1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions 2016 05 12 N Status No replacement named D. Murtonen, NA 2007 11 21 Activated L. Neves Copyright 2016, Ford Global Technologies, LLC Page 1 of 2 FABRIC, ROSARIO PATTERN, WOVEN WSS-M1H1119-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material
2、defined by this specification is a woven polyester fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric (seats) for Ranger 2009 Model Year. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements
3、of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements for Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Wa
4、rp 27.0 yarn/cm Fill 19.5 yarn/cm 3.2.2 Fabric Weight, +/- 5% tolerance (FLTM BN 106-01) Seat (laminated to 5 mm foam) 168 g/m 3.3 COMPOSITION (ASTM D 629) Fabric 100% Polyester Foam - Seat PUR/Polyether D28 5 mm Backing Fabric (Seats only) 100% PES 47 g/m ENGINEERING MATERIAL SPECIFICATION WSS-M1H1
5、119-A Copyright 2016, Ford Global Technologies, LLC Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 600 dtex, f144, Semi dull, Round, Air Textured, Polyester Fill 330 dtex, f 68, Semi dull, Round, False twist Textured, Polyester 2.7 Nm, Semi dull, Round, Flock Yarn, Polyester 3.5 METHOD OF DYEI
6、NG Warp Yarn Dyed Fill Yarn/Solution Dyed 3.6 FINISHING OPERATIONS Heat set, lamination 3.7 THICKNESS, mm, range (ASTM D 1777) Seat (laminated to 5 mm foam + backing fabric) 4.5 - 5.5 mm 3.8 TRIMMABILITY PROPERTIES 3.8.1 Stretch, laminated, %, range (SAE J855) Warp 4.5 6.5 Fill 6.5 9.0 3.9 FLAMMABIL
7、ITY (ISO 3795/SAE J369) Burn Rate, max 100 mm/minute 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that material defined in this specification and shipped to anyone assembly plant will be produced by one supplier only.
