1、 ETSI TS 102 253 V1.1.1 (2003-08)Technical Specification Private Integrated Services Network (PISN);Use of QSIG for Message Centre Access (MCA)Profile StandardETSI ETSI TS 102 253 V1.1.1 (2003-08) 2 Reference DTS/ECMA-00223 Keywords PISN, profile ETSI 650 Route des Lucioles F-06921 Sophia Antipolis
2、Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present doc
3、ument may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the
4、 PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/st
5、atus.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standard
6、s Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the be
7、nefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 253 V1.1.1 (2003-08) 3 Contents Intellectual Property Rights7 Foreword.7 Brief History.7 1 Scope 8 2 Conformance 8 3 References (normative) 8 4 Definitions10 4.1 External definitions 10 4.2 Served user .11 4.3 Served user
8、 PINX.11 4.4 Message Centre (MC) 11 4.4.1 MCM Message Centre (MC) 11 4.4.2 MWI Message Centre (MC) .11 4.5 MCA-Profile-1 .12 4.6 MCA-Profile-2 .12 4.7 MCA-Profile-3 .12 4.8 MCA-Profile-4 .12 4.9 Message Deposit 12 4.9.1 Direct Message Deposit 12 4.9.2 Message Deposit after Diversion12 4.9.3 Message
9、Deposit after Transfer 12 4.10 Message Centre Monitoring (MCM)12 4.11 Message Browsing .12 4.12 Message Retrieval 13 4.13 Message Centre (MC) Transfer13 5 Acronyms .13 6 Specification framework 13 6.1 General description.13 6.2 Scenarios 14 6.2.1 Message Deposit.14 6.2.1.1 Direct Message Deposit 14
10、6.2.1.2 Message Deposit after Diversion 14 6.2.1.3 Message Deposit after Transfer.14 6.2.2 Message Centre Monitoring (MCM) 15 6.2.3 Message Browsing15 6.2.4 Message Retrieval.15 6.2.5 Message Centre (MC) Transfer 15 7 Profiles .15 7.1 MCA-Profile-1 .15 7.1.1 Message Deposit.15 7.1.1.1 Direct Message
11、 Deposit 15 7.1.1.2 Message Deposit after Diversion 16 7.1.1.3 Message Deposit after Transfer.16 7.1.2 Message Centre Monitoring (MCM) 16 7.1.3 Message Browsing16 7.1.4 Message Retrieval.16 7.1.5 Message Centre (MC) Transfer 17 7.2 MCA-Profile-2 .17 7.2.1 Message Deposit.17 7.2.1.1 Message Deposit a
12、fter Single-Step Call Transfer .17 7.2.2 Message Centre Monitoring (MCM) 17 ETSI ETSI TS 102 253 V1.1.1 (2003-08) 4 7.2.3 Message Browsing17 7.2.4 Message retrieval 18 7.2.5 Message Centre (MC) Transfer 18 7.2.5.1 Message Centre (MC) Transfer Using Single Step Call Transfer .18 7.2.5.2 Message Centr
13、e (MC) Transfer Using Call Transfer 18 7.3 MCA-Profile-3 .18 7.3.1 Message Deposit.18 7.3.2 Message Centre Monitoring (MCM) 19 7.3.3 Message Browsing19 7.3.4 Message retrieval 19 7.3.5 Message Centre (MC) Transfer 19 7.4 MCA-Profile-4 .20 7.4.1 Message Deposit.20 7.4.2 Message Centre Monitoring (MCM
14、) 20 7.4.3 Message Browsing20 7.4.4 Message Retrieval.20 7.4.5 Message Centre (MC) Transfer 21 7.4.5.1 Message Centre Transfer Using Make Call Request.21 Annex A (normative): Requirements List (RL).22 A.1 General .22 A.2 Relationship between RL and corresponding PICS proformas22 A.3 Requirement List
15、 (RL) .22 A.3.1 Tables for Profile 1.22 A.3.1.1 Support of Supplementary Services (SS)23 A.3.1.2 Supplementary Service Message Waiting Indication .23 A.3.1.2.1 General23 A.3.1.2.2 Procedures.23 A.3.1.2.3 Coding.24 A.3.1.2.4 Timers .24 A.3.1.3 Supplementary Service Call Diversion.24 A.3.1.3.1 General
16、24 A.3.1.3.2 Procedures.25 A.3.1.3.3 Coding.26 A.3.1.3.4 Timers .27 A.3.1.4 Supplementary Service Call Transfer .27 A.3.1.4.1 General27 A.3.1.4.2 Procedures for SS-CT-Join .27 A.3.1.4.3 Additional procedures for SS-CT-Rerouteing.28 A.3.1.4.4 Coding.28 A.3.2 Tables for Profile 2.28 A.3.2.1 Support of
