1、 ETSI TS 103 161-2 V1.1.1 (2011-10) Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5; Part 2: Architectural framework for the delivery of time critical services over Cable Television Networks using Cable Modems Technical Spec
2、ification ETSI ETSI TS 103 161-2 V1.1.1 (2011-10)2Reference DTS/ATTM-003011-2 Keywords access, broadband, cable, IP, multimedia, PSTN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b
3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived
4、 difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aw
5、are that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: h
6、ttp:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2011. All rights reserved. DECT
7、TM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM A
8、ssociation. ETSI ETSI TS 103 161-2 V1.1.1 (2011-10)3Contents Intellectual Property Rights 5g3Foreword . 5g31 Scope 7g31.1 IPCablecom Overview . 7g31.2 IPCablecom Motivation . 7g31.3 IPCablecom Project Phasing 7g32 References 8g32.1 Normative references . 8g32.2 Informative references 8g33 Definition
9、s and abbreviations . 10g33.1 Definitions 10g33.2 Abbreviations . 11g34 Void 13g35 IPCablecom 1.5 13g35.1 IPCablecom Architecture Framework 14g35.2 IPCablecom Zones and Domains . 15g35.3 IPCablecom 1.5 Analog Trunking Specifications 15g35.4 IPCablecom 1.5 Design Considerations . 16g35.4.1 General Ar
10、chitectural Goals . 16g35.4.2 Call Signalling 17g35.4.3 Quality of Service . 18g35.4.4 CODEC and Media Stream . 18g35.4.5 Device Provisioning and OSS . 18g35.4.6 Security . 19g35.4.7 Lawful Interception. 19g36 IPCablecom Functional Components . 19g36.1 Media Terminal Adapter (MTA) 20g36.1.1 MTA Func
11、tional Requirements 20g36.1.2 MTA Attributes 20g36.2 Cable Modem (CM) . 21g36.3 HFC Access Network . 21g36.4 Cable Modem Termination System (CMTS) . 21g36.4.1 CMTS Gate . 22g36.5 Call Management Server (CMS) 22g36.6 PSTN Gateway . 23g36.6.1 Media Gateway Controller (MGC) . 23g36.6.2 Media Gateway (M
12、G) . 23g36.6.2.1 Media Gateway Functions . 24g36.6.3 Signalling Gateway (SG) 24g36.6.3.1 SS7 Signalling Gateway Functions . 24g36.7 OSS Back Office Components . 25g36.7.1 Security Server - Key Distribution Centre (KDC) 25g36.7.2 Dynamic Host Configuration Protocol Server (DHCP) 25g36.7.3 Domain Name
13、 System Server (DNS) . 25g36.7.4 Trivial File Transfer Protocol Server or Hypertext Transfer Protocol Server (TFTP or HTTP) 25g36.7.5 SYSLOG Server (SYSLOG) 25g36.7.6 Record Keeping Server (RKS) 25g36.8 Announcement Server (ANS). 25g36.8.1 Announcement Controller (ANC) . 26g36.8.2 Announcement Playe
14、r (ANP) . 26g37 Protocol Interfaces 26g37.1 Call Signalling Interfaces . 26g3ETSI ETSI TS 103 161-2 V1.1.1 (2011-10)47.1.1 Network-based Call Signalling (NCS) Framework 27g37.1.2 PSTN Signalling Framework 28g37.1.3 CMS to CMS Signalling Framework 28g37.2 Media Streams 28g37.2.1 Real-time Transport C
15、ontrol Protocol (RTCP) . 30g37.3 MTA Device Provisioning . 31g37.4 SNMP Element Management Layer Interfaces 32g37.5 Event Messages Interfaces . 32g37.5.1 Event Message Framework . 32g37.6 Quality of Service (QoS) 34g37.6.1 QoS Framework 34g37.6.2 Dynamic Quality of Service 35g37.7 CMS Subscriber Pro
16、visioning 36g37.8 Lawful Interception 37g37.9 Security 37g37.9.1 Overview 37g37.9.2 Device Provisioning Security . 40g37.9.2.1 Subscriber Enrolment 40g37.9.2.2 Device Provisioning 40g37.9.2.3 Dynamic Provisioning . 40g37.9.2.4 Device Authorization 40g37.9.2.5 Signalling Security 41g37.9.2.6 Media St
17、ream Security 41g37.9.2.7 OSS and Billing System Security 41g38 Network Design Considerations . 41g38.1 Time Keeping and Reporting Issues . 41g38.2 Timing for Playout Buffer Alignment with Coding Rate . 41g38.3 IP Addressing . 42g38.4 Dynamic IP Address Assignment . 42g38.5 Fully Qualified Domain Na
18、me (FQDN) Assignment . 42g38.6 Priority Marking of Signalling and Media Stream Packets 42g38.7 Fax Support 43g38.8 Analog Modem Support . 43g38.9 DTMF Relay 44g3History 45g3ETSI ETSI TS 103 161-2 V1.1.1 (2011-10)5Intellectual Property Rights IPRs essential or potentially essential to the present doc
19、ument may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect o
20、f ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other I
21、PRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Access, Terminals, Transmission and Multiplexing (ATTM). The
22、present document is part 2 of a multi-part IPCablecom 1.5 deliverable covering the Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services, as identified below: Part 1: “Overview“; Part 2: “Architectural framework for the delivery of time critica
23、l services over Cable Television Networks using Cable Modems“; Part 3: “Audio Codec Requirements for the Provision of Bi-Directional Audio Service over Cable Television Networks using Cable Modems“; Part 4: “Network Call Signalling Protocol“; Part 5: “Dynamic Quality of Service for the Provision of
24、Real Time Services over Cable Television Networks using Cable Modems“; Part 6: “Event Message Specification“; Part 7: “Media Terminal Adapter (MTA Management Information Base (MIB)“; Part 8: “Network Call Signalling (NCS) MIB Requirements“; Part 9: “Security“; Part 10: “Management Information Base (
25、MIB) Framework“; Part 11: “Media terminal adapter (MTA) device provisioning“; Part 12: “Management Event Mechanism“; Part 13: “Trunking Gateway Control Protocol - MGCP option“; Part 14: “Embedded MTA Analog Interface and Powering Specification“ Part 15: “Analog Trunking for PBX Specification“; Part
26、16: “Signalling for Call Management Server“; Part 17: “CMS Subscriber Provisioning Specification“; Part 18: “Media Terminal Adapter Extension MIB“; Part 19: “IPCablecom Audio Server Protocol Specification - MGCP option“; Part 20: “Management Event MIB Specification“; ETSI ETSI TS 103 161-2 V1.1.1 (2
