1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 05 N Status No longer used D. Murtonen, NA 2006 05 22 Activated M. Dumitrescu Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TECH LINES PATTERN, KNIT WSS-M1H1092-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material
2、 defined by this specification is a TECH LINES PATTERN, 4 bars, 28 Gauge, TRICOT knit, body cloth of good quality and uniform composition. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for 2007 CD338 seat insert. 3. REQUIREMENTS Material speci
3、fication requirements are to be used for initial qualification of materials. In addition, to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform
4、to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3887) Wales 130 wales/10 cm Courses 250 courses/10 cm 3.2.2 Fabric Weight, range, g/m2 (FLTM BN 106-01) Laminated * Face w/no Backcoat 411 454 300 335
5、 * 3 mm foam thickness 3.3 COMPOSITION (ASTM D 629) Tolerance as specified in WSS-M8P18-A1/A4 Fabric 100% Polyester ENGINEERING MATERIAL SPECIFICATION WSS-M1H1092-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 11.1 tex (natural polyester) (B) 11.1 tex (solution dye polyester) Middle 11.1 tex (solution dye polyester) Back 11.1 tex (natural polyester) 3.5 METHOD OF DYEING Piece Dye and /or solution 3.6 FINISHING OPERATIONS Wash, preset, dye, scutch, heatset, inspect,
