ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf

上传人:ideacase155 文档编号:741107 上传时间:2019-01-11 格式:PDF 页数:39 大小:257.31KB
下载 相关 举报
ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf_第1页
第1页 / 共39页
ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf_第2页
第2页 / 共39页
ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf_第3页
第3页 / 共39页
ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf_第4页
第4页 / 共39页
ETSI TS 124 103-2018 Universal Mobile Telecommunications System (UMTS) LTE Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS) Stage 3 (V15 0 0 3GPP TS 24 1.pdf_第5页
第5页 / 共39页
点击查看更多>>
资源描述

1、 ETSI TS 124 103 V14.2.0 (2018-01) Universal Mobile Telecommunications System (UMTS); LTE; Telepresence using the IP Multimedia (IM) Core Network (CN) Subsystem (IMS); Stage 3 (3GPP TS 24.103 version 14.2.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 124 103 V14.2.0 (2018-01)13GPP TS 24.103 ver

2、sion 14.2.0 Release 14Reference RTS/TSGC-0124103ve20 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7

3、803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the pr

4、ior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present

5、 document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to

6、one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The cont

7、ent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of i

8、ts Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 124 103 V14.2.0

9、2018-01)23GPP TS 24.103 version 14.2.0 Release 14Intellectual Property Rights Essential patents IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-

10、members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Purs

11、uant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present doc

12、ument. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or trad

13、ename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present d

14、ocument may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/we

15、bapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of pro

16、visions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 124 103 V14.2.0 (2018-01)33GPP TS 24.103 version 14.2.0 Release 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 Refere

17、nces 6g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 7g33.3 Abbreviations . 7g34 Telepresence overview . 8g34.1 General . 8g34.2 Spatial information . 8g34.3 Media information 8g34.4 Meeting description 9g34.5 Presentation 9g34.6 Information usage . 9g35 Protocol usin

18、g SIP for telepresence 9g35.1 Introduction 9g35.2 Functional entities 10g35.2.1 User Equipment (UE) . 10g35.2.2 Media Resource Function Controller (MRFC) . 10g35.2.3 Conferencing Application Server (Conferencing AS) 10g35.3 Role 10g35.3.1 Participant . 10g35.3.2 Conference Focus . 10g36 Protocol usi

19、ng SDP for telepresence 10g36.1 Introduction 10g36.2 Functional entities 10g36.2.1 User Equipment (UE) . 10g36.2.2 Media Resource Function Controller (MRFC) . 11g36.2.3 Conferencing Application Server (Conferencing AS) 11g36.3 Roles . 11g36.3.1 Participant . 11g36.3.1.1 General 11g36.3.1.2 Initiatio

20、n of IM session supporting telepresence . 11g36.3.1.2.1 Origination procedures 11g36.3.1.2.2 Termination procedures. 12g36.3.1.3 Session update . 12g36.3.1.4 End of IM session supporting telepresence . 12g36.3.2 Conference Focus . 13g36.3.2.1 General 13g36.3.2.2 Initiation of IM session supporting t

21、elepresence . 13g36.3.2.2.1 Origination procedures 13g36.3.2.2.2 Termination procedures. 13g36.3.2.3 Session update . 13g36.3.2.4 End of IM session supporting telepresence . 13g37 Protocol using CLUE for telepresence . 14g37.1 Introduction 14g37.2 Functional entities 14g37.2.1 User Equipment (UE) .

22、14g37.2.2 Media Resource Function (MRF) . 14g3ETSI ETSI TS 124 103 V14.2.0 (2018-01)43GPP TS 24.103 version 14.2.0 Release 147.2.3 Conferencing Application Server (Conferencing AS) 14g37.3 Roles . 14g37.3.1 Media provider 14g37.3.1.1 General 14g37.3.1.2 Media capture advertisement 15g37.3.1.2.1 Mult

23、iple content switching and composition . 15g37.3.1.2.2 Presentation Initiation 15g37.3.2 Media consumer 15g37.3.2.1 General 15g37.3.2.2 Media capture configuration . 15g37.3.2.2.1 Multiple content switching and composition . 16g37.3.2.2. 2 Presentation selection 16g38 Protocol for floor control for

24、telepresence . 16g38.1 Introduction 16g3Annex A (informative): Example signalling flows . 17g3A.1 Scope of signalling flows . 17g3A.2 Key required to interpret signalling flows 17g3A.3 Flows demonstrating the creation of an IM conference supporting telepresence 18g3A.3.1 Introduction 18g3A.3.2 User

25、creating an IM conference supporting telepresence . 18g3A.3.3 User invited to an IM conference supporting telepresence . 35g3A.4 Flows demonstrating the update of an onging IM conference supporting telepresence . 36g3Annex B (informative): Change history . 37g3History 38g3ETSI ETSI TS 124 103 V14.2.

