INTA 12 23 10 《轻合金铝铸件铝，镁 10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D7054-2004(2009) 895 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America《与北美用涂料敷抹器一起使用的伸缩杆的警告标签的标准规范》.pdf

ASTM D7054-2004(2013) 3183 Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America《与北美用涂料敷抹器一起使用的伸缩杆的警告标签的标准规范.pdf

ASTM D7055-2004 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings《涂层试验用热轧碳钢薄板准备(喷砂清理)的标准规程》.pdf

ASTM D7055-2009 5000 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings《涂层试验用热轧碳钢薄板准备(喷砂清理)的标准实施规程》.pdf

ASTM D7055-2014 9024 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings《涂层试验用热轧碳钢薄板准备 (喷砂清理) 的标准实践规程》.pdf

ASTM D7056-2007 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams《预制沥青土工膜接缝拉伸剪切强度的测定用标准试验方法》.pdf

ASTM D7056-2007(2012) 7430 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams《预制沥青土工膜接缝拉伸剪切强度的测定用标准试验方法》.pdf

ASTM D7056-2007(2018) 8125 Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams《测定预制沥青土工膜接缝抗拉剪切强度的标准试验方法》.pdf

ASTM D7057-2004 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)《气相色谱法分析异丙基苯的标准试验方法》.pdf