1、 ETSI TS 186 006-1 V2.1.1 (2015-10) Core Network and Interoperability Testing (INT); Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance test specification (3GPP Release 10); Part 1: Protocol
2、 Implementation Conformance Statement (PICS) TECHNICAL SPECIFICATION ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)2Reference RTS/INT-00125-1 Keywords OIP, OIR, PICS, SIP, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348
3、623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The conten
4、t of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Docume
5、nt Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/t
6、b/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, inclu
7、ding photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards I
8、nstitute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade
9、 Marks registered and owned by the GSM Association. ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions and abbre
10、viations . 6g33.1 Definitions 6g33.2 Abbreviations . 7g34 Conformance to this PICS proforma specification . 7g34.0 Introduction 7g34.1 Guidance for completing the PICS proforma . 7g34.1.1 Purposes and structure 7g34.1.2 Abbreviations and conventions . 7g34.1.3 Instructions for completing the PICS pr
11、oforma 8g34.2 Identification of the implementation 8g34.2.0 Introduction. 8g34.2.1 Date of the statement 8g34.2.2 Implementation Under Test (IUT) identification 9g34.2.3 System Under Test (SUT) identification 9g34.2.4 Product supplier 9g34.2.5 Client (if different from product supplier) 10g34.2.6 PI
12、CS contact person 10g34.3 Identification of the ETSI TS 124 607 . 10g34.4 Global statement of conformance . 11g34.5 Roles . 11g34.6 User role . 11g34.6.0 Introduction. 11g34.6.1 Major capabilities . 11g34.7 Network role . 11g34.7.0 Introduction. 11g34.7.1 Major capabilities . 12g3History 13g3ETSI ET
13、SI TS 186 006-1 V2.1.1 (2015-10)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI S
14、R 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no inves
15、tigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specif
16、ication (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 1 of a multi-part deliverable covering the Conformance Test Specification of Originating Identification Presentation (OIP) supplementary service and the Originatin
17、g Identification Restriction (OIR) supplementary services using IP Multimedia (IM) Core Network (CN) subsystem, as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Suite Structure and Test Purposes (TSS Universal Mobile Telecommunications System (UMTS);
18、 LTE; Originating Identification Presentation (OIP) and Originating Identification Restriction (OIR) using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.607 Release 10)“. 2 ETSI ETS 300 406 (10-1995): “Methods for testing and Specification (MTS); Protocol and pro
19、file conformance testing specifications; Standardization methodology“. 3 ISO/IEC 9646-1: “Information technology - Open systems interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-7: “Information technology - Open systems interconnection - Conf
20、ormance testing methodology and framework - Part 7: Implementation Conformance Statements“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies.
21、For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary
22、 for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI TS 124 607 1, ISO/IEC 9646-1 3, ISO/IEC 96
23、46-7 4 and the following apply: ICS proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICS Implementation Conformance Statement (ICS): A statement made by the supplier of an implementation or system claimed to conform to a given specif
24、ication, stating which capabilities have been implemented. The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc. Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification NOTE: This may contai
25、n additional information. ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)73.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 124 607 1 and the following apply: CLIR Calling Line Identification Restriction ICS Implementation Conformance Statement IUT Implementation
26、 Under Test OIP Originating Identification Presentation OIR Originating Identification Restriction PICS Protocol ICS SUT System Under Test 4 Conformance to this PICS proforma specification 4.0 Introduction If it claims to conform to the present document, the actual PICS proforma to be filled in by a
27、 supplier shall be technically equivalent to the text of the PICS proforma given in clause 4, and shall preserve the numbering/naming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the guidance for co
28、mpletion given in clause 4.1. 4.1 Guidance for completing the PICS proforma 4.1.1 Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in ETSI TS 124 607 1 may provide information about the implementati
29、on in a standardized manner. The PICS proforma is subdivided into clauses for the following categories of information: guidance for completing the PICS proforma; identification of the implementation; identification of the ; global statement of conformance; roles; user role: - major capabilities; - n
30、etwork role: - major capabilities. 4.1.2 Abbreviations and conventions The PICS proforma contained in this clause is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in th
31、e table. ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)8Item description column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-
