1、 ETSI TS 13Universal Mobile TelTerminal coRadio transm(3GPP TS 34.12TECHNICAL SPECIFICATION134 122 V11.12.0 (201elecommunications System (conformance specification; smission and reception (TDD).122 version 11.12.0 Release 1016-02) (UMTS); D) 11) ETSI ETSI TS 134 122 V11.12.0 (2016-02)13GPP TS 34.122
2、 version 11.12.0 Release 11Reference RTS/TSGR-0534122vbc0 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N
3、7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the p
4、rior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the presen
5、t document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to
6、 one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The con
7、tent of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade
8、Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 134 122 V11.12.0 (2016-02)
9、23GPP TS 34.122 version 11.12.0 Release 11Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
10、in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Polic
11、y, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Techn
12、ical Specification (TS) has been produced by the ETSI 3rdGeneration Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding E
13、TSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to
14、 be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 134 122 V11.12.0 (2016-02)33GPP TS 34.122 version 11.12.0 Release 11Cont
15、ents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 44g31 Scope 45g32 References 45g33 Definitions, abbreviations and equations . 46g33.1 Definitions 46g33.2 Abbreviations . 47g33.3 Equations 48g34 Frequency bands and channel arrangement 48g34.1 General . 48g34.2
16、 Frequency bands . 48g34.3 TXRX frequency separation . 49g34.3.1 3,84 Mcps TDD Option 49g34.3.2 1,28 Mcps TDD Option 49g34.3.3 7,68 Mcps TDD Option 49g34.4 Channel arrangement 49g34.4.1 Channel spacing 49g34.4.1.1 3,84 Mcps TDD Option . 49g34.4.1.2 1,28 Mcps TDD Option . 49g34.4.1.3 7,68 Mcps TDD Op
17、tion . 49g34.4.2 Channel raster . 49g34.4.3 Channel number 49g34.4.4 UARFCN (3,84 Mcps TDD Option) 49g34.4.4A UARFCN (1.28 Mcps TDD Option) 50g34.4.5 UARFCN (7,68 Mcps TDD Option) 50g35 Transmitter Characteristics . 51g35.1 General . 51g35.2 User Equipment maximum output power . 51g35.2.1 Definition
18、 and applicability 51g35.2.2 Minimum Requirements . 51g35.2.2.1 3.84 Mcps TDD option . 51g35.2.2.2 1.28 Mcps TDD option . 52g35.2.2.3 7.68 Mcps TDD option . 52g35.2.3 Test purpose 53g35.2.4 Method of test . 53g35.2.4.1 Initial conditions . 53g35.2.4.1.1 3,84 Mcps TDD Option . 53g35.2.4.1.2 1,28 Mcps
19、 TDD Option . 54g35.2.4.1.3 7,68 Mcps TDD Option . 54g35.2.4.2 Procedure 55g35.2.5 Test Requirements 55g35.2.5.1 3,84 Mcps TDD Option . 55g35.2.5.2 1.28 Mcps TDD Option . 55g35.2.5.3 7.68 Mcps TDD Option . 56g35.2A User Equipment maximum output power with E-DCH 56g35.2A.1 Definition and applicabilit
20、y 56g35.2A.2 Minimum Requirements . 56g35.2A.2.1 3.84 Mcps TDD option . 56g35.2A.2.2 1.28 Mcps TDD option . 56g35.2A.2.3 7.68 Mcps TDD option . 57g35.2A.3 Test purpose 57g3ETSI ETSI TS 134 122 V11.12.0 (2016-02)43GPP TS 34.122 version 11.12.0 Release 115.2A.4 Method of test . 57g35.2A.4.1 Initial co
