1、 ETSI TS 13Universal Mobile TelActive Antenna SconPart 2: radi(3GPP TS 37.14TECHNICAL SPECIFICATION137 145-2 V13.1.0 (20elecommunications System (LTE; a System (AAS) Base Station (onformance testing; diated conformance testing 145-2 version 13.1.0 Release 12017-01) (UMTS); n (BS) e 13) ETSI ETSI TS
2、137 145-2 V13.1.0 (2017-01)13GPP TS 37.145-2 version 13.1.0 Release 13Reference RTS/TSGR-0437145-2vd10 Keywords LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucrat
3、if enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the pre
4、sent document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network d
5、rive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in
6、the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as
7、authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM
8、, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Ass
9、ociation. ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)23GPP TS 37.145-2 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available
10、for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (ht
11、tps:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, ess
12、ential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interp
13、reted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not
14、“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 137 145-2 V13.1.0 (2017-
15、01)33GPP TS 37.145-2 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions, symbols and abbreviations . 8g33.1 Definitions 8g33.2 Symbols 10g33.3 Abbreviations . 12g34 General test conditions
16、and declarations 13g34.1 Measurement uncertainties and test requirements 13g34.1.1 General 13g34.1.2 Acceptable uncertainty of Test System . 13g34.1.2.1 General 13g34.1.2.2 Measurement of transmitter 13g34.1.2.3 Measurement of receiver . 13g34.1.3 Interpretation of measurement results . 14g34.2 Cond
17、ucted and radiated requirement reference points . 14g34.3 Base station classes for AAS BS 15g34.4 Regional requirements 15g34.5 Operating bands and band categories . 15g34.6 Channel arrangements 15g34.7 Requirements for AAS BS capable of multi-band operation . 15g34.8 AAS BS configurations 15g34.8.1
18、 Transmit configurations 15g34.8.2 Receive configurations . 16g34.8.3 Power supply options 16g34.8.4 BS with integrated Iuant BS modem 17g34.9 Capability sets 17g34.10 Manufacturer declarations 17g34.11 Test signal configurations for testing . 20g34.11.1 General 20g34.11.2 Test signal configurations
19、 . 21g34.11.2.1 ATCR1: UTRA multicarrier operation . 21g34.11.2.1.1 General 21g34.11.2.1.2 ATCR1a generation . 21g34.11.2.1.3 ATCR1b generation . 21g34.11.2.1.4 ATCR1 EIRP allocation 21g34.11.2.2 ANTCR1: UTRA FDD multicarrier non-contiguous operation 21g34.11.2.2.1 General 21g34.11.2.2.2 ANTCR1 gene
20、ration 21g34.11.2.2.3 ANTCR1 EIRP allocation . 22g34.11.2.3 ATCR2: E-UTRA multicarrier operation 22g34.11.2.3.1 General 22g34.11.2.3.2 ATCR2a generation . 22g34.11.2.3.3 ATCR2b generation . 22g34.11.2.3.4 ATCR2 EIRP allocation 23g34.11.2.4 ANTCR2: E-UTRA multicarrier non-contiguous operation . 23g34
21、.11.2.4.1 General 23g34.11.2.4.2 ANTCR2 generation 23g34.11.2.4.3 ANTCR2 EIRP allocation . 24g34.11.2.5 ATCR3: UTRA and E-UTRA multi RAT operation 24g3ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)43GPP TS 37.145-2 version 13.1.0 Release 134.11.2.5.1 General 24g34.11.2.5.2 ATCR3a generation . 24g34.11.2.5
22、.3 ATCR3b generation . 24g34.11.2.5.4 ATCR3 EIRP allocation 25g34.11.2.6 ANTCR3: UTRA and E-UTRA multi RAT non-contiguous operation 25g34.11.2.6.1 General 25g34.11.2.6.2 ANTCR3a generation 25g34.11.2.6.3 ANTCR3 EIRP allocation . 26g34.11.2.7 ATCR4: Single carrier for receiver tests . 26g34.11.2.7.1
23、ATCR4a generation . 26g34.11.2.7.2 ATCR4b generation . 26g34.11.2.7.3 ATCR4c generation . 26g34.11.2.7.4 ATCR4 EIRP allocation 26g34.11.2.8 Generation of MB-MSR test configurations . 26g34.11.2.8.1 ATCR5a: MB-MSR test configuration for full carrier allocation 26g34.11.2.8.2 ATCR5b: MB-MSR test confi
24、guration with high PSD per carrier 27g34.11.2.9 ATCR6: Single carrier for Transmitter tests . 28g34.11.2.9.1 ATCR6a generation . 28g34.11.2.9.2 ATCR6b generation . 28g34.11.2.9.3 ATCR6c generation . 28g34.11.2.9.4 ATCR6 EIRP allocation 28g34.12 RF channels and test models 29g34.12.1 RF channels 29g3
25、4.12.2 Test models . 29g34.13 Format and interpretation of tests . 30g34.14 Reference coordinate system 31g35 Applicability of Requirements . 32g35.1 General . 32g35.2 Test configurations for AAS BS for operating bands where MSR with more than 1 RAT is supported . 33g35.3 Test configurations for mul
26、ti-carrier capable AAS BS in operating bands where one RAT capability sets are supported 33g35.3.1 General 33g35.3.2 AAS BS supporting one RAT only MSR in the operating band . 33g35.3.3 AAS BS supporting Single-RAT UTRA in the operating band 34g35.3.4 AAS BS supporting Single-RAT E-UTRA in the opera
27、ting band 34g35.4 Test configurations for AAS BS operating bands with multi-band dependencies 35g35.4.1 AAS BS operating bands with multi-band dependencies supporting MSR operation 35g35.4.2 AAS BS operating bands with multi-band dependencies supporting Single-RAT only . 35g36 Radiated transmitter c
28、haracteristics 36g36.1 General . 36g36.2 Radiated Transmit Power . 36g36.2.1 Definition and applicability 36g36.2.2 Minimum Requirement . 36g36.2.3 Test purpose 36g36.2.4 Method of test . 37g36.2.4.1 Initial conditions . 37g36.2.4.2 Procedure 37g36.2.5 Test Requirement 37g37 Radiated receiver charac