32、7 4, are used for the status column: m mandatory - the capability is required to be supported. o optional - the capability may be supported or not. n/a not applicable - in the given context, it is impossible to use the capability. Reference column The reference column makes reference to ETSI TS 124
33、607 1, except where explicitly stated otherwise. Support column The support column shall be filled in by the supplier of the implementation. The following common notations, defined in ISO/IEC 9646-7 4, are used for the support column: Y or y supported by the implementation. N or n not supported by t
34、he implementation. N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation of a conditional status). Prerequisite line A prerequisite line takes the form: Prerequisite: . A prerequisite line after a clause or table title indicates that the whole clause or th
35、e whole table is not required to be completed if the predicate is FALSE. 4.1.3 Instructions for completing the PICS proforma The supplier of the implementation shall complete the PICS proforma in each of the spaces provided. In particular, an explicit answer shall be entered, in each of the support
36、column boxes provided, using the notation described in clause 4.1.2. However, the tables containing in “user role“ clause shall only be completed for user implementations, and the tables containing in “network role“ clause shall only be completed for network implementations. If necessary, the suppli
37、er may provide additional comments in space at the bottom of the tables or separately. More detailed instructions are given at the beginning of the different clauses of the PICS proforma. 4.2 Identification of the implementation 4.2.0 Introduction Identification of the Implementation Under Test (IUT
38、) and the system in which it resides (the System Under Test (SUT) should be filled in so as to provide as much detail as possible regarding version numbers and configuration options. The product supplier information and client information should both be filled in if they are different. A person who
39、can answer queries regarding information supplied in the ICS should be named as the contact person. 4.2.1 Date of the statement . ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)94.2.2 Implementation Under Test (IUT) identification IUT name: . . IUT version: . 4.2.3 System Under Test (SUT) identification SUT
40、 name: . . Hardware configuration: . . . Operating system: . 4.2.4 Product supplier Name: . Address: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)104.2.5 Client (if different from product supplier) Name: . Addres
41、s: . . . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . 4.2.6 PICS contact person (A person to contact if there are any queries concerning the content of the ICS) Name: . Telephone number: . Facsimile number: . E-mail address: . Additional information: . . . 4.
42、3 Identification of the ETSI TS 124 607 This PICS proforma applies to ETSI TS 124 607 1. ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)114.4 Global statement of conformance Are all mandatory capabilities implemented? (Yes/No) . NOTE: Answering “No“ to this question indicates non-conformance to the specific
43、ation. Non-supported mandatory capabilities are to be identified in the PICS, with an explanation of why the implementation is non-conforming, on pages attached to the PICS proforma. 4.5 Roles Table 4.1: Roles Item Item description Reference Status Support 1 User 4.5.2.1, 4.5.2.12/1 o.1 2 Network 4.
44、5.2.4, 4.5.2.9/1 o.1 o.1: It is mandatory to support exactly one of these items. Comments: . 4.6 User role 4.6.0 Introduction This clause contains the PICS proforma tables related to the user role. They need to be completed only for user implementations: Prerequisite: 4.1/1 - user role 4.6.1 Major c
45、apabilities Table 4.2: User related requirements and options Item Item description Reference Status Support 1 Is the implementation an originating user equipment? 4.5.2.1/1 o 2 Does the originating user equipment inserts P-Preferred-Identity header field? 4.5.2.1/1 o 3 Is the terminating user a term
46、inating user equipment? 4.5.2.12/1 o Comments: . 4.7 Network role 4.7.0 Introduction This clause contains the PICS proforma tables related to the Network role. They need to be completed only for network implementations: Prerequisite: 4.1/2 - network role ETSI ETSI TS 186 006-1 V2.1.1 (2015-10)124.7.
47、1 Major capabilities Table 4.3: Network related requirements and options Item Item description Reference Status Support 1 Does the Application Server serving the originating user modify the From header field to remove the identification information or set the Privacy header value to “user“ if the or
48、iginating user identity is restricted? 4.5.2.4/1 o 2 Does the Application Server serving the originating user set the From header field to the default public user identities if the received From header field does not match with one of the registered public user identities? 4.5.2.4/1 o 3 Does the ori
49、ginating user subscribe the “no screening“ special arrangement? 4.5.2.4/1 o 4 Does the SUT supports the OIR service in permanent mode? 4.5.2.4/1 o 5 Does the SUT supports the OIR service in temporary mode? 4.5.2.4/1 o 6 Does the Application Server serving the terminating user anonymize the contents of the From header by setting it to a default non significant value if the terminating user does not subscribe the OIR service? 4.5.2.9/1 o 7 Does the network serving the terminating user support the override cat