26、0 (2018-01)53GPP TS 24.103 version 14.2.0 Release 14Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG

27、 modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates

28、 TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 124 103 V14.2.0 (2018

29、01)63GPP TS 24.103 version 14.2.0 Release 141 Scope The present document provides the protocol details for telepresence using the IP Multimedia (IM) Core Network (CN) subsystem based on the Session Initiation Protocol (SIP), the Session Description Protocol (SDP), the Binary Floor Control Protocol

30、BFCP) and the ControLling mUltiple streams for tElepresence (CLUE) controlling multiple streams for telepresence based on service requirements. The present document addresses the areas of describing and negotiating IM session with multiple media streams based on the IM CN subsystem, including point

31、 to point calls as specified in 3GPP TS 24.229 2 and multiparty conferences as specified in 3GPP TS 24.147 3, to facilitate the support of telepresence. The functionalities for conference policy control and the signalling between a MRFC and a MRFP are not specified in this document. Where possible,

32、the present document specifies the requirements for this protocol by reference to specifications produced by the IETF within the scope of SIP, SDP, CLUE and BFCP, either directly, or as modified by 3GPP TS 24.229 2. The present document is applicable to Application Servers (ASs), Multimedia Resource

33、 Function Controllers (MRFCs), Multimedia Resource Function Processors (MRFP) and User Equipment (UE) providing IM session supporting telepresence capabilities. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present documen

34、t. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (inc

35、luding a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 24.229: “Internet Protocol (IP) multimedia call control protocol based on Session I

36、nitiation Protocol (SIP) and Session Description Protocol (SDP); Stage 3“. 3 3GPP TS 24.147: “Conferencing using the IP Multimedia (IM) Core Network (CN) subsystem; Stage 3“. 4 draft-ietf-clue-framework-25 (January 2016): “Framework for Telepresence Multi-Streams“. Editors note: The above document c

37、annot be formally referenced until it is published as an RFC. 5 draft-ietf-clue-datachannel-14 (August 2016): “CLUE Protocol data channel“. Editors note: The above document cannot be formally referenced until it is published as an RFC. 6 draft-ietf-clue-signaling-11 (March 2017): “CLUE Signaling“. E

38、ditors note: The above document cannot be formally referenced until it is published as an RFC. 7 draft-ietf-mmusic-sctp-sdp-26 (April 2017): “Session Description Protocol (SDP) Offer/Answer Procedures For Stream Control Transmission Protocol (SCTP) over Datagram Transport Layer Security (DTLS) Trans

39、port“. Editors note: The above document cannot be formally referenced until it is published as an RFC. 8 IETF RFC 3264 (June 2002): “An Offer/Answer Model with Session Description Protocol (SDP)“. ETSI ETSI TS 124 103 V14.2.0 (2018-01)73GPP TS 24.103 version 14.2.0 Release 149 draft-ietf-clue-data-m

40、odel-schema-17 (August 2016): “An XML Schema for the CLUE data model“. Editors note: The above document cannot be formally referenced until it is published as an RFC. 10 3GPP TS 23.218: “IP Multimedia (IM) session handling; IM call model; Stage 2“. 11 draft-ietf-mmusic-dtls-sdp-32 (October 2017): “S

41、ession Description Protocol (SDP) Offer/Answer Considerations for Datagram Transport Layer Security (DTLS) and Transport Layer Security (TLS)“. Editors note: The above document cannot be formally referenced until it is published as an RFC. 3 Definitions, symbols and abbreviations 3.1 Definitions For

42、 the purposes of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. IM session: An IP multimedia (IM) session is a set of multime

43、dia senders and receivers and the data streams flowing from senders to receivers. IP multimedia sessions are supported by the IP multimedia CN Subsystem and are enabled by IP connectivity bearers (e.g. GPRS as a bearer). A user may invoke concurrent IP multimedia sessions. Telepresence: A conference