17、 Supplementary Services29 A.3.2.2 Supplementary Service Message Waiting Indication .29 A.3.2.3 Supplementary Service Simple Dialog .29 A.3.2.3.1 General29 A.3.2.3.2 Procedures.29 A.3.2.3.3 Coding.30 A.3.2.4 Supplementary Service Call Diversion.30 A.3.2.5 Supplementary Service Call Transfer .30 A.3.2
18、.6 Supplementary Service Single-Step Call Transfer30 A.3.2.6.1 General30 A.3.2.6.2 Procedures.30 A.3.2.6.3 Coding.31 A.3.2.6.4 Timers .31 A.3.3 Tables for Profile 3.31 A.3.3.1 Support of Supplementary Services32 A.3.3.2 Supplementary Service Simple Dialog .32 A.3.3.3 Supplementary Service Message Ce
19、ntre Monitoring32 A.3.3.3.1 General32 A.3.3.3.2 Procedures.33 ETSI ETSI TS 102 253 V1.1.1 (2003-08) 5 A.3.3.3.3 Coding.34 A.3.3.3.4 Timers .34 A.3.3.4 Supplementary Service Message Centre Identification 34 A.3.3.4.1 General34 A.3.3.4.2 Procedures.35 A.3.3.4.3 Coding.35 A.3.3.4.4 Timers .35 A.3.3.5 S
20、upplementary Service Call Diversion.35 A.3.3.6 Supplementary Service Call Transfer .35 A.3.3.7 Supplementary Service Single-Step Call Transfer35 A.3.4 Tables for Profile 4.36 A.3.4.1 Support of Supplementary Services36 A.3.4.2 Supplementary Service Simple Dialog .36 A.3.4.3 Supplementary Service Mes
21、sage Centre Monitoring36 A.3.4.4 Supplementary Service Message Centre Identification 36 A.3.4.5 Supplementary Service Make Call Request36 A.3.4.5.1 General36 A.3.4.5.2 Procedures.37 A.3.4.5.3 Coding.37 A.3.4.5.4 Timers .37 A.3.4.6 Supplementary Service Call Diversion.37 A.3.4.7 Supplementary Service
22、 Call Transfer .37 A.3.4.8 Supplementary Service Single-Step Call Transfer38 Annex B (normative): Profile specific ICS proforma39 B.1 General .39 B.2 Instruction for completing the ICS proforma .39 B.2.1 General structure of the ICS proforma .39 B.2.2 Additional Information.40 B.2.3 Exception Inform
23、ation40 B.3 ICS proforma for Profile 1 .40 B.3.1 Implementation Identification 40 B.3.2 General .40 B.3.3 Message Deposit 41 B.3.4 Message Centre Monitoring .41 B.3.5 Message Browsing .41 B.3.6 Message Retrieval 41 B.3.7 Message Centre Transfer41 B.4 ICS proforma for Profile 2 .42 B.4.1 Implementati
24、on Identification 42 B.4.2 General .42 B.4.3 Message Deposit 42 B.4.4 Message Centre Monitoring .42 B.4.5 Message Browsing .43 B.4.6 Message Retrieval 43 B.4.7 Message Centre Transfer43 B.5 ICS proforma for Profile 3 .44 B.5.1 Implementation Identification 44 B.5.2 General .44 B.5.3 Message Deposit
25、44 B.5.4 Message Centre Monitoring .44 B.5.5 Message Browsing .45 B.5.6 Message Retrieval 45 B.5.7 Message Centre Transfer45 B.6 ICS proforma for Profile 4 .45 B.6.1 Implementation Identification 45 B.6.2 General .46 B.6.3 Message Deposit 46 ETSI ETSI TS 102 253 V1.1.1 (2003-08) 6 B.6.4 Message Cent
26、re Monitoring .46 B.6.5 Message Browsing .46 B.6.6 Message Retrieval 46 B.6.7 Message Centre Transfer47 Annex C (normative): Example Message Flows 48 C.1 Example Message Flows for Profile 1 .48 C.1.1 Message Deposit after Diversion48 C.1.2 Message retrieval49 C.1.3 Message Centre Transfer50 C.2 Exam
27、ple Message Flows for Profile 2 .51 C.2.1 Message retrieval51 C.2.2 Message Centre Single Step Transfer.52 C.3 Example Message Flows for Profile 3 .53 C.3.1 Message Deposit after Diversion53 C.3.2 Message Centre Monitoring .54 C.3.3 Message Centre Browsing55 C.4 Example Message Flows for Profile 4 .
