GOST R 54019-2010 Fire hazard testing Part 2-20 Glowing hot-wire based test methods Hot-wire coil ignitability Apparatus test method and guidance《火灾 第2-20部分 基于灼热 热丝的试验方法 热丝线圈可燃性 仪器.pdf

1、 540192010/IEC/TS60695-2-20:2004 2-20 . , IEC/TS 60695-2-20:2004Fire hazard testing Part 2-20: Glowing/hot-wire based test methods Hot-wire coil ignitability Apparatus, test method and guidance(IDT) 27 2002 . 184-3 , 1.02004 . 1 - - ( ) , 42 452 -, -, , 3 30 2010 . 630-4 / 60695-2-20:2004 - . 2-20.

2、 . , (IEC/TS 60695-2-20:2004 Fire hazard testing Part 2-20:Glowing/hot-wire based test methods Hot-wire coil ignitability Apparatus, test method and guidance). - () -, A5 , - . () . - , , 2012 , - - II 540192010/IEC/TS 60695-2-20:20041 .12 13 24 .25 .36 .36.1 .36.2 .46.3 .46.4 46.5 56.6 .66.7 67 Ic

3、68 .68.1 78.2 79 .79.1 79.2 .79.3 .710 .711 .812 .813 8() Ic.9B() .11C() 12A() .1515III 540192010/IEC/TS 60695-2-20:2004 () -, ( ). - . - . . , , -. , , , . () , . , , , - . , - , - . ( ) , . - . -, . , . . 89 . / 60695-2-20, - 1995 . . :FDIS ( ) 89/594/DTS 89/626/RVC , . 60695-2 . 2. : 60695-210 .

4、 2-10. . -; 60695-211 . 2-11. . -; 60695-212 . 2-12. . ; 60695-213 1 . 2-13. . - ;/ 60695-220 . 2-20. . . - , .IV 540192010/IEC/TS 60695-2-20:2004 2-20 . , Fire hazard testing. Part 2-20. Glowing/hot-wire based test methods. Hot-wire coil ignitability.Apparatus, test method and guidance 201206011 .

5、 , - . - , . . , . . - , . , . 60695-1-30. , B, - . 60696-2-13 1. - 60696-2-13 1 .2 : 60695-1-30:2002 . 1-30. -. (IEC 60695-1-30:2002 Fire hazard testing Part 1-30: Guidance for assessing the fire hazard ofelectrotechnical products Use of preselection testing procedures)/ 13943:2000 . (ISO/IEC 1394

6、3:2000 Fire safety Voca-bulary) 291:1997 . - (ISO 291:1997 Plastics Standard atmospheres for conditioning and testing) 293:1986 . , - (ISO 293:1986 Plastics Compression moulding test specimensof thermoplastic material)1 540192010/IEC/TS 60695-2-20:2004 294 ( ) . - (ISO 294 (all parts) Plastics Injec

7、tion moulding of test specimens of thermoplasticmaterials) 295:1991 . - (ISO 295:1991 Plastics Compression moulding of test specimens of thermosettingmaterials) , , . , , , . , , . .3 / 13943, :3.1 (combustion): . , - / .3.2 Ic(current Ic): , - (0,26 c177 0,01) /.3.3 (draught-free environment): , - .3.4 (ignition): .3.5 (melt through): - - .4 , , 1. - , 2. , , ., , /, , M.2 540192010/IEC/TS 60695-2-20:2004 1 5 , , . . - ., , , , - , - - . , , , .6 , .6.1 0,5 3.- , . . . , - , . - . . , - . - 0,1 /. ,