1、 ETSI TS 102 545-3 V1.3.1 (2009-06)Technical Specification Broadband Radio Access Networks (BRAN);HiperMAN;Conformance Testing for WiMAX/HiperMAN 1.3.1;Part 3: Abstract Test Suite (ATS)floppy3ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)2Reference RTS/BRAN-004T008-3-R2 Keywords ATS, broadband, DLC, FWA, H
2、iperMAN, point to multipoint, radio, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice In
3、dividual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Docu
4、ment Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the
5、current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be repr
6、oduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2009. WIMAX Forum 2009. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo ar
7、e Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. LTE is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Part
8、ners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)3Contents Intellectual Property Rights 6g3Foreword . 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions and abbreviation
9、s . 8g33.1 Definitions 8g33.2 Abbreviations . 8g34 Abstract Test Method (ATM) . 9g34.1 Test architecture . 9g34.1.1 Test method 9g34.1.1.1 What is notional upper tester? . 9g34.1.2 Test machine operational parameters 11g34.1.3 Test machine configuration. 12g34.1.3.1 Presentation . 12g34.1.3.2 Test s
10、uite TTCN-3 development concept 13g34.1.3.3 Test configurations for SS/MS 14g34.1.3.4 Test configurations for BS 16g34.1.4 Re-use of existing test specifications 17g34.1.5 Test architecture 18g34.1.5.1 Common test architecture . 18g34.1.5.1.1 Single Test Component . 18g34.1.5.1.2 Multiple Test Compo
11、nents 19g34.2 Description of the ports and their associated primitives . 20g34.2.1 The MacMessagePort type 20g34.2.1.1 Description 20g34.2.1.2 Primitives of the MacMsg port 20g34.2.2 The MacBcMessagePort type . 21g34.2.2.1 Description 21g34.2.2.2 Primitives of the BcMacMsg port . 21g34.2.3 The MacPd
12、uPort type . 22g34.2.3.1 Description 22g34.2.3.2 Primitives of the MacPdu port 22g34.2.4 The PhyPort type 24g34.2.4.1 Description 24g34.2.4.2 Primitives of the Phy Port . 24g34.2.5 The TaPort type. . 25g34.2.5.1 Description 25g34.2.5.2 Primitives of the TaPort 25g34.3 Port mapping rules 26g34.4 PDU
13、sending/receiving rules 26g35 Untestable Test Purposes (TP) . 26g36 ATS conventions 27g36.1 Testing conventions 27g36.1.1 Testing States 27g36.1.2 HiperMAN default values: Reception and transmission at ATS level 27g36.1.3 Templates 27g36.1.4 Functions 27g36.2 Naming conventions . 28g36.2.1 General g
14、uidelines 28g36.2.2 Test Case (TC) identifier 29g36.3 Service Flow parameter support . 30g3ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)46.3.1 CsSpecification support 30g36.3.2 DataDeliveryServiceType. 31g36.4 Dispatching of test cases over TTCN modules. 31g37 External functions 32g38 Test strategies . 32
15、g38.1 HARQ testing . 33g38.1.1 HarqAckNack PHY port message 33g38.1.2 HARQ TA Primitives . 33g38.1.3 HARQ Broadcast Message Filter 33g38.1.4 HARQ external Functions 33g38.2 Fast Feedback testing . 34g38.2.1 CQICH PHY port message . 34g38.2.2 CQICH TA Primitives 34g38.2.3 CQICH Broadcast Message Filt
16、er 34g38.2.4 CQICH external Functions . 34g38.3 Handover testing 35g38.3.1 Testing Serving BS . 35g38.3.2 Testing Target BS . 36g38.3.3 Testing MS with Handover or MBS procedure 37g38.4 Processing of EAP messages 37g38.5 Handling MAC PDU with Fragmentation, Packing or Concatenation . 38g38.5.1 MS (I
17、UT) Processing DL MAC PDUs with FRAG Subheader 38g38.5.2 MS (IUT) Processing DL MAC PDU with PACK Subheaders 38g38.5.3 MS (IUT) Processing DL MAC PDU with PACK and FRAG Subheaders 39g38.5.4 MS (IUT) Processing concatenated DL MAC PDUs . 39g38.5.5 MS (IUT) Generating UL MAC PDU with FRAG Subheader .
