1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2009 11 17 N-STATUS No known use. No replacement named D. DiGregorio, NA 2004 03 02 Revised Para 3.0 inserted; paras 3.7, 4 deleted 1965 07 09 Released CNT3-PR401949 Printed copies are uncontrolled Copyright 2009, Ford Global Technologies, LLC
2、 Page 1 of 1 ADDITIVE - DIESEL FUEL ESE-M99C58-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is an ashless multi-functional fuel additive. 2. APPLICATION This specification was released originally for materials when injected into or blended with factory fill die
3、sel fuel at time of final assembly, is generally used to impart storage and oxidation stability, rust inhibition and dispersancy. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production
4、 Materials (WSS-M99P1111-A). 3.1 SPECIFIC GRAVITY 0.94 - 0.96 (ASTM D 1298) 3.2 VISCOSITY, at 37.8 C 36.4 - 47.2 cSt (mm2/s) (ASTM D 445 & D 446) 3.3 VISCOSITY, at 98.9 C 4.2 - 7.2 cSt (mm2/s) (ASTM D 445 & D 446) 3.4 FLASH POINT 44 - 48 C (ASTM D 1310) 3.5 TOTAL BASE NUMBER 82 - 88 (ASTM D 664) 3.6 NITROGEN 5.25 - 5.75% 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 One (1) ASTM BBL = 42 U.S. gal = 34.97 IMP. Gal (158.97 l) 5.2 One (1) U.S. liquid measure barrel = 31.5 U.S. gal (119.23 l)
