1、 ETSI TS 125 101 V15.2.0 (2018-07) Universal Mobile Telecommunications System (UMTS); User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 15.2.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 101 V15.2.0 (2018-07)13GPP TS 25.101 version 15.2.0 Release 15Reference
2、 RTS/TSGR-0425101vf20 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present
3、 document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI.
4、In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the
5、document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: http
6、s:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be
7、 modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare tra
8、demarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 101 V15.2.0 (2018-07)23GPP TS 25.101 version 15
9、.2.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI
10、 SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no i
11、nvestigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present doc
12、ument may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademark
13、s in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical sp
14、ecifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp.
15、Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ a
16、re NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 101 V15.2.0 (2018-07)33GPP TS 25.101 version 15.2.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 14g31 Scope 15g32 References 15g33 Definitions, symbols
17、 and abbreviations . 15g33.1 Definitions 15g33.2 Abbreviations . 17g34 General . 19g34.1 Relationship between Minimum Requirements and Test Requirements 19g34.2 Power Classes . 19g34.3 Control and monitoring functions 19g34.3.1 Minimum requirement 20g34.4 RF requirements in later releases . 20g35 Fr
18、equency bands and channel arrangement 20g35.1 General . 20g35.2 Frequency bands . 20g35.3 TX-RX frequency separation . 23g35.4 Channel arrangement 24g35.4.1 Channel spacing 24g35.4.2 Channel raster . 24g35.4.3 Channel number 24g35.4.4 UARFCN 27g36 Transmitter characteristics . 28g36.1 General . 28g3
19、6.2 Transmit power 28g36.2.1 UE maximum output power 28g36.2.1A UE maximum output power for UL OLTD 30g36.2.1B UE maximum output power for UL CLTD 31g36.2.1C UE maximum output power for UL MIMO 32g36.2.1D UE maximum output power for DB-DC-HSUPA 33g36.2.2 UE maximum output,power with HS-DPCCH and E-D
20、CH . 33g36.2.2A UE maximum output,power for DC-HSUPA . 34g36.2.2B UE maximum output power with HS-DPCCH and E-DCH for UL OLTD 35g36.2.2C UE maximum output power with HS-DPCCH and E-DCH for UL CLTD 35g36.2.2D UE maximum output power with HS-DPCCH and E-DCH for UL MIMO . 36g36.2.2E UE maximum output p
21、ower for the band with HS-DPCCH and E-DCH for DB-DC-HSUPA 37g36.2.3 UE Relative code domain power accuracy . 37g36.2.3A UE Relative code domain power accuracy for DC-HSUPA . 38g36.2.3B UE Relative code domain power accuracy for UL OLTD 38g36.2.3C UE Relative code domain power accuracy for UL CLTD 38
22、g36.2.3D UE Relative code domain power accuracy for UL MIMO . 39g36.2.3E UE Relative code domain power accuracy for DB-DC-HSUPA 39g36.3 Frequency Error 39g36.3A Frequency Error for DC-HSUPA . 39g36.3B Frequency error for UL OLTD . 39g36.3C Frequency error for UL CLTD . 39g36.3D Frequency error for U
23、L MIMO 39g36.3E Frequency error for DB-DC-HSUPA . 39g36.4 Output power dynamics 40g36.4.1 Open loop power control 40g36.4.1.1 Minimum requirement 40g3ETSI ETSI TS 125 101 V15.2.0 (2018-07)43GPP TS 25.101 version 15.2.0 Release 156.4.1.1A Additional requirement for DC-HSUPA . 40g36.4.1.1B Additional
24、requirement for DB-DC-HSUPA 40g36.4.2 Inner loop power control in the uplink 40g36.4.2.1 Power control steps . 40g36.4.2.1.1 Minimum requirement . 40g36.4.2.1.1A Additional requirement for DC-HSUPA . 42g36.4.2.1.1B Additional requirement for UL OLTD 42g36.4.2.1.1C Additional requirement for UL CLTD