44、 with interactive audio-visual communications experience between remote locations, where the users enjoy a strong sense of realism and presence between all participants by optimizing a variety of attributes such as audio and video quality, eye contact, body language, spatial audio, coordinated envir

45、onments and natural image size. 3.2 Symbols 3.3 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in 3GPP

46、TR 21.905 1. AS Application Server BFCP Binary Floor Control Protocol CLUE ControLling mUltiple streams for tElepresence DTLS Datagram Transport Layer Security IMS IP Multimedia CN subsystem MCC Multiple Content Capture MRF Multimedia Resource Function MRFC Multimedia Resource Function Controller MR

47、FP Multimedia Resource Function Processor SCTP Stream Control Transmission Protocol SDP Session Description Protocol SIP Session Initiation Protocol TP TelePresence TP UE TelePresence User Equipment UE User Equipment ETSI ETSI TS 124 103 V14.2.0 (2018-01)83GPP TS 24.103 version 14.2.0 Release 144 Te

48、lepresence overview 4.1 General As an architectural framework for provision of IP multimedia services, IMS is capable of delivering various service functionalities and easing to integrate with new kinds of application, such as telepresence. Compared to traditional video conference, telepresence is a

49、 communication system with multiple cameras, microphones and screens that has the characteristics of gaze direction, eye contact, spatial audio and scaling images to true size, which in all to achieve the immersive “being there“ experience for participants. IMS is using the IETF defined session control mechanism with the inherited capability to negotiate multiple multimedia streams in one single session, which could be applied as a basis for supporting telepresence in IMS that always has the necessity of producing and rendering variou

展开阅读全文
相关资源
猜你喜欢
  • BS 6931-1988 Glossary of terms for copper and copper alloys《铜和铜合金的术语词汇》.pdf BS 6931-1988 Glossary of terms for copper and copper alloys《铜和铜合金的术语词汇》.pdf
  • BS 6940-1-1990 Total Access Communication System (T A C S) - Specification for performance requirements for mobile stations《全通路通信系统(TACS) 第1部分 移动电台性能要求规范》.pdf BS 6940-1-1990 Total Access Communication System (T A C S) - Specification for performance requirements for mobile stations《全通路通信系统(TACS) 第1部分 移动电台性能要求规范》.pdf
  • BS 6940-2-1990 Total Access Communication System (T A C S) - Specification for performance and tests of the signalling system of mobile stations《全通路通信系统(TACS) 第2部分 移动电台信号系统性能和试验规范》.pdf BS 6940-2-1990 Total Access Communication System (T A C S) - Specification for performance and tests of the signalling system of mobile stations《全通路通信系统(TACS) 第2部分 移动电台信号系统性能和试验规范》.pdf
  • BS 6942-2-1989 Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas《.pdf BS 6942-2-1989 Design and construction of small kits for oxy-fuel gas welding and allied processes - Specification for kits using refillable gas containers for oxygen and fuel gas《.pdf
  • BS 6944-1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)《黑色金属(不包括压力管应用的)闪光对接焊规范》.pdf BS 6944-1988 Specification for flash welding of butt joints in ferrous metals (excluding pressure piping applications)《黑色金属(不包括压力管应用的)闪光对接焊规范》.pdf
  • BS 6946-1988 Specification for metal channel cable support systems for electrical installations《电气设备用金属管道电缆支撑系统规范》.pdf BS 6946-1988 Specification for metal channel cable support systems for electrical installations《电气设备用金属管道电缆支撑系统规范》.pdf
  • BS 6949-1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water《与饮用水接触除外的冷用沥青基涂层规范》.pdf BS 6949-1991 Specification for bitumen-based coatings for cold application excluding use in contact with potable water《与饮用水接触除外的冷用沥青基涂层规范》.pdf
  • BS 6953-1988 Glossary of terms for procedures for setting out measurement and surveying in building construction (including guidance notes)《建筑结构定线、测量和勘探程序的术语词汇》.pdf BS 6953-1988 Glossary of terms for procedures for setting out measurement and surveying in building construction (including guidance notes)《建筑结构定线、测量和勘探程序的术语词汇》.pdf
  • BS 6954-1-1988 Tolerances for building - Recommendations for basic principles for evaluation and specification《建筑用公差 第1部分 评估基本原则和规范的推荐标准》.pdf BS 6954-1-1988 Tolerances for building - Recommendations for basic principles for evaluation and specification《建筑用公差 第1部分 评估基本原则和规范的推荐标准》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1