GOST 19987-1974 Pouring date bushing of wax-pattern dies Design and dimensions《熔模用压模浇注套管 结构及尺寸》.pdf

相关资源

GOST 19950-1974 Bushes for wax-pattern dies Design and dimensions《熔模用压模衬套 结构及尺寸》.pdf

GOST 19951-1974 Guide columns for wax-pattern dies Design and dimensions《熔模用压模导向柱 结构及尺寸》.pdf

GOST 19952-1974 Guide bush for wax-pattern dies Design and dimensions《熔模用压模导管 结构及尺寸》.pdf

GOST 19958-1974 Cylinder ejectors for wax-pattern dies Design and dimensions《熔模用压模圆柱形顶出器 结构及尺寸》.pdf

GOST 19960-1974 Cylinder matrices-blanks for wax-pattern dies Design and dimensions《熔模用压模圆柱形下模坯 结构及尺寸》.pdf

GOST 19966-1974 Support plate for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模支承板 结构及尺寸》.pdf

GOST 19972-1974 Stationary retainer rings for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模固定套 结构及尺寸》.pdf

GOST 19984-1974 Base-blank for wax-pattern dies with rectangular matrices Design and dimensions《带矩形下模的熔模用压模底座坯料 结构及尺寸》.pdf

GOST 19998-1974 Pipe union for wax-pattern dies Design and dimensions《熔模用压模管接头 结构及尺寸》.pdf

GOST 19999-1974 Wax-pattern dies Specifications《熔模用压模夹具及零件 技术要求》.pdf

猜你喜欢

GOST 17750-1972 Jet fuel Method for the determination luminometric number on the PLCHT instrument《喷气式发动机燃料 使用ПЛЧT仪器对光通量值的测定法》.pdf

GOST 17751-1979 Jet fuel Method of test for thermal oxidation stability under dynamic conditions《喷气发动机用燃料 动态条件下热氧化安定性的测试方法》.pdf

GOST 17752-1981 Hydraulic and pneumatic drive Terms and definitions《液压和气动传动装置 术语和定义》.pdf

GOST 17756-1972 Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有全螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17757-1972 Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有不完整螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17758-1972 Double-ended threaded plug-gauges with inserts of diameters from 2 to 50 mm Design and basic dimensions《直径2mm～50mm带镶块双头螺纹塞规 结构及基本尺寸》.pdf

GOST 17759-1972 Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm Design and basic dimensions《直径为52-100 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17760-1972 Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm Design and basic dimensions《直径为52-100 mm的具有不完整螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17761-1972 Threaded plug-gauges with full of thread of diameter from 105 to 300 mm Design and basic dimensions《直径为105-300 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf