GOST 28802-1990 Drilling rigs for drilling of hydrogeological bore holes Types Basic parameters《水文地质孔钻探装置 基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

ASTM E279-2018 red 2500 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets Lump and Sinter by the Tumbler Test.pdf

ASTM E28-1999(2004) Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus《用环球仪测定从松脂制品中取得的树脂的软化点的标准试验方法》.pdf

ASTM E28-1999(2009) 374 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus《用环球仪测定来自松脂的树脂的软化点的标准试验方法》.pdf

ASTM E28-2014 red 2997 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons by Ring-and-Ball Apparatus《使用环球仪测定从松脂化学品和碳氢化合物中取得的树脂的软化点的标准试.pdf

ASTM E28-2018 red 3125 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons by Ring-and-Ball Apparatus.pdf

ASTM E280-1998(2004)e1 752 Standard Reference Radiographs for Heavy-Walled (4 &189 to 12-in [114 to 305-mm]) Steel Castings.pdf

ASTM E280-2010 9375 Standard Reference Radiographs for Heavy-Walled (4&x00BD to 12-in (114 to 305-mm)) Steel Castings《重壁((4x00BD 至12-in (114-305-mm))钢铸件的标准参考射线照片》.pdf

ASTM E280-2015 red 4844 Standard Reference Radiographs for Heavy-Walled (412 to 12 in (114 to 305 mm)) Steel Castings《厚壁 (4 1 2至12英寸 (114至305 mm)) 钢铸件用基准射线照相》.pdf

ASTM E283-2004 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen《通过.pdf