HBm 65 21-1988 《微型汽车 汽油机凸轮轴技术条件》.pdf

相关资源

HBm 65.7-1988 微型汽车 机械式变速器台架试验方法.pdf

HBm 52-1987 微型汽车组合仪表.pdf

HBm 65.17-1988 微型汽车 汽油机气门.pdf

HBm 65.18-1988 微型汽车 汽油机曲轴.pdf

HBm 65.26-1988 微型汽车 汽油机汽油滤清器.pdf

HBm 65.27-1988 微型汽车 汽油机旋装机油滤清器.pdf

HBm 57-1987 微型汽车 机油压力报警器.pdf

HBm 60-1987 微型汽车仪表高温和低温试验方法.pdf

HBm 61-1987 微型汽车仪表防尘试验方法.pdf

HBm 58-1987 微型汽车 仪表振动试验方法.pdf

猜你喜欢

DIN 5480-1-2006 Involute splines based on reference diameters - Part 1 Generalities《基于参考直径的渐开线花键 第1部分 总则》.pdf

DIN 5480-15 Berichtigung 1-2009 Involute splines based on reference diameters - Part 15 Inspection Corrigendum to DIN 5480-15 2006-03《基于参考直径的渐开线花键 第15部分 检查 技术勘误DIN 5480-15-2006》.pdf

DIN 5480-16 Berichtigung 1-2009 Involute splines based on reference diameters - Part 16 Tools Corrigendum to DIN 5480-16 2006-03《基于参考直径的渐开线花键 第16部分 工具 技术勘误DIN 5480-16-2006》.pdf

DIN 5480-2-2015 Involute splines based on reference diameters - Part 2 Nominal and inspection dimensions《基于参考直径的渐开线花键 第2部分 标称和检验尺寸》.pdf

DIN 54802-1-2015 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 1 Planetary mixer m.pdf

DIN 54802-2-2015 Testing of plastics - Determination of plasticizer sorption and rate of plasticizer sorption in the heat of vinyl chloride (VC) polymers - Part 2 Statical method《塑.pdf

DIN 54813-1994 Testing of plastics testing of joints of textile glass reinforced polyester resins determination of the breaking load by the bending shear test《塑料检验 纺织玻璃纤维增强的聚酯树脂塑料的.pdf

DIN 54815-1-1998 Pipes of filled polyester resin moulding materials - Part 1 Dimensions materials designation《填充聚酯树脂模塑材料的管材 第1部分 尺寸、材料和标识》.pdf

DIN 54815-2-1998 Pipes of filled polyester resin moulding materials - Part 2 Requirements testings《填充聚酯树脂模塑材料的管材 第2部分 要求和试验》.pdf