IDF 152-2009 Milk and milk products - Determination of fat content - General guidance on the use of butyrometric methods《奶和奶制品 脂肪含量的测定 油脂计测定法使用的一般指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G196-2008 Standard Test Method for Galling Resistance of Material Couples《连接材料耐磨损的标准试验方法》.pdf

ASTM G196-2008(2016) Standard Test Method for Galling Resistance of Material Couples《材料连接物的拉毛阻力的标准试验方法》.pdf

ASTM G197-2008 Standard Table for Reference Solar Spectral Distributions Direct and Diffuse on 20&x00B0 Tilted and Vertical Surfaces《太阳光光谱分布参考标准表 20 倾角和垂直面的直射和漫射》.pdf

ASTM G197-2008(2012) Standard Table for Reference Solar Spectral Distributions Direct and Diffuse on 20° Tilted and Vertical Surfaces《参考太阳光谱分布的标准表 20度倾斜和垂直面上的直射和散射》.pdf

ASTM G197-2014 Standard Table for Reference Solar Spectral Distributions Direct and Diffuse on 20° Tilted and Vertical Surfaces《太阳光光谱分布参考标准表 20倾角和垂直标准的直射和漫射》.pdf

ASTM G198-2011 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood《与处理过的木材接触的驱动紧固件的相对腐蚀性能测定的标准试验方法》.pdf

ASTM G198-2011(2016) Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood《测定与经处理木料接触的打入式紧固件相对腐蚀性能的标准试验方法》.pdf

ASTM G198-2017 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood《测定与经处理木料接触的打入式紧固件相对腐蚀性能的标准试验方法》.pdf

ASTM G199-2009 Standard Guide for Electrochemical Noise Measurement《电化学噪声测量标准指南》.pdf