IRAM 2121-1958 《在电压小于等于500伏的情况下使用的带有便携式螺旋线圈的快速型保险丝》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 3540-1980 CONCAVE MILLING CUTTER Dimensions《凹铣刀尺寸》.pdf

STAS 3541-1980 ANGULAR MILLING CUTTER Dimensions《斜面铣刀尺寸》.pdf

STAS 3542-1980 DOUBLE ANGLE MILLING CUTTER Dimensions《对称双角铣刀尺寸》.pdf

STAS 3543-1980 ANGULAR CUTTERS FOR GROOVING OF STANDARD TOOTHED CUTTER Dimensions《用于标准齿锉刀开槽的角铣刀》.pdf

STAS 3545-1980 1 4C0NCAVE MILLING CUTTER Dimensions《1 4凹铣刀尺寸》.pdf

STAS 355-1967 《高速钢刃车刀 宽刃刀 尺寸》.pdf

STAS 3554-1987 FODDER STRAW《秸秆》.pdf

STAS 356-1967 《钢刃车刀 内刀大小 尺寸》.pdf

STAS 3565-1959 《高压航空线 带防护罩的悬置隔离器大小》.pdf