1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 0 2014 07 02 Released M. Montgomery, EU Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 FABRIC, TETRA EMBOSSED PATTERN , WARP KNIT, WSS-M1H1179-A1 UNLAMINATED 1. SCOPE The material defined is a wa
2、rp knit polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for C344 MCA 2015.75 seat insert. The fabric was originally approved plate embossed on trilaminated with foam and backing fabric/scrim 3. REQUIREMENTS In addition to
3、the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4 as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Materi
4、als with recycled content as defined by WRS-M99P42-A2 (Textile Materials, Identification of Recycled Content ) should be used whenever technically feasible. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, -5 /+10 % tolerance (ASTM D 3775) Wales 130 / 10 cm Courses 240 / 10 cm 3.2.2 Fabric Weight, -5 / +
5、10 % tolerance (FLTM BN 106-01) 260 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Face (A) 78 Dtex f36 (polyester false twist, texturized) Face (B) 76 Dtex f24 (polyester flat yarn) ENGINEERING MATERIAL SPECIFICATION WSS-M1H1179-A1 Copyright 2014, Ford G
6、lobal Technologies, LLC Page 2 of 2 76 Dtex f24 (polyester flat yarn) 3.5 METHOD OF DYEING Solution Dyed or as approved By Material Engineering 3.6 FINISHED OPERATIONS Washing, Drying, Framing Flame lamination Plate embossed Or as approved by Materials Engineering 4. GENERAL INFORMATION The informat
7、ion given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase departments will ensure that the material defined in this specification and shipped to any one assembly
8、plant will be produced by one supplier only. 4.2 If yarn is locally sourced it must meet the above fabric construction, composition and Yarn construction. The fabric must also meet the requirements of WSS-M8P18-A1/A2/A3/A4. Fabric must be approved by Design to the original master 4.3 Global strategy for this fabric is to use Tri-Laminate / foam & scrim construction in all regions.
