1、 ETSI TR 119 164-1 V1.1.1 (2016-06) Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 1: Overview TECHNICAL REPORT ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)2 Reference DTR/ESI-0019164-1 Keywords ASiC, conformance, e
2、-commerce, electronic signature, profile, security, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impo
3、rtant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written
4、 authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document s
5、hould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the
6、following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the
7、PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETS
8、I registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)3 Contents I
9、ntellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Testing Conformance and Interoperability . 6
10、g34.1 Part 2: Test suites for testing interoperability of ASiC baseline containers . 6g34.2 Part 3: Test suites for testing interoperability of additional ASiC containers 7g34.3 Part 4: Testing Conformance for ASiC baseline containers . 7g34.4 Part 5: Testing Conformance for additional ASiC containe
11、rs 7g3Annex A (informative): Bibliography . 8g3History 9g3ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly avai
12、lable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web serv
13、er (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may becom
14、e, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Electronic Signatures and Infrastructures (ESI). The present document is part 1 of a multi-part deliverable covering ASiC containers - Testing Conformance and Interoperability, as
15、identified below: ETSI TR 119 164-1: “Overview“; ETSI TS 119 164-2: “Test suites for testing interoperability of ASiC baseline containers“; ETSI TS 119 164-3: “Test suites for testing interoperability of ASiC containers other than baseline“; ETSI TS 119 164-4: “Testing Conformance of ASiC baseline c
16、ontainers“; ETSI TS 119 164-5: “Testing Conformance of additional ASiC containers. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal for
17、ms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The multi-part deliverable defines test suites for testing interoperability and conformance of ASiC containers. The set of Technical Specifications consi
18、sts of four documents. The test suites for testing interoperability of ASiC baseline containers (Part 2) and the specification required for building software tools for testing technical conformity of ASiC baseline containers (Part 4) are defined against ETSI EN 319 162-1 i.1. The test suites for tes
19、ting interoperability of additional ASiC containers (Part 3) and the specification required for building software tools for testing technical conformity of additional ASiC containers (Part 5) are defined against ETSI EN 319 162-2 i.2. The test suites for testing interoperability of ASiC containers o
20、ther than baseline (Part 3) and the specifications required for building software tools for testing technical conformity of ASiC containers other than baseline (Part 5) are defined against: containers based on the building blocks specified in ETSI EN 319 162-1 i.1, clause 4.3 for ASiC-S containers a
21、nd clause 4.4 for ASiC-E containers; and additional containers as spedified in ETSI EN 319 162-2 i.2. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)5 1 Scope The present document provides an overview of the set of test suites for testing interoperability and conformance of ASiC containers. The present docu
22、ment: a) provides a general description of the set of test suites for testing interoperability and conformance of ASiC containers; and b) lists the features of every test suite for testing interoperability and conformance of ASiC containers. The present document is for information only. Normative re
23、quirements of each test suite are in other parts of this multi-part deliverable. 2 References 2.1 Normative references As informative publications shall not contain normative references this clause shall remain empty. 2.2 Informative references References are either specific (identified by date of p
24、ublication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid a
25、t the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 ETSI EN 319 162-1: “Electronic Signatures and Infrastruct
26、ures (ESI); Associated Signature Containers (ASiC); Part 1: Building blocks and ASiC baseline containers“. i.2 ETSI EN 319 162-2: “Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC); Part 2: Additional ASiC containers“. i.3 ETSI TR 119 001: “Electronic Signatures
27、 and Infrastructures (ESI); The framework for standardization of signatures; Definitions and abbreviations“. i.4 ETSI EN 319 102-1: “Electronic Signatures and Infrastructures (ESI); Procedures for Creation and Validation of AdES Digital Signatures; Part 1: Creation and Validation“. i.5 ETSI EN 319 1
28、22-2: “Electronic Signatures and Infrastructures (ESI); CAdES digital signatures; Part 2: Extended CAdES signatures“. i.6 ETSI EN 319 132-2: “Electronic Signatures and Infrastructures (ESI); XAdES digital signatures; Part 2: Extended XAdES signatures“. i.7 ETSI TS 119 124-3: “Electronic Signatures a
29、nd Infrastructures (ESI); CAdES digital signatures - Testing Conformance and Interoperability; Part 3: Test suites for testing interoperability of extended CAdES signatures“. i.8 ETSI TS 119 134-3: “Electronic Signatures and Infrastructures (ESI); XAdES digital signatures - Testing Conformance and I
