ICONTEC 2146-1986 《电子类 测量线路导体横向区域的标准方法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2496-2005(2011)e1 Standard Practice for Determining the Scratch Hardness and Scrape Adhesion of Prints and Coatings《测定印刷品和覆层的划痕硬度和擦痕粘性的标准操作规程》.pdf

ASTM F2497-2005 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用苏瑟兰德(Sutherland)磨损试验仪测定喷墨介质耐磨耗和耐磨损性的标准实施规程》.pdf

ASTM F2497-2005(2011)e1 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester《用油墨耐擦性试验机测定喷墨介质附着力和耐划痕性的规程》.pdf

ASTM F2498-2005 Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《用烟熏法测定喷墨介质和墨水的干燥时间的标准实施规程》.pdf

ASTM F2498-2005(2011) Standard Practice for Determining the Drying Time of Inkjet Media and Inks Using a Smudge Method《运用污迹法测定喷墨介质和墨水干燥时间的标准操作规程》.pdf

ASTM F2502-2005 Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants《内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法》.pdf

ASTM F2502-2005(2009)e1 Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants《内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法》.pdf

ASTM F2502-2011 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants《内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法》.pdf

ASTM F2502-2017 Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants《内固定植入物用可吸收钢板和螺钉的标准规格和试验方法》.pdf