1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions Rev 1 2010 12 16 Revised See summary of revisions L. Sinclair, NA 2010 03 09 Activated L. Sinclair, NA Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 1 of 2 THREAD, NYLON, SERGING, BULKED TEXTURED WSB-M15H64
2、A 1. SCOPE The material defined by this specification is a soft bulked, textured continuous filament nylon thread. 2. APPLICATION This specification was released originally for material used as serge binding for throw-in floor mats. 3. REQUIREMENTS In addition to the requirements listed herein, thi
3、s material must meet the requirements of the Serge and Embroidery Thread Performance Specification for Floor Mats WSS-M8P22-A. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99
4、P1111-A). 3.2 APPEARANCE (FLTM BI 109-01) The color, pattern, and finish shall match the originally approved Design Center master sample, or shall be as specified on the Engineering Drawing. 3.3 COMPOSITION 3.3.1 Fiber Type Report* (ASTM D1244) 3.3.2 Yarn Number (tex) Report* (ASTM D1244) 3.3.3 Turn
5、s of Twist (tpm) Report* (ASTM D1244) 3.3.4 Twist Type Report* (ASTM D1244) 3.3.5 Number of Plies Report* (ASTM D1244) 3.3.6 Twist Balance Must not twist on itself (ASTM D204-02 section 28-33) more than two times Report values will be noted on the Approved Source Listing (ASL) for the specific mater
6、ial / supplier approval. ENGINEERING MATERIAL SPECIFICATIONWSB-M15H64-A Printed copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 2 4. SUMMARY OF REVISIONS 2010 12 16 - Removed Tex 300 in title - Replaced performance specification WSS-M8P5-C with WSS-M8P22-A. - Removed previous section 3.3 yarn construction and description - Added new section 3.3 composition and associated subsections. - Removed section 3.4 Physical Requirements.