30、nteroperability; Part 3: Test suites for testing interoperability of extended XAdES signatures“. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)6 i.9 ETSI TS 119 164-2: “Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 2
31、: Test suites for testing interoperability of ASiC baseline containers“. i.10 ETSI TS 119 164-3: “Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 3: Test suites for testing interoperability of ASiC containers ot
32、her than baseline“. i.11 ETSI TS 119 164-4: “Electronic Signatures and Infrastructures (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 4: Testing conformance of ASiC baseline containers“. i.12 ETSI TS 119 164-5: “Electronic Signatures and Infrastructure
33、s (ESI); Associated Signature Containers (ASiC) - Testing Conformance and Interoperability; Part 5: Testing conformance of additional ASiC containers“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TR 119 001 i.3 app
34、ly. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TR 119 001 i.3 apply. 4 Testing Conformance and Interoperability 4.1 Part 2: Test suites for testing interoperability of ASiC baseline containers ETSI TS 119 164-2 i.9 specifies the test suites for testin
35、g interoperability of ASiC baseline containers against ETSI EN 319 162-1 i.1. ETSI EN 319 162-1 i.1 defines four different levels of ASiC baseline containers. The test suites are defined with different layers reflecting the levels of ASiC baseline containers specified in i.1: Testing ASiC containers
36、 interoperability between applications claiming B-B level conformance. Testing ASiC containers interoperability between applications claiming B-T level conformance. Testing ASiC containers interoperability between applications claiming B-LT level conformance. Testing ASiC containers interoperability
37、 between applications claiming B-LTA level conformance. Testing augmentation of ASiC containers from B-T level to B-LTA level. Testing ASiC baseline containers where the validation of the container signature(s) according to ETSI EN 319 102-1 i.4 would not result in TOTAL_PASSED: - ASiC B-B level con
38、tainers test cases; - ASiC B-T level containers test cases; - ASiC B-LTA level containers test cases. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)7 4.2 Part 3: Test suites for testing interoperability of additional ASiC containers ETSI TS 119 164-3 i.10 specifies the test suites for testing interoperabil
39、ity of additional ASiC containers against ETSI EN 319 162-2 i.2. ETSI EN 319 162-2 i.2 defines additional containers including time assertions and signature(s) as defined in ETSI EN 319 122-2 i.5 and ETSI EN 319 132-2 i.6. The test suites for containers including signatures are defined according to
40、ETSI TS 119 124-3 i.7 for signature(s) as defined in ETSI EN 319 122-2 i.5 and according to ETSI TS 119 134-3 i.8 for signature(s) as defined in ETSI EN 319 132-2 i.6. 4.3 Part 4: Testing Conformance for ASiC baseline containers ETSI TS 119 164-4 i.11 defines the requirements for building software t
41、ools for testing technical conformance of ASiC baseline containers against ETSI EN 319 162-1 i.1. ETSI EN 319 162-1 i.1 defines requirements for building blocks and ASiC baseline containers. For the purpose of identifying the whole set of test assertions required for testing conformance against ASiC
42、 baseline containers as specified in ETSI EN 319 162-1 i.1, ETSI TS 119 164-4 i.11 classifies the whole set of requirements specified in ETSI EN 319 162-1 i.1 in two groups as follows: 1) requirements specific to ASiC baseline containers; 2) requirements common to both ASiC baseline containers as sp
43、ecified in ETSI EN 319 162-1 i.1 and additional ASiC containers as specified in ETSI EN 319 162-2 i.2. 4.4 Part 5: Testing Conformance for additional ASiC containers ETSI TS 119 164-5 i.12 defines the requirements for building software tools for testing technical conformance of additional ASiC conta
44、iners against ETSI EN 319 162-2 i.2. ETSI EN 319 162-1 i.1 defines requirements for building blocks and ASiC baseline containers. For the purpose of identifying the whole set of test assertions required for testing conformance against additional ASiC containers as specified in ETSI EN 319 162-2 i.2,
45、 ETSI TS 119 164-5 i.12 classifies the whole set of requirements specified in ETSI EN 319 162-1 i.1 and in ETSI EN 319 162-2 i.2 in two groups as follows: 1) requirements common to both ASiC baseline containers as specified in ETSI EN 319 162-1 i.1 and additional ASiC containers as specified in ETSI
46、 EN 319 162-2 i.2; 2) requirements specific to Additional ASiC containers as specified in ETSI EN 319 162-2 i.2. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)8 Annex A (informative): Bibliography ETSI TS 119 122-3: “Electronic Signatures and Infrastructures (ESI); CAdES digital signatures - Testing Confor
47、mance and Interoperability; Part 3: Test suites for testing Interoperability of extended CAdES signatures“. ETSI TS 119 132-3: “Electronic Signatures and Infrastructures (ESI); XAdES digital signatures - Testing Conformance and Interoperability; Part 3: Test suites for testing Interoperability of extended XAdES signatures“. ETSI ETSI TR 119 164-1 V1.1.1 (2016-06)9 History Document history V1.1.1 June 2016 Publication
