1、 ETSI TS 103 161-18 V1.1.1 (2011-10) Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5; Part 18: Media Terminal Adapter Extension MIB Technical Specification ETSI ETSI TS 103 161-18 V1.1.1 (2011-10)2Reference DTS/ATTM-003011-1
2、8 Keywords access, broadband, cable, IP, multimedia, PSTN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Import
3、ant notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the
4、Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Inform
5、ation on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No par
6、t may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered
7、for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 103 161-18 V1.1.1 (2011-10)3Contents Intellectual P
8、roperty Rights 4g3Foreword . 4g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbreviations . 6g34 Void 6g35 Requirements 7g3History 9g3ETSI ETSI TS 103 161-18 V1.1.1 (2011-10)4Intellectual Property Rights IPRs essential or potentially essen
9、tial to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notifi
10、ed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to t
11、he existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Access, Terminals, Transmission and Mu
12、ltiplexing (ATTM). The present document is part 18 of a multi-part IPCablecom 1.5 deliverable covering the Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services, as identified below: Part 1: “Overview“; Part 2: “Architectural framework for the
13、delivery of time critical services over Cable Television Networks using Cable Modems“; Part 3: “Audio Codec Requirements for the Provision of Bi-Directional Audio Service over Cable Television Networks using Cable Modems“; Part 4: “Network Call Signalling Protocol“; Part 5: “Dynamic Quality of Servi
14、ce for the Provision of Real Time Services over Cable Television Networks using Cable Modems“; Part 6: “Event Message Specification“; Part 7: “Media Terminal Adapter (MTA Management Information Base (MIB)“; Part 8: “Network Call Signalling (NCS) MIB Requirements“; Part 9: “Security“; Part 10: “Manag
15、ement Information Base (MIB) Framework“; Part 11: “Media terminal adapter (MTA) device provisioning“; Part 12: “Management Event Mechanism“; Part 13: “Trunking Gateway Control Protocol - MGCP option“; Part 14: “Embedded MTA Analog Interface and Powering Specification“ Part 15: “Analog Trunking for P
16、BX Specification“; Part 16: “Signalling for Call Management Server“; Part 17: “CMS Subscriber Provisioning Specification“; Part 18: “Media Terminal Adapter Extension MIB“; Part 19: “IPCablecom Audio Server Protocol Specification - MGCP option“; Part 20: “Management Event MIB Specification“; ETSI ETS
17、I TS 103 161-18 V1.1.1 (2011-10)5Part 21: “Signalling Extension MIB Specification“. NOTE 1: Additional parts may be proposed and will be added to the list in future versions. NOTE 2: The choice of a multi-part format for this deliverable is to facilitate maintenance and future enhancements. ETSI ETS
18、I TS 103 161-18 V1.1.1 (2011-10)61 Scope New objects that are being introduced beyond IPCablecom 1.0 for MTA MIBS are being grouped in the present document so that the additional changes made can be tracked easily. 2 References References are either specific (identified by date of publication and/or
19、 edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected
20、 location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the
21、present document. 1 ANSI/SCTE 23-3 (2010): “DOCSIS 1.1 Part 3: Operations Support System Interface“. 2 Cable Television Laboratories, Inc. (CL-SP-MIB-CLABDEF- I09-110210): “CableLabs Definition MIB Specification“, November 2, 2010. 3 ANSI/SCTE 79-2 (2009): “DOCSIS 2.0 Part 2: Operations Support Syst
22、em Interface“. 4 ETSI TS 103 161-7: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5; Part 7: Media Terminal Adapter (MTA) Management Information Base (MIB)“. 5 ETSI TS 103 161-10: “Access, Terminals, Transmission and Multip
23、lexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5; Part 10: Management Information Base (MIB) Framework“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard t
24、o a particular subject area. Not applicable. 3 Definitions and abbreviations Not applicable. 4 Void ETSI ETSI TS 103 161-18 V1.1.1 (2011-10)75 Requirements The IPCablecom Extension MTA MIB must be implemented as defined below, using these references: 1, 2, 3, 4, and 5. PKTC-EN-MTA-MIB DEFINITIONS :=
25、 BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF pktcEnhancements FROM CLAB-DEF-MIB; pktcEnMtaMib MODULE-IDENTITY LAST-UPDATED “200501280000Z January 28, 2005“ ORGANIZATION “Cable Television Laboratories, Inc“ CONTACT-INFO “Sumanth Channaba
26、sappa Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 E-mail: “ DESCRIPTION “This MIB module enhances the basic management objects defined for the PacketCable MTA Device device by the MIB group pktcM
27、taMib. Acknowledgements: Rodney Osborne - Arris Interactive Eugene Nechamkin - BroadCom Corporation Satish Kumar - Texas Instruments Jean-Francois Mule - CableLabs Venkatesh Sunkad - CableLabs Copyright 1999-2005 Cable Television Laboratories, Inc. All rights reserved.“ REVISION “200501280000Z“ DESC
28、RIPTION “This revision is being published as part of the PacketCable MTA MIBs enhancements for PacketCable 1.5.“ := pktcEnhancements 1 - - PacketCable Enhanced MTA MIB Objects - pktcEnMtaMibObjects OBJECT IDENTIFIER := pktcEnMtaMib 1 pktcEnMtaDevBase OBJECT IDENTIFIER := pktcEnMtaMibObjects 1 pktcEn
29、MtaDevServer OBJECT IDENTIFIER := pktcEnMtaMibObjects 2 pktcEnMtaDevSecurity OBJECT IDENTIFIER := pktcEnMtaMibObjects 3 - - Enhanced notification group. - pktcEnMtaNotificationPrefix OBJECT IDENTIFIER := pktcEnMtaMib 2 pktcEnMtaNotification OBJECT IDENTIFIER := pktcEnMtaNotificationPrefix 0 pktcEnMt
30、aConformance OBJECT IDENTIFIER := pktcEnMtaMib 3 pktcEnMtaCompliances OBJECT IDENTIFIER := pktcEnMtaConformance 1 pktcEnMtaGroups OBJECT IDENTIFIER := pktcEnMtaConformance 2 - - Enhancement MIB Objects - pktcEnMtaDevMltplGrantsPerInterval OBJECT-TYPE SYNTAX INTEGER enablemgpifunctionality(1), ETSI E
31、TSI TS 103 161-18 V1.1.1 (2011-10)8disablemgpifunctionality(2) MAX-ACCESS read-only STATUS current DESCRIPTION “ This object is used to control the Multiple grants functionality on a PacketCable MTA. To indicate enabling of this functionality, a value of enablemgpifunctionality(1) is used. To indica
32、te disabling of this functionality, a value of disablemgpifunctionality(2) is used.“ DEFVAL disablemgpifunctionality := pktcEnMtaDevBase 1 - - Compliance statements - pktcEnMtaBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION “The compliance statement for devices that implement MTA featur
33、e.“ MODULE -PKTC-EN-MTA-MIB - - Mandatory groups - MANDATORY-GROUPS pktcEnMtaGroup := pktcEnMtaCompliances 3 pktcEnMtaGroup OBJECT-GROUP OBJECTS pktcEnMtaDevMltplGrantsPerInterval STATUS current DESCRIPTION “Group of Enhanced objects for the PacketCable MTA MIB.“ := pktcEnMtaGroups 1 END ETSI ETSI TS 103 161-18 V1.1.1 (2011-10)9History Document history V1.1.1 October 2011 Publication