18、39g38.5.6 MS (IUT) Generating UL MAC PDU with PACK Subheaders . 40g38.5.7 MS (IUT) Generating concatenated UL MAC PDUs . 40g38.5.8 BS (IUT) processing UL MAC PDUs with FRAG Subheader . 40g38.5.9 BS (IUT) processing concatenated UL MAC PDUs . 40g38.5.10 BS (IUT) generating DL MAC PDU with FRAG Subhea
19、der . 41g38.5.11 BS (IUT) generating DL MAC PDU with PACK Subheaders . 41g38.6 Service Flows management for testing BS . 41g38.6.1 Introduction. 41g38.6.2 Handling of service flows in the default. 42g38.6.3 Global variables used for the service flow management. 43g38.6.4 How to invoke a required SF
20、that is not available 44g3Annex A (normative): WiMAX/HiperMAN 1.3.1 Abstract Test Suite (ATS) 45g3A.1 The TTCN-3 Module 45g3Annex B (normative): WiMAX/HiperMAN 1.3.1 Partial PIXIT proforma for IUT BS . 46g3Annex C (normative): WiMAX/HiperMAN 1.3.1 Partial PIXIT proforma for IUT MS 47g3Annex D (norma
21、tive): WiMAX/HiperMAN 1.3.1 PCTR Proforma for IUT BS 48g3D.1 Identification summary. 48g3D.1.1 Protocol conformance test report 48g3D.1.2 IUT identification . 48g3D.1.3 Testing environment . 48g3D.1.4 Limits and reservation 49g3D.1.5 Comments. 49g3D.2 IUT Conformance status 49g3D.3 Static conformanc
22、e summary . 49g3D.4 Dynamic conformance summary 50g3D.5 Static conformance review report . 50g3D.6 Test campaign report 51g3ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)5D.7 Observations . 55g3Annex E (normative): WiMAX/HiperMAN 1.3.1 PCTR Proforma for IUT MS . 56g3E.1 Identification summary. 56g3E.1.1 Pr
23、otocol conformance test report 56g3E.1.2 IUT identification . 56g3E.1.3 Testing environment . 56g3E.1.4 Limits and reservation 57g3E.1.5 Comments. 57g3E.2 IUT Conformance status 57g3E.3 Static conformance summary . 57g3E.4 Dynamic conformance summary 58g3E.5 Static conformance review report . 58g3E.
24、6 Test campaign report 59g3E.7 Observations . 64g3Annex F (normative): HTML documentation . 65g3Annex G (informative): Bibliography . 66g3History 67g3ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been dec
25、lared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, whic
26、h is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
27、 referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present document was dev
28、eloped on the basis of the Abstract Test Suite (ATS) specification for HiperMAN systems that was in the advanced stage of development when the work was reoriented to produce joint HiperMAN/WiMAX specifications. The present document is part 3 of a multi-part deliverable covering Broadband Radio Acces
29、s Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.3.1, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS)“. ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)71
30、 Scope The present document contains the Abstract Test Suite (ATS) to test BRAN HiperMAN1.3.1/WiMAX systems for conformance. The objective of the present document is to provide a basis for conformance tests for BRAN HiperMAN/WiMAX equipment giving a high probability of air interface inter-operabilit
31、y between different manufacturers BRAN HiperMAN/WiMAX equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 5 and ISO/IEC 9646-2 6) as well as the ETSI rules for conformance testing (ETS 300 406 4) are used as a basis for the test methodology. Annex A provides the co
32、de written in Testing and Test Control Notation version 3 (TTCN-3) that is considered integral part of the ATS. Annex B provides the Partial Protocol Implementation eXtra Information for Testing (PIXIT) Proforma of the BS side. Annex C provides the Partial Protocol Implementation eXtra Information f
33、or Testing (PIXIT) Proforma of the MS side. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the BS side. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the MS side. Annex F provides the HTML documentation that is considered integral part of the pres
34、ent document. Annex G provide the bibliography. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. Non-specific reference may be made only to a complete
35、document or a part thereof and only in the following cases: - if it is accepted that it will be possible to use all future changes of the referenced document for the purposes of the referring document; - for informative references. Referenced documents which are not found to be publicly available in
36、 the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are indispensable for the app
37、lication of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. 1 ETSI TS 102 178 (V1.2.1): “Broadband Radio Access Networks (BRAN); HiperMAN; Data Link Control (DLC
38、) layer“. 2 IEEE 802.16-2004: “IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems“. ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)83 IEEE 802.16e-2005: “IEEE Standard for Local and metropolitan area networks - Part 16: Air Interface f
39、or Fixed and Mobile Broadband Wireless Access Systems. Amendment 2: Physical and Medium Access Control Layers for Combined Fixed and Mobile Operation in Licensed Bands and Corrigendum 1“. 4 ETSI ETS 300 406: “Methods for Testing and Specification (MTS); Protocol and profile conformance testing speci
40、fications; Standardization methodology“. 5 ISO/IEC 9646-1/ITU-T Recommendation X.290: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-2/ITU-T Recommendation X.291: “Information technology - Open System
41、s Interconnection - Conformance testing methodology and framework - Part 2: Abstract Test Suite specification“. 7 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification“. 8 ISO/IEC 9646-7: “
42、Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 9 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 1
43、0 IEEE P802.16-2004/Cor1/D3: “Corrigendum to IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems“. 11 ISO/IEC 9646 (All parts): “Information technology - Open Systems Interconnection - Conformance testing methodology and framewo
44、rk“. 2.2 Informative references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. No
45、t applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 8, TS 102 178 1, IEEE 802.16-2004 2 and IEEE 802.16e-2005 3 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations g
46、iven in TS 102 178 1, ISO/IEC 9646-1 5, ISO/IEC 9646-6 7, ISO/IEC 9646-7 8, IEEE 802.16-2004 2, IEEE 802.16e-2005 3 and the following apply: ATS Abstract Test Suite BS Base Station BW BandWidth CID Connection IDentifier CS Convergence SublayerFDD Frequency Division Duplexing HO HandOver IUT Implemen
47、tation Under Test MAC Medium Access Control Layer ETSI ETSI TS 102 545-3 V1.3.1 (2009-06)9MS Mobile Station OFDM Orthogonal Frequency Division Multiplexing OFDMA Orthogonal Frequency Division Multiple Access PHY PHYsical layer PIXIT Partial Protocol Implementation eXtra Information for Testing PMP P
48、oint-to-MultiPointQAM Quadrature Amplitude Modulation QPSK Quadrature Phase Shift Keying REQ REQuest RNG RaNGingRSP ReSPonse RTG Receive/Transmit Transition Gap SS Subscriber Station SUT System Under Test TC Test Case TLV Type, Length, Value TP Test Purposes TTCN Test and Test Control Notation TTG T
49、ransmit/Receive Transition Gap4 Abstract Test Method (ATM) This clause describes the ATM used to test the HiperMAN DLC layer at the BS side and at the SS side. 4.1 Test architecture 4.1.1 Test method The test method chosen is the remote test method with notional upper tester. Remote test method means that the test tool (the test machine + the executable test suite) shall behave as a BS when the IUT is an SS and shall behave as an SS when the IUT is a BS. Notional upper tester means that it is possible to trigger and to fo
