ICONTEC 1982-1986 《家用类商品，压力锅的密封包装》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSE-M2D418-A2-2009 SILICONE (VMQ) RUBBER HIGH TEMPERATURE RESISTANT OIL GROMMET TO BE USED WITH FORD WSS-M99P1111-A 《油垫环用耐高温硅橡胶 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2D434-A-2009 FLUOROELASTOMER (FKM) ARAMID FIBERS REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《聚芳基酰胺纤维增强的氟橡胶（FKM） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2D451-A-2004 HYDROGENATED NITRILE (HNBR) RUBBER TO BE USED WITH FORD WSS-M99P1111-A 《氢化丁腈橡胶（HNBR） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2D468-A1-2010 TUBING VACUUM FLEX FUEL OXIDIZED FUEL RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐氧化燃料的弹性燃料用真空管件 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2D470-A1-2004 DUCT EPDM MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A 《进气口用模制三元乙丙橡胶（EPDM）管 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSE-M2D470-A2-2009 DUCT CPE CHLORINATED POLYETHYLENE MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2D470-A1)《模制进气口用氯化聚乙烯(CPE)管 与标准FORD WSS-M99P1.pdf

FORD WSE-M2D470-A2-2013 DUCT CPE CHLORINATED POLYETHYLENE MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2D470-A1).pdf

FORD WSE-M2D470-A3-2009 DUCT CSM CHLOROSULFONATED POLYETHYLENE MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A 《模制进气口用氯磺化聚乙烯（CSM）管 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD WSE.pdf

FORD WSE-M2D470-A3-2013 DUCT CSM CHLOROSULFONATED POLYETHYLENE MOLDED AIR INTAKE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSE-M2D470-A1).pdf