GOST 14769-1969 Butterfly actuating devices SSI Types and main parameters《ГСП闸板式的执行装置 型式和基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

FORD WSS-M4D891-A3-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND HIGH IMPACT AND HIGHER FLOW TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击且更高流动性的聚亚苯基乙醚+聚酰胺混合物(P.pdf

FORD WSS-M4D906-B1-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND MEDIUM HEAT RESISTANT INTERIOR PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D906-B2-2012 ACRYLONITRILE BUTADIENE STYRENE (ABS) EXTRUSION MOLDING COMPOUND MEDIUM HEAT RESISTANT EXTERIOR PAINTED APPLICATIONS ONLY TO BE USED WITH FORD WSS-M99P1111.pdf

FORD WSS-M4D908-A2-2006 ACRYLONITRILE BUTADIENE STYRENE (ABS) HEAT RESISTANT POST CONSUMER RECYCLATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D908-A)《.pdf

FORD WSS-M4D911-B-2011 POLYPROPYLENE (PP) COPOLYMER HIGH IMPACT 100% RECYCLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击100%回收的聚丙烯(PP)共聚物模塑材料 与福特WSS-M99P1111-A 一.pdf

FORD WSS-M4D924-B1-2015 POLYCARBONATE ACRYLONITRILE BUTADIENE STYRENE BLEND (PC+ABS) MEDIUM IMPACT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D924-B2-2016 POLYCARBONATE ACRYLONITRILE BUTADIENE POLYCARBONATE ACRYLONITRILE BUTADIENE MOLDING COMPOUND INTERIOR ANTI-SQUEAK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D926-A2-2010 POLYCARBONATE (PC) IMPACT MODIFIED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良25%最低回收成分的聚碳酸酯(PC)模塑材料 与福特WSS-M.pdf

FORD WSS-M4D927-A1-2015 POLYPROPYLENE (PP) HOMOPOLYMER 30% MINERAL FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf