6.4.3 Maximum transmitter on-time The test specified in EN 300 440-1 1, clause E.4.4.3.2 shall be carried out. 5.6.4.4 Minimum transmitter off-time The test specified in EN 300 440-1 1, clause E.4.4.4.2 shall be carried out. 5.6.5 Antenna pattern The test specified in EN 3
37、00 440-1 1, clause E.5.2 shall be carried out. 5.6.6 Unwanted emissions in the spurious domain The test specified in EN 300 440-1 1, clauses 7.3.2 and 7.3.3. Or the test specified in EN 300 440-1 1, clause 7.3.4. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 14Annex A (normative): HS Requirements and conf
38、ormance Test specifications Table (HS-RTT) The HS Requirements and conformance Test specifications Table (HS-RTT) in table A.1 serves a number of purposes, as follows: it provides a statement of all the requirements in words and by cross reference to (a) specific clause(s) in the present document or
39、 to (a) specific clause(s) in (a) specific referenced document(s); it provides a statement of all the test procedures corresponding to those requirements by cross reference to (a) specific clause(s) in the present document or to (a) specific clause(s) in (a) specific referenced document(s); it quali
40、fies each requirement to be either: - Unconditional: meaning that the requirement applies in all circumstances; or - Conditional: meaning that the requirement is dependent on the manufacturer having chosen to support optional functionality defined within the schedule; in the case of Conditional requ
41、irements, it associates the requirement with the particular optional service or functionality; it qualifies each test procedure to be either: - Essential: meaning that it is included with the Essential Radio Test Suite and therefore the requirement shall be demonstrated to be met in accordance with
42、the referenced procedures; - Other: meaning that the test procedure is illustrative but other means of demonstrating compliance with the requirement are permitted. Table A.1: HS Requirements and conformance Test specifications Table (HS-RTT) Harmonized Standard EN 300 440-2 The following requirement
43、s and test specifications are relevant to the presumption of conformity under article 3.2 of the R those designated “O“ make up the Other Test Suite; for those designated “X“ there is no test specified corresponding to the requirement. The completion of all tests classified “E“ as specified with sat
44、isfactory outcomes is a necessary condition for a presumption of conformity. Compliance with requirements associated with tests classified “O“ or “X“ is a necessary condition for presumption of conformity, although conformance with the requirement may be claimed by an equivalent test or by manufactu
45、rers assertion supported by appropriate entries in the technical construction file. Clause Number Identification of clause(s) defining the test specification in the present document unless another document is referenced explicitly Where no test is specified (that is, where the previous field “s“X“)
46、this field remains blank. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 16Annex B (informative): The EN title in the official languages The enlargement of the European Union (EU) resulted in a requirement from the EU for a larger number of languages for the translation of the titles of Harmonized Standard
47、s and mandated ENs that are to be listed in the Official Journal to support the implementation of this legislation. For this reason the title translation concerning the present document can be consulted via the e-approval application. ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 17Annex C (informative):
48、Bibliography Council Directive 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility (EMC Directive). Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member States relating to electrical equipment
49、designed for use within certain voltage limits (LV Directive). ETSI ETSI EN 300 440-2 V1.4.1 (2010-08) 18History Document history V1.1.1 September 2001 Publication V1.1.2 July 2004 Publication V1.2.1 May 2008 Publication V1.3.1 March 2009 Publication V1.4.1 April 2010 One-step Approval Procedure OAP 20100817: 2010-04-19 to 2010-08-17 V1.4.1 August 2010 Publication
