1、 , 2 ISO 21809-2:2007 Petroleum and natural gas industries-External coatings for buried or submerged pipelines used in pipeline transportation systems Part 2: Fusion-bonded epoxy coatings (IDT) 21809-2 2013 21809-22013 II 1 4 357 ( ) , 4, - , ( ) 2 357 3 - 22 2013 . 2053- 4 21809-2:2007 - . , - . 2.
2、 (ISO 21809-2:2007 Petroleum and natural gas industries-External coatings for buried or sub-merged pipelines used in pipeline transportation systems. Part 2: Fusion-bonded epoxy coatings), Cor.1:2008. , - , , , - ( ). - 1.52004 ( 3.5). - - , 5 1.02012 ( 8). ( 1 ) , - . () - - . , (gost.ru) , 2014 ,
3、- 21809-22013 III 1 .1 2 .1 3 2 4 3 5 4 6 , .4 7 .4 8 .5 9 .8 10 .9 11 12 12 .12 13 12 14 13 () .14 ( )27 .28 21809-22013 IV 21809-2:2007 - . , - . 2. . 21809-2 ISO/TC 67 -, , -, SC 2 . 21809-2 , - . 21809-2 , - . . , 21809-2 . 21809-22013 1 , . 2: . Pipes with an external coating for underground an
4、d underwater pipelines of transport systems of the oil and gas industry. Part 2: Pipes with epoxy coatings. Specifications 20150101 1 , , , - , - ( FBE) , , 13623. , - 120 , FBE, . , , . 2 :1) 31-0: 922) - 0: (ISO 31-0:1992 Quantities and units - Part 0: General principles) 8130-2 - 2: ( ) (ISO 8130
5、-2 Coating powders - Part 2: Determination of density by gas comparison pyknometer (referee method) 8130-3 - 3: - (ISO 8130-3 Coating powders - Part 3: Determination of density by liquid displacement pyknometer) 8501-1:2007 . . 1. - (ISO 8501-1:2007 Preparation of steel substrates before application
6、 of paints and related products. Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings) 8502-3 -. . 3. -, ( ) (ISO 8502-3 Preparation of steel sub-strates before applicatio
7、n of paint and related products. Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) 8502-6 . . 6. - . (ISO 8502-6 Preparation of steel substrates before applica-tion of paints and related products. Tes
8、ts for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis. The Bresle method) 8502-9 . - . 9. -1) . . 2) ISO 80000-1:2009 . 1. 21809-22013 2 (ISO 8502-9 Preparation of steel substrates before application of paints and related products. Tests for the asses
9、sment of surface cleanliness - Part 9: Field method for the conduc-tometric determination of water-soluble salts) 8503-4 . - . 4. ISO . (ISO 8503-4 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates -
10、 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure) 8503-5 . . 5. (ISO 8503-5 Preparation of steel substrates before application of paints and related products. Surface roughness charac-teristics of blast-c
11、leaned steel substrates - Part 5: Replica tape method for the determination of the surface profile) EN 10204 . . 10474:911) . . (ISO 10474: 1991 Steel and steel products. Inspection documents) 11124-2 . . 2. (ISO 11124-2:1993 Preparation of steel substrates before application of paints and related p
12、roducts - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit) 11124-3 . . 3. (ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot
13、and grit) 11124-4 . . 4. (ISO 11124-4:1993 Preparation of steel sub-strates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot) 11357-1 . (DSC). 1. - (ISO 11357-1: 2009 Plastics - Differential scanning calorim
14、etry (DSC) - Part 1: General principles) SSPC-AB 11) (SSPC-AB 1 Mineral and Slag Abrasives) SSPC-AB 2 (SSPC-AB 2 Cleanliness of Recycled Ferrous Metallic Abrasives) SSPC-AB 3 (SSPC-AB 3 Ferrous Metallic Abrasive) SSPC-SP 1 (SSPC-SP 1 Solvent cleaning) 3 : 3.1 (applicator): , . 3.2 (batch): , -, , ,
15、- 8 . 3.3 (batch certificate): , , , , . 3.4 (by agreement): , -. 1) ISO 10474:2013 Steel and steel products - Inspection documents 1)SSPC: , 40 24th Street, 6th Floor, Pittsburg. PA 15222-4656, USA 21809-22013 3 3.5 (certificate of compliance): , 10474 EN 10204, , - , . 3.6 (cutback): . 3.7 (glass transition): - ( ). 3.8 (glass transition temperature): , - . , Tg, , , . 3.9 (holiday): , . 3.10 (laboratory-coated test specimen): -, . 3.11 (manufacturer): , -. 3.12 (manufacturers sp