25、42g36.4.2.1.1D Additional requirement for UL MIMO 42g36.4.2.1.1E Additional requirement for DB-DC-HSUPA 42g36.4.3 Minimum output power 42g36.4.3.1 Minimum requirement 42g36.4.3.1A Additional requirement for DC-HSUPA . 43g36.4.3.1B Additional requirement for UL OLTD 43g36.4.3.1C Additional requiremen
26、t for UL CLTD 43g36.4.3.1D Additional requirement for UL MIMO . 43g36.4.3.1E Additional requirement for DB-DC-HSUPA 43g36.4.4 Out-of-synchronization handling of output power 43g36.4.4.1 Minimum requirement 43g36.4.4.1A Additional requirement for UL OLTD 44g36.4.4.1B Additional requirement for UL CLT
27、D 44g36.4.4.1C Additional requirement for UL MIMO . 44g36.4.4.1D Additional requirement for DB-DC-HSUPA 44g36.4.4.2 Test case 44g36.4A Output pattern dynamics 46g36.4A.1 Out-of-quality handling of TPI applicability 46g36.4A.1.1 Minimum requirement 46g36.4A.1.2 Test case 47g36.5 Transmit ON/OFF power
28、 . 49g36.5.1 Transmit OFF power . 49g36.5.1.1 Minimum requirement 49g36.5.1.1A Additional requirement for DC-HSUPA . 49g36.5.1.1B Additional requirement for UL OLTD 49g36.5.1.1C Additional requirement for UL CLTD 49g36.5.1.1D Additional requirement for UL MIMO . 49g36.5.1.1E Additional requirement f
29、or DB-DC-HSUPA 49g36.5.2 Transmit ON/OFF Time mask 49g36.5.2.1 Minimum requirement 50g36.5.2.1A Additional requirement for UL OLTD 52g36.5.2.1B Additional requirement for UL CLTD 53g36.5.2.1C Additional requirement for UL MIMO . 53g36.5.2.1D Additional requirement for DB-DC-HSUPA operating simultane
30、ously with CS . 53g36.5.3 Change of TFC . 53g36.5.3.1 Minimum requirement 53g36.5.3.1A Additional requirement for UL OLTD 54g36.5.3.1B Additional requirement for UL CLTD 54g36.5.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 54g36.5.4 Power setting in uplink compresse
31、d mode 55g36.5.4.1 Minimum requirement 55g36.5.4.1A Additional requirement for UL OLTD 56g36.5.4.1B Additional requirement for UL CLTD 56g36.5.4.1C Additional requirement for DB-DC-HSUPA 57g36.5.5 HS-DPCCH. 57g36.5.5.1 Minimum requirement 57g36.5.5.1A Additional requirement for UL OLTD 59g36.5.5.1B
32、Additional requirement for UL CLTD 59g36.5.5.1C Additional requirement for UL MIMO . 59g36.5.5.1D Additional requirement for DB-DC-HSUPA 59g36.6 Output RF spectrum emissions . 59g36.6.1 Occupied bandwidth . 59g36.6.1A Occupied bandwidth for DC-HSUPA . 59g36.6.1B Occupied bandwidth for UL OLTD 60g3ET
33、SI ETSI TS 125 101 V15.2.0 (2018-07)53GPP TS 25.101 version 15.2.0 Release 156.6.1C Occupied bandwidth for UL CLTD 60g36.6.1D Occupied bandwidth for UL MIMO . 60g36.6.1E Occupied bandwidth for DB-DC-HSUPA 60g36.6.2 Out of band emission 60g36.6.2.1 Spectrum emission mask . 60g36.6.2.1.1 Minimum requi
34、rement. 60g36.6.2.1A Additional Spectrum emission mask for DC-HSUPA 62g36.6.2.1A.1 Minimum requirement . 62g36.6.2.1A.2 Additional requirement for band II, IV, V, X, XXV and XXVI 62g36.6.2.1B Additional requirement for UL OLTD 62g36.6.2.1C Additional requirement for UL CLTD 63g36.6.2.1D Additional r
35、equirement for UL MIMO . 63g36.6.2.1E Additional requirement for DB-DC-HSUPA 63g36.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 63g36.6.2.2.1 Minimum requirement . 63g36.6.2.2.1A Additional requirement for DC-HSUPA . 63g36.6.2.2.1B Additional requirement for UL OLTD 64g36.6.2.2.1C Additional
36、requirement for UL CLTD 64g36.6.2.2.1D Additional requirement for UL MIMO 64g36.6.2.2.1E Additional requirement for DB-DC-HSUPA 64g36.6.3 Spurious emissions . 64g36.6.3.1 Minimum requirement 64g36.6.3.1.1 Additional requirement 72g36.6.3.1A Additional requirement for DC-HSUPA . 72g36.6.3.1A.1 Additi
37、onal requirement for DC-HSUPA . 80g36.6.3.1B Additional requirement for UL OLTD 80g36.6.3.1C Additional requirement for UL CLTD 80g36.6.3.1D Additional requirement for UL MIMO . 80g36.6.3.1E Additional requirement for DB-DC-HSUPA 80g36.7 Transmit intermodulation . 82g36.7.1 Minimum requirement 82g36
