1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2000 09 29 Revised Updated A. Cockman 1978 09 13 CAHI - RD572066 - 92 Metricated and retyped 1978 06 02 CZH1 - PR - 901022 - 1 Released Printed copies are uncontrolled Page 1 of 2 Copyright 2000, Ford Global
2、 Technologies, Inc. FABRIC, NYLON - NONWOVEN - 0.5 oz/yd2 (17 g/m2) ESB-M9H97-A 1. SCOPE The material defined by this specification is a nonwoven, spun - bonded nylon fabric of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as a rein
3、forcement, which is needled between two layers of reclaimed fiber padding, to create a dual density carpet underlayment pad for 1979 Mustang models. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. 3.1 QUALITY SYSTEM REQUIREMENTS Material sup
4、pliers and part producers must conform to the Companys Quality System Requirements. 3.2 COMPOSITION 100% Nylon 66 (ASTM D 629) 3.3 WEIGHT, range 0.4 - 0.6 oz/yd 2 (14 - 20 g/m 2 ) (FLTM BN 6 - 1) 3.4 BREAKING STRENGTH, min (ASTM D 1682, Grab Method, Average of 5 Tests) MD 10 lb (44 N) AMD 5 lb (22 N
5、) 3.5 TEAR STRENGTH (Trapezoid), min (FLTM BN 22 - 1, Average of 5 Tests) MD 5 lb (22 N) AMD 3 lb ( 13 N) ENGINEERING MATERIAL SPECIFICATION ESB-M9H97-A Page 2 of 2 Copyright 2000, Ford Global Technologies, Inc. 3.6 FLAMMABILITY, max 4 in (101 mm)/min (FLTM BN 24 - 2, without the lot sampling plan)
6、In addition, the test specimen shall not exhibit any flashing or sudden flaming on either surface in excess of the above maximum value. 3.7 SUPPLIERS RESPONSIBILITY All materials supplied to this specification must be equivalent in all characteristics to the material upon which approval was original
7、ly granted. Prior to making any changes to the material originally approved under this specification, wheth er or not such changes affect the materials ability to meet the specification requirements, the Supplier shall notify the affected Purchasing, and Materials Engineering activities (with reason
8、s) of the proposed changes. Upon notification of the Company, further instructions will be provided. Note: Suppliers should be prepared to provide test data and samples demonstrating compliance to this specification, if requested. Substance restrictions imposed by regulations or Company direction ap
9、plies to the m aterials addressed by this document. The restrictions are identified in Restricted Substance Management Standard WSS - M99P9999 - A1. 4. APPROVAL OF MATERIALS Materials defined by this specification for direct supply to the Company must have prior approval. Certain materials subcontra
10、cted by part suppliers may also require prior approval. These include materials critical to the Companys business for regulatory, safety, environmental or compatibility requirements or contractual agreements. Suppliers desir ing approval of their materials shall first obtain an expression of interes
11、t from Purchasing, Design or Materials Engineering activity. Upon request, the Supplier shall submit a completed copy of their laboratory test reports, signed by a qualified and au thorized representative of the test facility, demonstrating full compliance with all the requirements of this specification. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of th is specification. Thickness 0.003 in (76 m)
