1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev. 1 2016 04 27 N Status No longer used D. Murtonen, NA 2009 02 26 Activated M. Montgomery, FOE Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, MINUTE PATTERN, WOVEN DOBBY, WSS-M1H1034-A UNLAMINATED NOT TO BE USED FOR NEW
2、DESIGN 1. SCOPE The material defined by this specification is a woven jacquard polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the 2007 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein,
3、the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric C
4、ount, +/- 10% tolerance (ASTM D 3775) Warp 275 ends/10 cm Weft 180 picks/10 cm 3.2.2 Fabric Weight, +/- 15% tolerance (FLTM BN 106-01) 320 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244)(yarn count 10% tolerance) Warp 620dtexf141 (air-texturised, round Sem
5、i-dull) Weft 620dtex f144 (air-texturised, round dull) 540dtexf144 (air-texturised, triangular, bright) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1034-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERA
6、TIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