28、56 C.4.1 Message retrieval56 C.4.2 Message Centre Transfer57 History 58 ETSI ETSI TS 102 253 V1.1.1 (2003-08) 7 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is
29、publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the
30、ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which a
31、re, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). Brief History The present document is one of a series of ECMA Standa
32、rds defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under E
33、TSI work item DTS/ECMA-00223. The present documents based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and regional standardization bodies. It represents a pragmati
34、c and widely based consensus. ETSI ETSI TS 102 253 V1.1.1 (2003-08) 8 1 Scope The present document specifies the combination of base standards, together with the selection of appropriate options and parameter values, necessary to specify how QSIG / PSS1 can be used for Message Centre Access (MCA) pr
35、ocedures. The present document identifies the necessary or optional employment of particular functions, procedures and services for: a Calling User to deposit messages for a Served User at a Message Centre; a Served User to monitor the Served Users Mailbox for new messages; a Served User to browse t
36、hrough the messages saved in the Served Users Mailbox; a Served User to retrieve the messages saved in the Served Users Mailbox; and a Served User to get connected to the Originator of a message or any other destination. 2 Conformance A system conforms to the present document if it correctly perform
37、s all the mandatory capabilities defined in one or more of the requirement list (RL) (annex A) and one or more of the profile specific ICS (annex B). NOTE: For the purpose of the present document capabilities marked as optional in the base standards may be mandatory or excluded. 3 References (normat
38、ive) The following standards contain provisions which, through reference in this text, constitute provisions of the present document. All standards are subject to revision, and parties to agreements based on the present document are encouraged to investigate the possibility of applying the most rece
39、nt editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. 1 ECMA -133: “Private Integrated Services Netwo
40、rk (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1)“. 2 ECMA-142: “Private Integrated Services Network (PISN) - Circuit Mode 64kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows (International Standard ISO/IE
41、C 11574)“. 3 ECMA-143: “Private Integrated Services Network (PISN) - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol (QSIG-BC) (International Standard ISO/IEC 11572)“. 4 ECMA-155: “Private Integrated Services Network - Addressing (International Standard ISO/IEC 11571
42、)“. 5 ECMA-165: “Private Integrated Services Network (PISN) - Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (QSIG-GF) (International Standard ISO/IEC 11582)“. 6 ECMA-173: “Private Integrated Services Network (PISN) - Specifi
43、cation, Functional Model and Information Flows - Call Diversion Supplementary Services (CFSD) (International Standard ISO/IEC 13872)“. ETSI ETSI TS 102 253 V1.1.1 (2003-08) 9 7 ECMA-174: “Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Call Diversion Supplementary S
44、ervices (QSIG-CF) (International Standard ISO/IEC 13873)“. 8 ECMA-177: “Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Call Transfer Supplementary Service (CTSD) (International Standard ISO/IEC 13865)“. 9 ECMA-178: “Private Integrated Services Ne
45、twork (PISN) - Inter-Exchange Signalling Protocol - Call Transfer Supplementary Service (QSIG-CT) (International Standard ISO/IEC 13869)“. 10 ECMA-241: “Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Message Waiting Indication Supplementary Servi
46、ce (MWISD) (International Standard ISO/IEC 15505)“. 11 ECMA-242: “Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Message Waiting Indication Supplementary Service (QSIG-MWI) (International Standard ISO/IEC 15506)“. 12 ECMA-299: “Private Integrated Services Network (
47、PISN) - Specification, Functional Model and Information Flows - Single Step Call Transfer Supplementary Service (SSCT-SD) (International Standard ISO/IEC 19459)“. 13 ECMA-300: “Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Single Step Call Transfer Supplementary S
48、ervice (QSIG-SSCT) (International Standard ISO/IEC 19460)“. 14 ECMA-310: “Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Simple Dialog Supplementary Service (SDSD) (International Standard ISO/IEC 21407)“. 15 ECMA-311: “Private Integrated Services
49、 Network (PISN) - Inter-Exchange Signalling Protocol - Simple Dialog Supplementary Service (QSIG-SD) (International Standard ISO/IEC 21408)“. 16 ECMA-343: “Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Make Call Request Supplementary Service (MCRSD)“. 17 ECMA-344: “Private Integrated Services Network (PISN) - Inter-Exchange Signalling Protocol - Make Call Request Supplementary Service (QSIG-MCR)“. 18 ECMA-346: “Private Integrated Services Network (PISN) - Specification, Functi