29、teristics 38g37.1 General . 38g37.2 OTA sensitivity 38g37.2.1 Definition and applicability 38g37.2.2 Minimum Requirement . 39g37.2.3 Test Purpose 39g37.2.4 Method of test . 39g37.2.4.1 Initial conditions . 39g37.2.4.2 Procedure 39g37.2.5 Test Requirements 40g37.2.5.1 General 40g37.2.5.2 UTRA FDD Tes
30、t Requirements 40g3ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)53GPP TS 37.145-2 version 13.1.0 Release 137.2.5.3 UTRA TDD 1,28Mcp option Test Requirements . 40g37.2.5.4 E-UTRA Test Requirements . 40g3Annex A (normative): Test system characterization . 42g3Annex B (normative): Calibration 43g3Annex C (i
31、nformative): Test tolerances and derivation of test requirements . 44g3C.1 General . 44g3C.2 Measurement of transmitter (OTA) 44g3C.3 Measurement of receiver (OTA) 44g3Annex D (informative): Test system set-up 45g3D.1 Transmitter . 45g3D1.1 Radiated Transmit Power . 45g3D.2 Receiver 46g3D.2.1 OTA se
32、nsitivity 46g3Annex E (normative): Estimation of Measurement Uncertainty . 47g3E.1 General . 47g3E.2 Measurement methodology descriptions 47g3E.3 Measurement uncertainty budget format 47g3E.4 Measurement uncertainty budgets 47g3E.5 Measurement error contribution descriptions . 47g3Annex F (informati
33、ve): Change history . 48g3History 49g3ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)63GPP TS 37.145-2 version 13.1.0 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within
34、 the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for
35、 information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have
36、been incorporated in the document. ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)73GPP TS 37.145-2 version 13.1.0 Release 131 Scope The present document specifies the Radio Frequency (RF) test methods and conformance requirements for Single RAT E-UTRA, UTRA and Multi-Standard Radio (MSR) UTRA and EUTRA Ac
37、tive Antenna System (AAS) Base Station (BS). These have been derived from, and are consistent with the E-UTRA, UTRA AAS BS specification defined in 3GPP TS 25.104 2. The technical specification is in 2 parts, part 1 9 covers conducted requirements and part 2 (the present document) covers radiated re
38、quirements. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific refer
39、ence, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document
40、. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 25.104: “Base Station (BS) radio transmission and reception (FDD)“. 3 3GPP TS 25.105: “Base Station (BS) radio transmission and reception (TDD)“. 4 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (
41、BS) radio transmission and reception“. 5 3GPP TS 37.104: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) radio transmission and reception“. 6 3GPP TS 37.105: “Active Antenna System (AAS) Base Station (BS) transmission and reception“. 7 3GPP TR 37.842: “E-UTRA and UTRA; Radio
42、 Frequency (RF) requirement background for Active Antenna System (AAS) Base Station (BS)“. 8 Recommendation ITU-R M.1545: “Measurement uncertainty as it applies to test limits for the terrestrial component of International Mobile Telecommunications-2000“. 9 3GPP TS 37.145-1: “Active Antenna System (
43、AAS) Base Station (BS) conformance testing; Part 1: Conducted conformance testing“. 10 3GPP TS 25.141: “Base Station (BS) conformance testing (FDD)“. 11 3GPP TS 25.142: “Base Station (BS) conformance testing (TDD)“. 12 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Statio
44、n (BS) conformance testing“. 13 3GPP TS 37.141: “E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing“. ETSI ETSI TS 137 145-2 V13.1.0 (2017-01)83GPP TS 37.145-2 version 13.1.0 Release 133 Definitions, symbols and abbreviations 3.1 Definitions For the purposes
45、of the present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. AAS BS receiver: composite receiver function of an AAS BS receiving in an o
46、perating band active antenna system base station: base station system which combines an Antenna Array with an Active transceiver unit array and a Radio Distribution Network band category: group of operating bands for which the same MSR scenarios apply Base Station RF Bandwidth: bandwidth in which a
47、base station transmits and/or receives single or multiple carrier(s) and/or RATs simultaneously within a supported operating band NOTE: In single carrier operation, the Base Station RF Bandwidth is equal to the channel bandwidth. Base Station RF Bandwidth edge: frequency of one of the edges of the B
48、ase Station RF Bandwidth beam: main lobe of a radiation pattern from an AAS BS NOTE: For certain AAS antenna array, there may be more than one beam. beam centre direction: direction equal to the geometric centre of the -3 dB EIRP contour of the beam beam direction pair: data set consisting of the be
49、am centre direction and the related beam peak direction beam peak direction: direction where the maximum EIRP is supposed to be found beamwidth: angles describing the major and minor axes of an ellipsoid closest fit to an essentially elliptic half-power contour of a beam carrier: modulated waveform conveying the physical channels carrier aggregation: aggregation of two or more E-UTRA component carriers in order to support wider transmission bandwidths channel bandwidth: RF bandwidth supporting a single RF carrier with the transmission bandwid
