1、 ETSI TR 136 905 V14.2.0 (2017-04) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Derivation of test points for radio transmission and reception conformance test cases (3GPP TR 36.905 version 14.2.0 Release 14) floppy3TECHNI
2、CAL REPORT ETSI ETSI TR 136 905 V14.2.0 (2017-04)13GPP TR 36.905 version 14.2.0 Release 14Reference RTR/TSGR-0536905ve20 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b
3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versio
4、ns of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a speci
5、fic network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you fi
6、nd errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfi
7、lm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights res
8、erved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members GSM
9、 and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 136 905 V14.2.0 (2017-04)23GPP TR 36.905 version 14.2.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information p
10、ertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Sec
11、retariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates
12、 on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities,
13、 UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “sho
14、uld“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. E
15、TSI ETSI TR 136 905 V14.2.0 (2017-04)33GPP TR 36.905 version 14.2.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abbreviations . 5g33.1 Definitions 5g33.2 Symbols 5g33.3 Abbreviations .
16、 5g34 Test coverage analysis 6g34.1 Test point selection in Additional Maximum Power Reduction (A-MPR) test cases. 6g34.1.1 A-MPR test case for single carrier 6g34.1.2 A-MPR test case for intra-band contiguous UL CA . 7g34.1.3 A-MPR test case for inter-band UL CA 7g34.2 Test frequency and bandwidth
17、selection in Reference sensitivity test cases 9g34.2.1 Reference sensitivity level for single carrier . 9g34.2.2 Reference sensitivity level for intra-band contiguous CA 9g34.2.3 Reference sensitivity level for inter-band CA . 9g34.2.4 Reference sensitivity level for intra-band non-contiguous CA . 1
18、0g34.2.5 Reference sensitivity level for 3DL CA 10g34.2.5.2 Inter-band 10g34.2.5.3 Intra-band contiguous + Inter-band . 11g34.2.5.4 Intra-band non-contiguous + Inter-band 12g34.2.5.5 Intra-band non-contiguous + Intra-band contiguous . 12g34.2.6 Reference sensitivity level for 4DL CA 12g34.2.6.1 Intr
19、a-band contiguous 12g34.2.6.2 Inter-band 12g34.2.6.3 Intra-band contiguous + Inter-band . 13g34.2.6.4 Intra-band non-contiguous + Inter-band 13g34.2.6.5 Intra-band non-contiguous + Intra-band contiguous . 14g34.2.6.6 Intra-band non-contiguous + Intra-band non-contiguous 14g34.3 Test points selection
20、 and Frequency ranges to cover in Tx spurious emissions test cases for UL CA. 14g34.4 Test points selection in 3DL Receiver test cases to align with 2DL test cases and skipping of 2DL fallback . 15g3Annex A: Derivation documents 16g3Annex B: Change history . 17g3History 20g3ETSI ETSI TR 136 905 V14.
21、2.0 (2017-04)43GPP TR 36.905 version 14.2.0 Release 14Foreword This Technical Report has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modi
22、fy the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG
23、approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 136 905 V14.2.0 (2017-04)5
24、3GPP TR 36.905 version 14.2.0 Release 141 Scope The present document specifies and contains the derivation of Test Points for RF test cases, thereby 3GPP TSG RAN WG5 will have a way of storing the input contributions provided. The test cases are described in TS36.521-12. The test cases which have be
25、en analysed to determine Test Points are included as .zip files. The present document is applicable from Release 10 up to the release indicated on the front page of the present Terminal conformance specifications. 2 References The following documents contain provisions which, through reference in th
26、is text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applie
27、s. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.521-1: “User Equipment (UE)
28、 conformance specification, Radio transmission and reception Part 1: conformance testing“. 3 3GPP TS 36.101: “E-UTRA UE radio transmission and reception“. 4 3GPP TS 36.521-2: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and r
29、eception; Part 2: Implementation Conformance Statement (ICS)“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 apply. A term defined in the present document takes precedence over the definition of the s
30、ame term, if any, in TR 21.905 1. Other definitions used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. 3.2 Symbols Symbols used in the present document are listed in 3GPP TR 21.905 1, 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3. 3.3 Abbreviations For the purposes of the pr
31、esent document, the abbreviations given in TR 21.905 1 apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. Other abbreviations used in the present document are listed in 3GPP TS 36.521-1 2 or 3GPP TS 36.101 3.
32、ETSI ETSI TR 136 905 V14.2.0 (2017-04)63GPP TR 36.905 version 14.2.0 Release 144 Test coverage analysis 4.1 Test point selection in Additional Maximum Power Reduction (A-MPR) test cases When deriving test points for these test cases the calculation of maximum output power backoff and determination o
33、f possible worst cases for out-of-band emissions are non-trivial and therefore require an analysis which is documented here. 4.1.1 A-MPR test case for single carrier This section contains information on test point selection for test case 6.2.4 in 2, Additional Maximum Power Reduction (A-MPR). Test p
34、oints in this test were added in the past, and no selection information is therefore available prior the NS values in table 4.1.1-1. Selection of test points should include some possible worst combinations based on the A-MPR characteristics specified for each NS value and these shall be selected so
35、that they match with corresponding spectrum emission requirements test points. The number of test points should be realistic. Table 4.1.1-1: NS value specific test points for A-MPR NS value Justification Comments NS_05 See attachment “TpAnalysisAMPR(NS_05)_6.2.4_v2.zip” Added at RAN5#73 NS_24 See at
36、tachment “TpAnalysisAMPR_6.2.4(NS_24 and NS_25).zip” Added at RAN5#72 NS_25 See attachment “TpAnalysisAMPR_6.2.4(NS_24 and NS_25).zip” Added at RAN5#72 NS_04 (Power Class 2) See attachment “TpAnalysisAMPR_6.2.4_1(NS_04_PC2).zip” Added at RAN5#74The analyses for UE category M1 are performed per NS-va
37、lue in table 4.1.1-2. The general principles for selection of test points are: - For Additional spurious emissions, requirements are the same for all bandwidths. Since channel bandwidth is not judged to have any impact on the UE transmit signal for category M1, only one bandwidth needs to be tested.
