1、TP-I-554A J2mXM-a April 29, 1970 I ,. S”E3IMAMEmDMENT M FEDEReL SPECEICATION IMC; STAMP-PAD, RED, FOR mToGRApHIcPRms * This interim amendment was developed by the General Services Administration, Federal Supply Service, Standardization Division, Washington, D.C. 20406, based upon currenly available
2、technical information. procurement and forward recommendations for changes to the preparing activity at the address shown above. It is recommended that Federal agencies use it in The General Services Administration has authorized the use OP this interim amendment as a valid exception to Federal Spec
3、ification TT-I-554A, dated April 10, 1956. . . PAGE1 Section 2: 2. APPLICABU DOCUMENTS 2.1 The following specifications and standards, of the issues in effect on date of invitation for bids Delete enire section and substitute: or request for proposal, form a part of-this specification ix the extent-
4、specified her+. Federal Specification: PPP-B-636 - Box, Fiberboard. Federal Standards: Fed. Std. -No. 123 Fed. Std. No. 595 - Colors. - Marking for Domestic Sipment (Cvilian Agencies), (Activities outside the Federal Government may obtain copies of Federal Specifications, Standards, and Handbooks as
5、 outlined under General Information in the Index of Federal Specifications and Standards and at the prices indicated in the Index. ia for sale on a subscription basisby the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402. (Singles copies of this specification and
6、 o$her Federal Specifications requeed .by activities outside !Che Index, which includes cumulative monthly supplements as issued, the Federal Government for bidding purposes are available withe- charge from Business Service Centers at the General Services Administration Regional Offices in Boston, N
7、ew York, Washington, D.C., Atlanta, Chicago, Kansas City, Mo., Fort Worth, Denver, San Francisco, Los Angeles, and Seattle, Washington, (Federal Government activities may obtain copies of Federal Specifications, Standards, and Handbooks and the Index of Federal Specifications and Standards from esta
8、blished distributior points in their 4 agencies. ) Military Standard: . -SIIID-l29. - Marking for Shipment and Storage. (Copies of Military Specifications and Standards required by contractors in connection with specification procurement functions should be obtained from the procuring activity or as
9、 directed by the contracting officer. ) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TT-I-554A PAU2 2 _ ._. . _._ - Paragraph 3.3 Delete and substitute: 3.3 e. The color shall be red, similar to No. u6 of Federal Standard No. 595. PAGE! 3 Add new
10、paragraph: 4.4 Emmination of preparation for delivery. An Famination shall. be made to determine that the Section 5: 5. PREPARATION FOR DELIVERY 5.1 Packaging. 5.1.1 Level A. packaging, packing and marking comply with the requirements of section 5 of this specification, Delete entire section and sub
11、stitute: Packaging shall be level A, B, or C, as specified (see 6.2). One ounce of ink shall be packaged in a glass bottle closed with a plastic or metal screw cap with liner and applicator brush of the type normally used for the application of ink to the stamp pad. Each bottle shall be further pack
12、aged in a box or tube of the type normliy used for this item. box or tube shall be sealed with tape. The 5.1.2 Level B. Inis shall be packaged as specified in 5.1.1. . 5.3.3 Level C. 5.2 Packix. 5.2.1 Level A. Stamp pad ink shall be packaged in accordance with the suppliers commercial practice, Pack
13、ing shall be level A, B, or C, as specified (see 6.2). Stamp pad ink, packaged as specified in 5.1 aod in quantities as specified (see 6.2) shall be packed in aclose-fitting ba conforming to ppp,B-636, class weather-resistant. be closed, waterproofed and strapped in accordance with the appendix to P
14、PP-B-636. 5.2.2 Level B. fitting box conforming to PPP-B-636, class domestic. appendix to PPP-B-636. 5.2.3 Level C. destination in containers complying with the rules and regulations applicable to-the mode of transportation. 5.3 Marking. 5.3.1 CLVU agencies. 5.3.1.1 Bottle and unit box or tube. INK;
15、 STAMP PAD, RED, FOR PHOTO-C PRINTS FED= SPECIFICATION TT-I-55bA QUANTITY (e.g. 1 oz.) FEtEW SMCK NUMBER (e.g. 7510-224-6752) omm MIMBER MA“FACJ!UFERS NAME OR TRADE-MARK CAUTION: DO NOT FREEZE 5.3.1.2 Shipping containers. The box shall Forty-eight bottles of ink, packaged as specified in 5.1, shall
16、be packed in a close- The box shall be closed in accordance with the Stamp pad ink shall be packed to insure carrier acceptance and safe delivery at Each bttle and box or tube shall be mked with the following data: In addition to any special marking required by the contract or order, shipping contai
17、ners shall be marked in accordance with Fed. Std. No. 123. 5.3.2 Military agencies. In addition to any special marklng required by the contract- or order, the bottle, unit box or tube, and shipping container shall be marked in accordance with MIL-STD-129. Provided by IHSNot for ResaleNo reproduction
18、 or networking permitted without license from IHS-,-,- _- - TT-I-55LIA INT AND L 75 m 9799774 OOLILOOLI 9 W PAGE 3 (continued) Paragraph 6.1 Delete and substitute: 6.1 Ordering data. Purchasers should select the preferred options offered herein and include the following information in procurement do
19、cuments: Title, number and date of this specification. t Selection of the applicable levels of packaging and packing and any special marking for shipment requirement (see 5.1, 5.2 and 5.3). Paragraph 6.4 Delete, Patent Notice. Delete. PAGE 4 t 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
