1、ETSI EN 301 823-2-1 1.1.1 (2001-01) European Standard (Telecommunications series) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 2: Radio Link Control (RLC) sublayer; Sub-part 1 : Protocol Implementation Conformance Stateme
2、nt (PICS) proforma 2 ETSI EN 301 823-2-1 V1.l.l (2001-01) Tt- Reference D EN/B RAN-002T004-2- 1 Keywords access, HIPERLAN, PICS ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but no
3、n lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: present document may be made available in more than one electronic version or in print. In any case of existing perceived difference in contents betwee
4、n such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be s
5、ubject to revision or change of status. Information on the current status of this and other ETSI documents is available at :/.$./$/ If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as authorized by written permis
6、sion. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI EN 301 823-2-1 V1.l.l (2001-01) Contents Intellectual Property Rights 5 Foreword 5 Introduction 5 1 Scope 6 2 References 6 3
7、 Definitions and abbreviations 6 3.1 Definitions 6 3.2 Abbreviations 7 4 Conformance to this PICS proforma specification . 7 Protocol ICs proforma for TS 101 761-2 V1.l.l . 8 Guidance for completing the PICS proforma . 8 Annex A (normative): A . 1 A.l.l Purposes and structure . 8 A.1.2 Abbreviations
8、 and conventions 8 A.1.3 Instructions for completing the PICS proforma 10 A.2 Identification of the implementation 10 A.2.1 Date of the statement . 11 A.2.2 Implementation Under Test (IUT) identification 11 A.2.3 System Under Test (SUT) identification 11 A.2.4 Product supplier 11 A.2.5 Client (if di
9、fferent from product supplier) 12 A.2.6 PICS contact person 12 A.3 Identification of the EN . 13 A.4 Global statement of conformance 13 AS Roles 13 A.6 Mobile Terminal MT 13 A.6.1 Major MT capabilities and functionalities of RLC 13 A.6.1.1 Services supporting ACF: Association Control Function . 14 A
10、.6.1.1.1 Association functions 14 A.6.1.1.2 Security functions . 14 A.6.1.1.3 Disassociation functions . 16 A.6.1.1.4 Multicast functions . 16 A.6.1.1.5 CL Broadcast functions . 16 A.6.1.2 Services supporting RRC: Radio Resource Control . 17 A.6.1.3 A.6.2 A.6.2.1 A.6.2.2 A.6.2.3 A.6.2.4 Services sup
11、porting DUC: DLC User Connection Control 17 RLC PDU descriptions, seen from MT . 19 PDU descriptions for ACF support . 19 PDU descriptions for unsupported messages . 25 A.6.3 PDU parameters 25 Major AP capabilities and functionalities of RLC . 25 Services supporting ACF: Association Control Function
12、 . 26 A.7.1.1.2 Security functions . 26 PDU descriptions for RRC support . 21 PDU descriptions for DUC support 23 A.7 A.7.1 A.7.1.1 A.7.1.1.1 Association functions 26 A.7.1.1.3 Disassociation functions . 28 A.7.1.1.4 Multicast functions . 28 A.7.1.1.5 CL Broadcast functions . 28 Access Point AP . 25
13、 ETSI 4 ETSI EN 301 823-2-1 V1.l.l (2001-01) A.7.1.2 A.7.1.3 A.7.2 A.7.2.1 A.7.2.2 A.7.2.3 A.7.2.4 A.7.3 Services supporting RRC: Radio Resource Control . 29 Services supporting DUC: DLC User Connection Control 29 RLL PDU descriptions. seen from AP . 31 PDU descriptions for ACF support . 31 PDU desc
14、riptions for RRC support . 33 PDU descriptions for DUC support 35 PDU descriptions for unsupported messages . 37 PDU parameters 37 A.8.1 A.8.1.1 A.8.1.2 A.8.1.3 A.8.1.4 A.8.1.5 A.8.1.6 A.8.2 A.8.2.1 A.8.2.2 A.8.2.3 A.8.2.4 A.8.2.5 A.8.2.6 A.8.2.7 A.8.3 A.8.3.1 A.8.3.2 A.8.3.3 A.8.3.4 A.8.3.5 A.8.3.6
15、 A.8.3.7 A.8.4 A.8 PDU parameters 37 Parameters of PDUs for ACF support 37 Association 37 Security . 40 Authentication . 42 Disassociation 44 Parameters of PDUs for RRC support 46 Dynamic Frequency Selection (DFS) 50 Multicast 44 Broadcast . 45 Handover . 46 Change fi-equency 53 Uplink power control
16、 . 53 MT alive 53 MT absence . 54 Power saving . 54 Parameters of PDUs for DUC support 55 DUC setup . 55 DUC release 56 DUC modify 56 Direct Mode DUC setup . 57 Direct Mode DUC release 59 DUC relay release 59 Direct Mode DUC modify 60 Parameters of PDUs for non support 62 History . 63 ETSI 5 ETSI EN
17、 301 823-2-1 V1.l.l (2001-01) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR O
18、00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server ClattD:/www.etsP.c/iDr. Pursuant to the ETSI IPR Policy, no invest
19、igation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard
20、 (Telecommunications series) has been produced by ETSI Project Broadband Radio Access Networks (BRAN). The present document is sub-part 1 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 2: R
21、adio Link Control (RLC) sublayer, as identified below: Sub-part 1: Sub-part 2: Sub-part 3: “Protocol Implementation Conformance Statement (PICS) proforma“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) specification“. National transposition dates Date of adoption of this EN
22、 Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 19 January 2001 30 April 2001 31 October 2001 31 October 2001 Introduction To evaluate conformance of a
23、 particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is called a Protocol Implementation Conformance Statement (PICS). ETSI 6 ETSI EN 301 823-2-1 V1.l.l (2001-01) 1 Scope The pr
24、esent document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Radio Link Control (RLC) layer of Hiperlan type 2 as defined in TS 101 761-2 i in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ET