38、.7.1A Additional requirement for DC-HSUPA. 82g36.7.1B Additional requirement for UL OLTD 82g36.7.1C Additional requirement for UL CLTD 82g36.7.1D Additional requirement for UL MIMO . 83g36.7.1E Additional requirement for DB-DC-HSUPA 83g36.8 Transmit modulation 83g36.8.1 Transmit pulse shape filter 8
39、3g36.8.1A Additional requirement for UL OLTD 83g36.8.1B Additional requirement for UL CLTD 83g36.8.1C Additional requirement for UL MIMO . 83g36.8.1D Additional requirement for DB-DC-HSUPA 83g36.8.2 Error Vector Magnitude 83g36.8.2.1 Minimum requirement 84g36.8.2.1A Additional requirement for DC-HSU
40、PA . 85g36.8.2.1B Additional requirement for UL OLTD 85g36.8.2.1C Additional requirement for UL CLTD 85g36.8.2.1D Additional requirement for UL MIMO . 85g36.8.2.1E Additional requirement for DB-DC-HSUPA 86g36.8.3 Peak code domain error 86g36.8.3.1 Minimum requirement 86g36.8.3.1A Additional requirem
41、ent for UL OLTD 86g36.8.3.1B Additional requirement for UL CLTD 86g36.8.3.1C Additional requirement for DB-DC-HSUPA operating simultaneously with CS . 86g36.8.3a Relative code domain error . 87g36.8.3a.1 Relative Code Domain Error . 87g36.8.3a.1.1 Minimum requirement. 87g36.8.3a.1.1a Additional requ
42、irement for DC-HSUPA . 88g36.8.3a.1.1b Additional requirement for UL OLTD 88g36.8.3a.1.1c Additional requirement for UL CLTD 88g36.8.3a.1.1d Additional requirement for UL MIMO 88g36.8.3a.1.1e Additional requirement for DB-DC-HSUPA 88g3ETSI ETSI TS 125 101 V15.2.0 (2018-07)63GPP TS 25.101 version 15.
43、2.0 Release 156.8.3b In-band emission for DC-HSUPA 88g36.8.3b.1 Minimum requirement for DC-HSUPA 89g36.8.4 Phase discontinuity for uplink DPCH . 89g36.8.4.1 Minimum requirement 89g36.8.4.1A Additional requirement for UL OLTD 89g36.8.4.1B Additional requirement for UL CLTD 89g36.8.4.1C Additional req
44、uirement for DB-DC-HSUPA 90g36.8.5 Phase discontinuity for HS-DPCCH . 90g36.8.5.1 Minimum requirement 90g36.8.5.1A Additional requirement for UL OLTD 90g36.8.5.1B Additional requirement for UL CLTD 90g36.8.6 Phase discontinuity for E-DCH 90g36.8.6.1 Minimum requirement 91g36.8.6.1A Additional requir
45、ement for UL OLTD 91g36.8.6.1B Additional requirement for UL CLTD 92g36.8.6.1C Additional requirement for DB-DC-HSUPA 92g36.8.7 Time alignment error for DC-HSUPA 92g36.8.7.1 Minimum requirement 92g36.8.7A Time alignment error for UL OLTD . 92g36.8.7A.1 Minimum requirement 92g36.8.7B Time alignment e
46、rror for UL CLTD . 92g36.8.7B.1 Minimum requirement 92g36.8.7C Time alignment error for UL MIMO 92g36.8.7C.1 Minimum requirement 92g36.8.7D Time alignment error for DB-DC-HSUPA . 92g36.8.7D.1 Minimum requirement 92g37 Receiver characteristics 93g37.1 General . 93g37.2 Diversity characteristics . 94g
47、37.3 Reference sensitivity level 94g37.3.1 Minimum requirement 94g37.3.2 Additional requirement for DC-HSDPA. 96g37.3.3 Additional requirement for DB-DC-HSDPA 98g37.3.4 Additional requirement for single band 4C-HSDPA 98g37.3.5 Additional requirement for dual band 4C-HSDPA . 100g37.3.6 Additional req
48、uirement for single band 8C-HSDPA 100g37.3.7 Additional requirement for single band NC-4C-HSDPA . 100g37.4 Maximum input level . 102g37.4.1 Minimum requirement for DPCH reception . 102g37.4.2 Minimum requirement for HS-PDSCH reception . 102g37.4.2.1 Minimum requirement for 16QAM . 102g37.4.2.2 Minim
49、um requirement for 64QAM . 103g37.4.3 Additional requirement for DC-HSDPA and DB-DC-HSDPA 103g37.4.3.1 Additional requirement for 16QAM 103g37.4.3.2 Additional requirement for 64QAM 104g37.4.4 Additional requirement for single band/dual band 4C-HSDPA or single band 8C-HSDPA and single band NC-4C-HSDPA 105g37.4.4.1 Additional requirement for 16QAM 105g37.4.4.2 Additional requirement for 64QAM 105g37.5 Adjacent Channel Selectivity (ACS) 106g37.5.1 Minimum requirement 106g37.5.2 Additional requirement for DC-HSDPA and DB-DC-HSDPA 106g37.5.3 Additional requirement for single band/