21、nditions . 57g35.2A.4.1.1 3,84 Mcps TDD Option . 57g35.2A.4.1.2 1,28 Mcps TDD Option . 58g35.2 A.4.1.3 7,68 Mcps TDD Option . 58g35.2A.4.2 Procedure 58g35.2A.5 Test requirements 58g35.2A.5.1 3.84 Mcps TDD Option . 58g35.2A.5.2 1.28 Mcps TDD Option . 58g35.2A.5.3 7.68 Mcps TDD Option . 59g35.2B User
22、Equipment maximum output power with HS-SICH and DPCH 59g35.2B.1 Definition and applicability 59g35.2B.2 Minimum Requirements . 59g35.2B.2.1 3.84 Mcps TDD option . 59g35.2B2.2 1.28 Mcps TDD option . 59g35.2B.2.3 7.68 Mcps TDD option . 60g35.2B.3 Test purpose 60g35.2B.4 Method of test . 60g35.2B.4.1 I
23、nitial conditions . 60g35.2B.4.2 Procedure 60g35.2B.5 Test requirements 61g35.2B.5.1 3.84 Mcps TDD Option . 61g35.2B.5.2 1.28 Mcps TDD Option . 61g35.2B.5.3 7.68 Mcps TDD Option . 61g35.3 UE frequency stability 61g35.3.1 Definition and applicability 61g35.3.2 Minimum Requirements . 61g35.3.3 Test pu
24、rpose 62g35.3.4 Method of test . 62g35.3.4.1 Initial conditions . 62g35.3.4.1.1 3,84 Mcps TDD Option . 62g35.3.4.1.2 1,28 Mcps TDD Option . 62g35.3.4.1.3 7,68 Mcps TDD Option . 62g35.3.4.2 Procedure 63g35.3.5 Test Requirements 63g35.4 Output Power Dynamics 63g35.4.1 Uplink power control 63g35.4.1.1
25、Initial accuracy (3,84 Mcps TDD Option) 63g35.4.1.1.1 Definition and applicability . 63g35.4.1.1.2 Minimum requirements . 63g35.4.1.1.3 Test purpose 63g35.4.1.1.4 Method of test 64g35.4.1.1.5 Test requirements 64g35.4.1.2 Differential accuracy, controlled input (3,84 Mcps TDD Option) 65g35.4.1.2.1 D
26、efinition and applicability . 65g35.4.1.2.2 Minimum requirements . 65g35.4.1.2.3 Test purpose 65g35.4.1.2.4 Method of test 65g35.4.1.2.5 Test requirements 66g35.4.1.2A Differential accuracy, controlled input 67g35.4.1.3 Open loop power control (1,28 Mcps TDD Option) . 67g35.4.1.3.1 Definition and ap
27、plicability . 67g35.4.1.3.2 Minimum requirements . 67g35.4.1.3.3 Test purpose 67g35.4.1.3.4 Method of test 67g35.4.1.3.5 Test requirements 68g35.4.1.4 Closed loop power control (1,28 Mcps TDD Option) . 69g35.4.1.4.1 Definition and applicability . 69g35.4.1.4.2 Minimum requirements . 69g35.4.1.4.3 Te
28、st purpose 69g35.4.1.4.4 Method of test 69g35.4.1.4.5 Test requirements 70g3ETSI ETSI TS 134 122 V11.12.0 (2016-02)53GPP TS 34.122 version 11.12.0 Release 115.4.1.5 Initial accuracy (7,68 Mcps TDD Option) 71g35.4.1.5.1 Definition and applicability . 71g35.4.1.5.2 Minimum requirements . 71g35.4.1.5.3
29、 Test purpose 71g35.4.1.5.4 Method of test 71g35.4.1.5.4.1 Initial conditions 71g35.4.1.5.4.2 Procedure . 72g35.4.1.5.5 Test requirements 72g35.4.2 Minimum output power 72g35.4.2.1 Definition and applicability . 72g35.4.2.2 Minimum Requirements 72g35.4.2.2.1 3,84Mcps TDD Option 72g35.4.2.2.2 1,28Mcp
30、s TDD Option 72g35.4.2.2.3 7,68Mcps TDD Option 73g35.4.2.3 Test purpose 73g35.4.2.4 Method of test . 73g35.4.2.4.1 Initial conditions 73g35.4.2.4.2 Procedure . 73g35.4.2.5 Test requirements 73g35.4.2.5.1 3,84 Mcps TDD Option . 73g35.4.2.5.2 1,28 Mcps TDD Option . 73g35.4.2.5.3 7,68 Mcps TDD Option .