38、 The lowest bandwidth with emissions requirement has lowest guard band and is therefore the most stringent. - For NS-values with Additional SEM requirement and without any allowed A-MPR, same test points as in SEM test case 6.6.2.1EA can be used. - For NS-values with Additional Spurious requirement
39、and without any allowed A-MPR, same test points as in spurious test case 6.6.3EA.1 can be used - For Additional SEM, test frequency is selected as in SEM test case. - For Additional spurious emissions, test frequency selection depends on if protected range is above or below the UE transmit signal in
40、 frequency. If protected range is in higher frequency High frequency is selected, if lower frequency Low range is selected. ETSI ETSI TR 136 905 V14.2.0 (2017-04)73GPP TR 36.905 version 14.2.0 Release 14Table 4.1.1-2: NS value specific test points for A-MPR UE category M1 NS value Operating band App
41、licable test case RB allocation and modulation Bandwidth Test frequency Comments NS_03 2, 4 6.6.2.2EA SEM (Note 1) Lowest, 5MHz, 10MHz, Highest Low, Mid, High NS_04 41 6.6.2.2EA TBD NS_05 1 6.6.3EA.3 Spur (Note 2) 5 MHz Low NS_06 12, 13 6.6.2.2EA SEM (Note 1) Lowest, 5MHz, 10MHz, Highest Low, Mid, H
42、igh NS_07 13 6.6.2.2EA See attachment “TpAnalysisAMPR(NS_07)_6.2.4EA.zip” 10MHz Low, Mid, High Testing only 10 MHz to align withlegacy LTE test case 6.6.3EA.3 10 MHz Low Emission requirements areonly defined for 1MHz channel bandwidth NS_08 19 6.6.3EA.3 Spur (Note 2) 5 MHz High NS_09 21 6.6.3EA.3 Sp
43、ur (Note 2) 5 MHz High NS_10 20 N/A Not tested due tomissing requirements NS_12 26 6.6.3EA.3 TBD NS_13 26 6.6.3EA.3 Spur (Note 2) 1.4 MHz Low (Note 3) NS_14 26 6.6.3EA.3 Spur (Note 2) 10 MHz Low (Note 3) NS_15 26 6.6.3EA.3 See attachment “TpAnalysisAMPR(NS_15)_6.2.4EA.zip” 1.4 MHz High, High 4 MHz N
44、S_16 27 6.6.3EA.3 Spur (Note 2) 1.4 MHz Low NS_17 28 6.6.3EA.3 Spur (Note 2) 5 MHz Low (Note 3) NS_18 28 6.6.3EA.3 Spur (Note 2) 5 MHz Low Note 1: No A-MPR allowed, same test points as SEM test case 6.6.2.1EA can be used for Additional SEM Note 2: No A-MPR allowed, same test points as Spurious test
45、case 6.6.3EA.1 can be used for Additional Spurious Note 3: Protected range below UE transmit signal, and restricted carrier frequency. Use lowest allowed frequency 4.1.2 A-MPR test case for intra-band contiguous UL CA This section contains information on test point selection for test case 6.2.4A.1 i
46、n 2, Additional Maximum Power Reduction (A-MPR) for CA (intra-band contiguous DL CA and UL CA). The analyses are performed per NS-value and are stored as zip-files as defined in annex A. 4.1.3 A-MPR test case for inter-band UL CA This section contains information on test point selection for test cas
47、e 6.2.4A.2 in 2, Additional Maximum Power Reduction (A-MPR) for CA (inter-band DL CA and UL CA). TS 36.101 3 specifies band dependent NS-values, which in the inter-band UL CA test cases become a combination of two NS-values. Testing all possible combinations would lead to too excessive testing and t
48、he combinations that are realistic should therefore be prioritized. This selection is documented in table 4.1.3-1. ETSI ETSI TR 136 905 V14.2.0 (2017-04)83GPP TR 36.905 version 14.2.0 Release 14Table 4.1.3-1: A-MPR test coverage per CA configuration for inter-band CA with 2 CC CA config with UL CA s
49、upport (Note 1) NS values in same order as Uplink CA Configuration column Applicable test case Comment/Justification CA_1A-3A NS_05 NS_01 6.6.3.3A.2 Note 3 CA_1A-5A NS_05 NS_01 6.6.3.3A.2 Note 3CA_1A-7A NS_05 NS_01 6.6.3.3A.2 Note 3 CA_1A-8A NS_05 NS_01 6.6.3.3A.2 Note 3CA_1A-18A NS_05 NS_01 6.6.3.3A.2 Note 3 CA_1A-19A NS_05 NS_08 6.6.3.3A.2 Note 3CA_1A-21A NS_05 NS_09 6.6.3.3A.2 Note 3 CA_1A-26A NS_05 NS_01 6.6.3.3A.2 Note 3CA_1A-28A NS_05 NS_17 6.6.3.3A.2 Note 3 CA_1A-42A NS_05 NS_01 6.6.3.3A.2 Note 3CA_2A-4A NS_03 NS_03 6.6.2.2A.