27、011-10)6Part 21: “Signalling Extension MIB Specification“. NOTE 1: Additional parts may be proposed and will be added to the list in future versions. NOTE 2: The choice of a multi-part format for this deliverable is to facilitate maintenance and future enhancements. ETSI ETSI TS 103 161-2 V1.1.1 (20
28、11-10)71 Scope 1.1 IPCablecom Overview The IPCablecom project defines interface specifications that can be used to develop interoperable equipment capable of providing packet-based voice, video and other high-speed multimedia services over hybrid fibre coax (HFC) cable systems utilizing the DOCSISpr
29、otocol i.14. Any reference to DOCSISin the present document is understood to be DOCSISversion 1.1 or later. IPCablecom defines a communication services architecture that overlays the two-way data-ready broadband cable access network. Within the overall IPCablecom framework, IPCablecom version 1.5, w
30、hich is the subject of this Technical Report, is designed to provide digital voice and telephony services. The objective of this IPCablecom Architecture Technical Report is to provide a high-level reference framework that identifies the functional components and defines the interfaces necessary to i
31、mplement the capabilities detailed in the individual IPCablecom 1.5 specifications as listed in clause 5.3. 1.2 IPCablecom Motivation The emergence of the Internet Protocol (IP) as the standard transport for packet data networks has enabled a revolution in communications services and applications. N
32、OTE: IPCablecom 1.5 supports only IPv4 at the present time. This online revolution is demonstrated by the widespread use of email, chat groups, music, video, and the explosive growth of the World Wide Web for entertainment, information exchange, online commerce, and a wide range of new and innovativ
33、e services. New classes of IP-based information appliances are also emerging, including multimedia personal computers, IP-based set top boxes, and IP-based voice and videophones. In recent years the growth of a worldwide IP-based data network, coupled with the rapid growth in the number of household
34、s that have online access, have resulted in an environment that allows service providers to offer integrated voice and data services over a common broadband cable access network and IP transport backbone. While the initial application of Voice over IP (VoIP) technology was for toll bypass services (
35、particularly high-cost international toll service) the technology is now sufficiently mature that it is feasible to offer IP-based voice communication services similar to those offered by telecommunications carriers on the Public Switched Telephone Network (PSTN). With the success of the DOCSISstand
36、ardization effort, the Quality of Service (QoS) enhancements of DOCSIS, and the acceleration of major cable system upgrades for two-way capability, the infrastructure is in place for development and deployment of packetized voice and video applications. These applications can be deployed with limite
37、d incremental cost, providing a technically distinctive and cost-effective alternative for subscribers voice communications needs, as well as a platform for introducing the next generation of voice and other real-time multimedia services. 1.3 IPCablecom Project Phasing The IPCablecom architecture is
38、 designed to be a robust, complete, end-to-end broadband architecture that supports voice, video, and other multimedia services. The architecture is capable of supporting millions of subscribers over multiple cable operator networks. It is understood that the initial focus of the IPCablecom architec
39、ture is to support the time-to-market business considerations for deploying packet-based services. Going forward, the IPCablecom architecture will continue to evolve to meet Member business requirements and to accommodate advances resulting from the maturing of IP-based technology. The IPCablecom pr
40、oject will release specifications that define this architecture in a phased approach according to technical feasibility and business priority. As new IPCablecom specifications are released, they will complement the previously released specifications. ETSI ETSI TS 103 161-2 V1.1.1 (2011-10)82 Referen
41、ces References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Refer
42、enced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references
43、The following referenced documents are necessary for the application of the present document. Not applicable. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area.
44、 i.1 ETSI TS 103 161-3: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5; Part 3: Audio Codec Requirements for the Provision of Bi-Directional Audio Service over Cable Television Networks using Cable Modems“. i.2 ETSI TS 103
45、 161-5: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 5: Dynamic Quality of Service for the Provision of Real Time Services over Cable Television Networks using Cable Modems“. i.3 ETSI TS 103 161-4: “Access, Terminal
46、s, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 4: Network Call Signalling Protocol“. i.4 ETSI TS 103 161-6: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5;
47、Part 6: Event Message Specification“. i.5 ETSI TS 103 161-7: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 7: Media Terminal Adapter (MTA) Management Information Base (MIB)“. i.6 ETSI TS 103 161-8: “Access, Terminals
48、, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 8: Network Call Signalling (NCS) MIB Requirements“. i.7 ETSI TS 103 161-10: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IP
49、Cablecom 1.5 Part 10: Management Information Base (MIB) Framework“. i.8 ETSI TS 103 161-13: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 13: Trunking Gateway Control Protocol - MGCP option“. i.9 ETSI TS 103 161-11: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated Broadband Cable and Television Networks; IPCablecom 1.5 Part 11: Media Terminal Adapter (MTA) device provisioning“. i.10 ETSI TS 103 161-9: “Access, Terminals, Transmission and Multiple
