FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

上传人:赵齐羽 文档编号:750700 上传时间:2019-01-14 格式:PDF 页数:4 大小:36.01KB
下载 相关 举报
FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC)  与标准FORD WS.pdf_第1页
第1页 / 共4页
FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC)  与标准FORD WS.pdf_第2页
第2页 / 共4页
FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC)  与标准FORD WS.pdf_第3页
第3页 / 共4页
FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC)  与标准FORD WS.pdf_第4页
第4页 / 共4页
亲,该文档总共4页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2007 05 11 Revised Revised paragraph 3.5.1 M. Mehandru 2005 11 17 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.7, 3.8 & 4 1992 04 01 Added A5 to A7 EP00E10176266000 L. Rodigas Printed copies are uncontrolled Copyright 2007, Ford Global Techn

2、ologies, LLC Page 1 of 4 POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A1 80 A HARDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A2 85 A HARDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A3 90 A HARDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A4 95 A HA

3、RDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A5 75 A HARDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A6 65 A HARDNESS, EXTERIOR POLYVINYL CHLORIDE (PVC), FLEXIBLE WSK-M4D689-A7 60 A HARDNESS, EXTERIOR 1. SCOPE The materials defined by these specifications are flexi

4、ble polyvinyl chloride injection and/or extrusion molding compound. 2. APPLICATION These specifications were released originally for materials used for exterior garnish moldings. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to

5、the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.4 MOLDED TEST SPECIMEN 3.4.1 Preparation of Test Specimens Unless otherwise specified, all test shall be conducted on specimens die cut from ungrained compression molded plaques 150 x 150 x 2.0 +/- 0.2 mm molded accordin

6、g to ISO 293. 3.4.2 Density, g/cm3, max (ISO 1183, Method A/ASTM D 792, Method A) A1 A2 A3 A4 A5 A6 A7 1.35 1.40 1.45 1.45 1.35 1.35 1.35 ENGINEERING MATERIAL SPECIFICATIONWSK-M4D689-A1/A2/A3/A4/A5/A6/A7 Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 2 of 4 3.4.3

7、Hardness, Durometer A (ISO 868/ASTM D 2240, 6 mm thick plied-up specimens, 15 s delay) A1 A2 A3 A4 A5 A6 A7 80 +/- 5 85 +/- 5 90 +/- 5 95 +3/-5 75 +/- 5 65 +/- 5 60 +/- 5 3.4.4 Tensile Strength at Break, MPa, min (ISO R 527, type 2/ASTM D 638M, type M-II, 500 mm/min test speed) A1 A2 A3 A4 A5 A6 A7

8、12 14 15 16 11 10 10 3.4.4.1 Elongation at Break, %, min (Test Method according to para 3.4.4) A1 A2 A3 A4 A5 A6 A7 220 180 160 150 240 250 250 3.4.5 Tear Strength, kN/m, min (ISO 34, Method B, Procedure a/ASTM D 624, Die C) A1 A2 A3 A4 A5 A6 A7 50 55 60 70 40 30 25 3.4.6 Cold Flexibility at -30 C (

9、A1 - A7) No cracks (FLTM BN 102-01, except specimen 25 x 150 mm, minimum and 19-20 mm mandrel) 3.4.7 Color Stability (A1 - A7) (ISO 188/ASTM D 573, 150 +/- 50 air changes/h, 168 h at 80 +/- 2 C) After exposure the material shall not exhibit color change in excess of AATCC rating 4 (AATCC Gray Scale

10、for Evaluating Change in Color, 10 step). In addition there shall be not be any staining, spewing, loss of gloss. 3.4.8 Heat Aging Performance (A1 - A7) (ISO 188/ASTM D 573, 150 +/- 50 air changes/h, 1000 h at 80 +/- 2 C. Unaged property values shall be determined at the time of the aged properties

11、determination) 3.4.8.1 Tensile Strength Change +/- 25% (Test Method per para 3.4.4) 3.4.8.2 Elongation Change +/- 25% (Test Method per para 3.4.4) 3.4.8.3 Weight Change, max 10% (50 x 25 x 2 +/- 0.2 mm specimen) 3.4.9 H2S Staining (A1 - A7) Rating 5 (FLTM AN 102-01) ENGINEERING MATERIAL SPECIFICATIO

12、NWSK-M4D689-A1/A2/A3/A4/A5/A6/A7 Printed copies are uncontrolled Copyright 2007, Ford Global Technologies, LLC Page 3 of 4 3.4.10 Paint Staining (A1 - A7) (FLTM BP 153-01, Procedure A, 25 x 50 x 2.0 +/- 0.2 mm specimen) No visible stain or change in surface appearance produced on the painted panel b

13、eyond the boundaries of the test specimen. Note: The raised welting of the painted surfaces in direct contact with the test specimen resulting from this test method is characteristic of plasticized vinyl compounds and shall not be cause for rejection. 3.5 WEATHERING RESISTANCE (A1 - A7) After exposu

14、re in accordance with 3.5.1, 3.5.2 and 3.5.3 the material shall show no color change in excess of specified Grey Scale rating (AATCC Evaluation Procedure 1/ISO 105-A02). In addition, there shall be no cracking, crazing or other deterioration. Specimen bent around 25 mm diameter mandrel shall not sho

15、w any cracks when examined in bent condition. Material shall not exhibit mildew growth and shall not exhibit mildew growth and/or staining after exposure according to 3.5.2. A slight loss of gloss or chalking will be allowed provided an acceptable appearance can be achieved by polishing with Ford ca

16、r polish (auto wax) at permission of the affected Product Development Materials Activity. All initial approvals will be based on the preliminary Weatherometer exposure, pending Florida exposure results for final approval. 3.5.1 Xenon Arc Weatherometer Rating 4 (SAE J 2527 modified Type “S“ borosilic

17、ate inner and outer filters, 0.55 W/m2radiant exposure 3000 h exposure, specimen size: 100 - 150 mm in length) 3.5.2 12 months Florida and Arizona Rating 4 (FLTM BI 160-01, 5 south direct weathering inland, specimen size: 150 x 100 mm minimum, 2.0 +/- 0.2 mm thick, molded in smooth polished mold) 3.

18、5.3 24 months Florida and Arizona Rating 3-4 (FLTM BI 160-01, 5 south, direct weathering inland, specimen size: 150 x 100 mm minimum, 2.0 +/- 0.2 mm thick, molded in smooth polished mold) ENGINEERING MATERIAL SPECIFICATIONWSK-M4D689-A1/A2/A3/A4/A5/A6/A7 Printed copies are uncontrolled Copyright 2007

19、, Ford Global Technologies, LLC Page 4 of 4 3.6 ROAD ASPHALT STAIN RESISTANCE (WSK-M4D689-A3 Only) (NAAO Applications only) DE, max 1.5 Test Method: Prepare a solution of 50% asphalt cement and 50% unleaded gasoline. Dip the test specimen in the solution for 10 s. Suspend for 15 minutes allowing the

20、 solution to drain/evaporate, then thoroughly clean with naphtha solvent. Use an untested portion of the part as the master color. Before and after staining, measure the color of each sample per SAE J1545, CIELAB color space, 10 deg observer, illuminant D65, specular included. A part that fails this test must be coated with an appropriate clear coating and retested. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of these specifications. 5.1 RECYCLING CODE PVC

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1