1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisons Rev. 0 2011 11 02 Activated Replaces ESB-M1H294-A M. Dumitrescu, NA Controlled document at www.MATS Copyright 2011, Ford Global Technologies, Inc. Page 1 of 2 FABRIC, DANE PATTERN, WOVEN WSS-M1H294-B1 1. SCOPE The material defined by this spec
2、ification is a flat woven fabric, backcoated, 2. APPLICATION This specification was released originally for material used as an interior trim fabric for Mustang convertible top headliner. The fabric is backcoated and laminated. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Mater
3、ial suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). Materials manufactured to this Specification shall also meet the requirements contained in WSS-M15P27-F. 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric count, +/- 5 % tolerance (ASTM
4、D 3887) Warp 354 ends/10 cm Welf 252 picks/10 cm 3.2.2 Fabric Weight, +/- 15 % tolerance (FLTM BN 106-01) Face fabric 200 g/m2 Backcoat 70 g/m2 Total 270 g/m2 3.3 COMPOSITION (ASTM D 629) Fabric 100 % polyester Backcoating 100 % acrylic ENGINEERING MATERIAL SPECIFICATION WSS-M1H294-B1 Copyright 2011
5、 Ford Global Technologies, Inc. Page 2 of 2 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp 166dtex (semi-dull textured polyester) Welf 166dtex (semi-dull textured polyester) x2 3.5 METHOD OF DYEING Piece dye or as approved by Materials Engineering 3.6 FINISHED OPERATIONS Setmake, wash, dye, scotch, dry,
6、nap, shear, tenter coat 4. GENERAL INFORMATION This information given below is provided for clarification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 Purchase department will ensure that material defined in this specification and shipped to any one assembly plant will be produced by one supplier only.