31、 73g35.4.3 Transmit OFF power . 74g35.4.3.1 Definition and applicability . 74g35.4.3.2 Minimum Requirements 74g35.4.3.3 Test purpose 74g35.4.3.4 Method of test . 74g35.4.3.5 Test requirements 74g35.4.4 Transmit ON/OFF Time mask 74g35.4.4.1 Definition and applicability . 74g35.4.4.2 Minimum requireme
32、nts . 74g35.4.4.2.1 3,84Mcps TDD Option 74g35.4.4.2.2 1,28Mcps TDD Option 75g35.4.4.2.3 7,68Mcps TDD Option 75g35.4.4.3 Test Purpose 76g35.4.4.4 Method of test . 76g35.4.4.4.1 Initial conditions 76g35.4.4.4.2 Procedure . 76g35.4.4.5 Test requirements 76g35.4.5 Out-of-synchronisation handling of outp
33、ut power for continuous transmission . 77g35.4.5.1 Definition and applicability . 77g35.4.5.2 Minimum Requirement . 77g35.4.5.2.1 3,84 Mcps TDD Option . 77g35.4.5.2.2 1,28 Mcps TDD Option . 78g35.4.5.2.3 7,68 Mcps TDD Option . 79g35.4.5.3 Test purpose 80g35.4.5.4 Method of test . 81g35.4.5.4.1 Initi
34、al conditions 81g35.4.5.4.2 Procedure . 81g35.4.5.5 Test Requirements . 82g35.4.6 Out-of-synchronisation handling of output power for discontinuous transmission 82g35.4.6.1 Definition and applicability . 82g35.4.6.2 Minimum Requirement . 83g35.4.6.2.1 3,84 Mcps TDD Option . 83g35.4.6.2.2 1,28 Mcps T
35、DD Option . 84g35.4.6.2.3 7,68 Mcps TDD Option . 85g35.4.6.3 Test purpose 86g35.4.6.4 Method of test . 87g35.4.6.4.1 Initial conditions 87g35.4.6.4.2 Procedure . 87g35.4.6.5 Test Requirements . 88g35.5 Output RF spectrum emissions . 88g3ETSI ETSI TS 134 122 V11.12.0 (2016-02)63GPP TS 34.122 version
36、11.12.0 Release 115.5.1 Occupied bandwidth . 88g35.5.1.1 Definition and applicability . 88g35.5.1.2 Minimum Requirements 88g35.5.1.2.1 3,84Mcps TDD Option 88g35.5.1.2.2 1,28Mcps TDD Option 88g35.5.1.2.3 7,68Mcps TDD Option 89g35.5.1.3 Test purpose 89g35.5.1.4 Method of test . 89g35.5.1.4.1 Initial c
37、onditions 89g35.5.1.4.2 Procedure . 89g35.5.1.5 Test requirements 89g35.5.1.5.1 3,84 Mcps TDD Option . 89g35.5.1.5.2 1,28 Mcps TDD Option . 90g35.5.1.5.3 7,68 Mcps TDD Option . 90g35.5.2 Out of band emission 90g35.5.2.1 Spectrum emission mask . 90g35.5.2.1.1 Definition and applicability . 90g35.5.2.
38、1.1.1 3,84 Mcps TDD Option . 90g35.5.2.1.1.2 1,28 Mcps TDD Option . 90g35.5.2.1.1.3 7,68 Mcps TDD Option . 90g35.5.2.1.2 Minimum Requirements 90g35.5.2.1.2.1 3,84 Mcps TDD Option . 90g35.5.2.1.2.2 1,28 Mcps TDD Option . 91g35.5.2.1.2.3 7,68 Mcps TDD Option . 91g35.5.2.1.3 Test purpose 92g35.5.2.1.4
39、Method of test 92g35.5.2.1.5 Test requirements 93g35.5.2.1.5.1 3,84 Mcps TDD Option . 93g35.5.2.1.5.2 1,28 Mcps TDD Option . 94g35.5.2.1.5.3 7,68 Mcps TDD Option . 95g35.5.2.1A Spectrum emission mask with E-DCH 95g35.5.2.1A.1 Definition and applicability . 95g35.5.2.1A.2 Minimum Requirements 95g35.5
40、.2.1A.3 Test purpose 96g35.5.2.1A.4 Method of test 96g35.5.2.1A5 Test requirements 97g35.5.2.1B Spectrum emission mask with HS-SICH and DPCH 97g35.5.2.1B.1 Definition and applicability . 97g35.5.2.1B.2 Minimum Requirements 98g35.5.2.1B.3 Test purpose 98g35.5.2.1B.4 Method of test 98g35.5.2.1B5 Test
41、requirements 99g35.5.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 99g35.5.2.2.1 Definition and applicability . 99g35.5.2.2.2 Minimum Requirements 100g35.5.2.2.2.1 3,84Mcps TDD Option 100g35.5.2.2.2.2 1,28Mcps TDD Option 100g35.5.2.2.2.3 7,68Mcps TDD Option 100g35.5.2.2.3 Test purpose 100g35.5.2
42、.2.4 Method of test 101g35.5.2.2.5 Test requirements 101g35.5.2.2.5.1 3,84 Mcps TDD Option . 101g35.5.2.2.5.2 1,28 Mcps TDD Option . 101g35.5.2.2.5.3 7,68 Mcps TDD Option . 102g35.5.2.2A Adjacent Channel Leakage power Ratio (ACLR) with E-DCH 102g35.5.2.2A.1 Definition and applicability . 102g35.5.2.