25、S 300 406 2. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present documen t. Referen
26、ces are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to
27、 later versions published as an EN with the same number. 111 ETSI TS 101 761-2 (Vl.l.1): “Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 2: Radio Link Control (RLC) sublayer“. ETSI ETS 300 406 (1995): “Methods for Testing and Specification (MTS); Protoco
28、l and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection -
29、 Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 121 131 141 3 3.1 Definitions and abbreviations Def i n it ions For the purposes of the present document, the following terms and definitions apply: - - terms defined in TS 101 761-2 i; terms defined in
30、ISO/IEC 9646-1 3 and in ISO/IEC 9646-7 4. In particular, the following terms defined in ISO/IEC 9646-1 3 apply: Implementation Conformance Statement (ICs): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been
31、implemented. The ICs can take several forms: protocol ICs, profile ICs, profile specific ICs, information object ICs, etc. ICs proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICs. Protocol ICs (PICS): ICs for an implementation or sy
32、stem claimed to conform to a given protocol specification. ETSI 7 ETSI EN 301 823-2-1 V1.l.l (2001-01) 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACF AP BCH cc CL DCC DES DFS DLC DM DUC EC ICs IUT IV MAC MT PDU PICS RLC RRC SCS SUT Association Cont
33、rol Function Access Point Broadcast CHannel Central Controller Convergence Layer DLC user Connection Control Data Encryption Standard Dynamic Frequency Selection Data Link Control Direct Mode DLC User Connection Error Control Implementation Conformance Statement Implementation Under Test Initializat
34、ion Vector Medium Access Control Mobile Terminal Protocol Data Unit Protocol ICs Radio Link Control Radio Resource Control System Conformance Statement System Under Test 4 Conformance to this PICS proforma specification If it claims to conform to the present document, the actual PICS proforma to be
35、filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in Annex A, and shall preserve the numberinghaming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the gui
36、dance for completion given in clause A. 1. ETSI 8 ETSI EN 301 823-2-1 V1.l.l (2001-01) Annex A (normative): Protocol ICs proforma for TS 1 O1 761 -2 VI .I .I Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present docu
37、ment may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the completed PICS. A.l Guidance for completing the PICS proforma A.1 .I Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a sup
38、plier of an implementation of the requirements defined in TS 101 761-2 i may provide information about the implementation in a standardized manner. The PICS proforma is subdivided into subclauses for the following categories of information: - - identification of the implementation; - - global statem
39、ent of conformance; - roles; - Mobile Terminal MT, - major capabilities, guidance for completing the PICS proforma; identification of the TS 101 761-2 i; - PDUS, - PDU parameters, - timers. - Access Point AP; - major capabilities, - PDUS, - PDU parameters, - timers. A. 1.2 Abbreviations and conventi
40、ons The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. ETSI 9 ETSI EN 301 823-2-1 V1.l.l (2001-01) Item descriptio
41、n column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m O n/a X 0.i mandatory - t
42、he capability is required to be supported. optional - the capability may be supported or not. not applicable - in the given context, it is impossible to use the capability. prohibited (excluded) - there is a requirement not to use this capability in the given context. qualified optional - for mutual
43、ly exclusive or selectable options from a set. “i“ is an integer which identifies an unique group of related optional items and the logic of their selection which is defined immediately following the table. ci 1 conditional - the requirement on the capability (“m“, “o“, “x“ or “n/a“) depends on the
44、support of other optional or conditional items. “i“ is an integer identifying an unique conditional status expression which is defined immediately following the table. irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is requested from the supplier. N
45、OTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. Reference column The reference column makes reference to TS 101 761-2 i, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the im
46、plementation. The following common notations, defined in ISOAEC 9646-7 4, are used for the support column: Y or y N or n N/A, n/a or - supported by the implementation. not supported by the implementation. no answer required (allowed only if the status is n/a, directly or after evaluation of a condit
47、ional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier shall enter the unique reference to a condition
48、al expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if and only if that profile is to be used. EXAMPLE 1:
49、 ?3: IF prof1 THEN Y ELSE N NOTE 2: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non- conformant. Support for a parameter on a PDU means that the semantics of that parameter are supported. Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 ETSI 10 ETSI
