FORD WSS-M11P45-A1-1989 ADHESIVE THREAD LOCKING - MICRO ENCAPSULATED《螺纹锁固粘合剂 微囊密封》.pdf

上传人:inwarn120 文档编号:751205 上传时间:2019-01-14 格式:PDF 页数:2 大小:13.86KB
下载 相关 举报
FORD WSS-M11P45-A1-1989 ADHESIVE THREAD LOCKING - MICRO ENCAPSULATED《螺纹锁固粘合剂 微囊密封》.pdf_第1页
第1页 / 共2页
FORD WSS-M11P45-A1-1989 ADHESIVE THREAD LOCKING - MICRO ENCAPSULATED《螺纹锁固粘合剂 微囊密封》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONMaterial Name Specification NumberDate Release No. Release/Revision1989 10 31 SM/ER2524TC Released J. Lines EAO FastenersA. Cockman E. Staff FastenersWP 3948-a Page 1 of 2 ADHESIVE -THREAD LOCKING, MICRO ENCAPSULATED WSS-M11P45-A11. SCOPEThis specification defines

2、the performance requirements for thread lockingadhesives which are applied to threaded parts.2. APPLICATIONThis s pecification was originally released for bolts, screws where threadlocking is required.3. REQUIREMENTS3.1 STATISTICAL PROCESSSupplie rs must conform to the requirements of Ford Quality S

3、ystemSt andard Q-101. A mutually acceptable Control Plan as describedthere in is required for materials/source approval. Appropriatestatist ical tools must be used to analyse process/product data sothat variation in the final product is continuously reduced.3.2 APPLICATION OF THE ADHESIVEParts will

4、be received in a coated condition. T he responsibility forapplication of the adhesive and method of application shall be thatof the parts supplier.3.3 PERFORMANCE REQUIREMENTS(WSPM WX200)The coatings when applied to ISO metric coarse threaded bolts,screws, shall ensure that the Thread Locking per fo

5、rmance requirementsconform to the Worldwide Standard Parts Manual specification WX200.The Thread Locking tests shall be carried out as specified in WX2003.4 CORROSION RESISTANCECo rrosion test requirements defined in the protective finishspe cifications shall apply after application of the thread lo

6、ckingadhesive.ENGINEERING MATERIAL SPECIFICATIONWSS-M11P45-A1WP 3948-b Page 2 of 2 3.5 SUPPLIERS RESPONSIBILITYAll materials supplied to this specification must be equivalent inal l characteristics to the material upon which approval wasoriginally granted.Pri or to making any change in the propertie

7、s, composition,const ruction, colour, processing or labelling of the materialorig inally approved under this specification, whether or not suchchange s affect the materials ability to meet the specificationrequir ements, the Supplier shall notify Purchasing, Toxicology andthe affected Materials Engi

8、neering activity of the proposed changesand obtain the written approval of the Materials Engineeringactivity. Test data, t est samples and a new code identification areto be submitted with the request.Substance restrictions imposed by law, regulations or Ford, apply tothe materials addressed by this

9、 document. The restrictions aredefined in Engineering Material Specification WS S-M99P9999-A1, unlessa dif ferent suffix (e.g. A2 or A3) is specified on the engineeringdocument for the application.4. APPROVAL OF MATERIALSMat erials defined by this specification must have prior approval by theresp on

10、sible Materials Engineering activity. Suppliers desiring approvalof thei r materials shall first obtain an expression of interest from theaffect ed Purchasing, Design and Materials Engineering activity. Uponrequest, the Supplier shall submit to the affected Materials Engineeringactivity its own laboratory rep ort to the specification (test results, notnominal values), the material designation and code number, and testspecim ens for Ford evaluation. Upon approval, the material will be addedto the Engineering Material Approved Source List.

展开阅读全文
相关资源
猜你喜欢
  • EN 16507-2014 en Railway applications - Ground based service - Diesel refuelling equipment《铁路应用 地面服务 柴油加料设备》.pdf EN 16507-2014 en Railway applications - Ground based service - Diesel refuelling equipment《铁路应用 地面服务 柴油加料设备》.pdf
  • EN 16508-2015 en Temporary works equipment - Encapsulation constructions - Performance requirements and general design《临时工程设备 封装结构 性能要求和一般设计》.pdf EN 16508-2015 en Temporary works equipment - Encapsulation constructions - Performance requirements and general design《临时工程设备 封装结构 性能要求和一般设计》.pdf
  • EN 16509-2014 en Transportable gas cylinders - Non-refillable small transportable steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases .pdf EN 16509-2014 en Transportable gas cylinders - Non-refillable small transportable steel cylinders of capacities up to and including 120 ml containing compressed or liquefied gases .pdf
  • EN 16511-2014 en Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer《平铺板 半钢性多层模块楼面覆盖(MMF)涂有耐磨性涂层的平板》.pdf EN 16511-2014 en Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer《平铺板 半钢性多层模块楼面覆盖(MMF)涂有耐磨性涂层的平板》.pdf
  • EN 16515-2015 en Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritage《文化遗产的保护 使用于文化遗产中的天然石材特性的指南》.pdf EN 16515-2015 en Conservation of Cultural Heritage - Guidelines to characterize natural stone used in cultural heritage《文化遗产的保护 使用于文化遗产中的天然石材特性的指南》.pdf
  • EN 16516-2017 en Construction products Assessment of release of dangerous substances - Determination of emissions into indoor air.pdf EN 16516-2017 en Construction products Assessment of release of dangerous substances - Determination of emissions into indoor air.pdf
  • EN 16521-2014 en Cosmetics - Analytical methods - GC MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection《化妆品 分析法 用气相色谱 质谱.pdf EN 16521-2014 en Cosmetics - Analytical methods - GC MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection《化妆品 分析法 用气相色谱 质谱.pdf
  • EN 16522-2014 en Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for breather devices《运输危险物品的槽罐 槽罐的服务设备 呼吸设备中的灭火器》.pdf EN 16522-2014 en Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for breather devices《运输危险物品的槽罐 槽罐的服务设备 呼吸设备中的灭火器》.pdf
  • EN 16523-1-2015 en Determination of material resistance to permeation by chemicals - Part 1 Permeation by liquid chemical under conditions of continuous contact《材料对化学渗透的抵抗性的判定 第1部分.pdf EN 16523-1-2015 en Determination of material resistance to permeation by chemicals - Part 1 Permeation by liquid chemical under conditions of continuous contact《材料对化学渗透的抵抗性的判定 第1部分.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1