43、2A.2 Minimum Requirements 102g35.5.2.2A.2.1 3,84Mcps TDD Option 102g35.5.2.2A.2.2 1,28Mcps TDD Option 102g35.5.2.2A.2.3 7,68Mcps TDD Option 103g35.5.2.2A.3 Test purpose 103g35.5.2.2A.4 Method of test 103g3ETSI ETSI TS 134 122 V11.12.0 (2016-02)73GPP TS 34.122 version 11.12.0 Release 115.5.2.2A.5 Tes
44、t requirements 103g35.5.2.2A.5.1 3,84 Mcps TDD Option . 103g35.5.2.2A.5.2 1,28 Mcps TDD Option . 103g35.5.2.2A.5.3 7,68 Mcps TDD Option . 104g35.5.2.2B Adjacent Channel Leakage power Ratio (ACLR) with HS-SICH and DPCH 104g35.5.2.2B.1 Definition and applicability . 104g35.5.2.2B.2 Minimum Requirement
45、s 104g35.5.2.2B.2.1 3,84Mcps TDD Option 104g35.5.2.2B.2.2 1,28Mcps TDD Option 104g35.5.2.2B.2.3 7,68Mcps TDD Option 104g35.5.2.2B.3 Test purpose 104g35.5.2.2B.4 Method of test 105g35.5.2.2B.5 Test requirements 105g35.5.2.2B.5.1 3,84 Mcps TDD Option . 105g35.5.2.2B.5.2 1,28 Mcps TDD Option . 105g35.5
46、.2.2B.5.3 7,68 Mcps TDD Option . 105g35.5.3 Spurious emissions . 105g35.5.3.1 Definition and applicability . 105g35.5.3.2 Minimum Requirements 106g35.5.3.2.1 3,84 Mcps TDD Option . 106g35.5.3.2.2 1,28Mcps TDD Option 106g35.5.3.2.3 7,68 Mcps TDD Option . 107g35.5.3.3 Test purpose 108g35.5.3.3.1 3,84
47、Mcps Option 108g35.5.3.3.2 1,28 Mcps Option 108g35.5.3.3.3 7,68 Mcps Option 108g35.5.3.4 Method of test . 108g35.5.3.4.1 Initial conditions 108g35.5.3.4.2 Procedure . 108g35.5.3.5 Test requirements 109g35.5.3.5.1 3,84 Mcps TDD Option . 109g35.5.3.5.2 1,28 Mcps TDD Option . 109g35.5.3.5.3 7,68 Mcps T
48、DD Option . 111g35.6 Transmit Intermodulation . 111g35.6.1 Definition and applicability 111g35.6.2 Minimum Requirements . 111g35.6.2.1 3,84 Mcps TDD Option . 111g35.6.2.2 1,28 Mcps TDD Option . 112g35.6.2.3 7,68 Mcps TDD Option . 112g35.6.3 Test purpose 112g35.6.4 Method of test . 112g35.6.4.1 Initi
49、al conditions . 112g35.6.4.2 Procedure 113g35.6.4.2.1 3,84 Mcps TDD Option . 113g35.6.4.2.2 1,28 Mcps TDD Option . 113g35.6.4.2.3 7,68 Mcps TDD Option . 113g35.6.5 Test requirements 113g35.6.5.1 3,84 Mcps TDD Option . 113g35.6.5.2 1,28 Mcps TDD Option . 113g35.6.5.3 7,68 Mcps TDD Option . 114g35.7 Transmit Modulation 114g35.7.1 Error Vector Magnitude 114g35.7.1.1 Definition and applicability . 114g35.7.1.2 Minimum Requirements 114g35.7.1.3 Test purpose 115g35.7.1.4 Method of test . 115g35.7.1.4.1 Initial conditions 115g35.7.1.4.2 Procedure . 115g35.7.1.5 Test requirements 11
