1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU TERMINALS FOR TELEMATIC SERVICES T.502 (1 1/94) DOCUMENT APPLICATION PROFILE PM-11 FOR THE INTERCHANGE OF SIMPLE STRUCTURE, DOCUMENTS FORMATTED CHARACTER CONTENT tN PROCESSABLE AND FORMS ITU-T Recommendation
2、T.502 (Previously “CCIlT Recommendation”) ITU-T RECMN*T*502 94 = 4862591 0596506 Ob8 = FOREWORD The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (IT). The IT-T is responsible for studying technical, operating and tariff questions
3、and issuing Recommen- dations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendat
4、ions on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WSC Resolution No. 1 (Helsinki, March 1-12, 1993). ITU-T Recommendation T.502 was revised by -T Study Group 8 (1993-1996) and was approved under the WTSC Resolution No. i proced
5、ure on the 1 lth of November 1994. NOTE In this Recommendation, the expression Atministration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agencF O ITU 1995 All rights reserved. No part of this publication may be reproduced or utilized in an
6、y form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. ITU-T RECMN*T.SOZ 34 4862593 057b507 TT4 CONTENTS scope Normative references . 2.1 Paired Recommendations I Internatienal Siandards equivalent in technical content 2.2
7、Additional references Definitions . Relationship with other Profiles . Conformance 5.1 Data stream conformance . 5.2 Implementation conformance . Characteristics supported by this document application profile . 6.1 6.2 6.3 6.4 6.5 Overview 6.1.1 General 6.1.2 Formatted form documents . 6.1.3 Process
8、able form documents . 6,1.4 Formatted processable form documents Logical characteristics 6.2.1 Introduction . 6.2.2 Overview of the logical structure 6.2.3 Body part of the logical structure 6.2.4 Common content part of the logical structure . Layout characteristics . 6.3.1 Overview of the layout ch
9、aracteristics 6.3.3 PageSet 6.3.4 Page characteristics . 6.3.5 Body area characteristics . . 6.3.6 Header and footer area characteristics 6.3.7 SpecifcBlock . Document layout characteristics . 6.4.1 Flow controls 6.4.2 6.4.3 Layout controls applicable in the absence of a generic layoutstructure . Co
10、ntent layout and imaging characteristics 6.5.1 Introduction . 6.5.2 Character content architecture class 6.5.4 Code extension techniques 6.5.5 6.5.6 Character spacing . 6.5.7 Character paih and line progression 6.5.8 Character orientation . 6.3.2 DocumentLayoutRoot . Layout of the document content 6
11、.5.3 Character repertoire Line spacing . . . Recommendation T502 (11/94) Page 1 1 1 2 3 3 3 4 4 4 4 4 4 5 5 5 5 6 6 6 7 7 9 9 9 11 11 11 11 12 13 13 14 14 15 15 16 16 16 18 18 1 ITU-T RECMNXT.502 94 4862573 0596508 730 m 6.5.9 6.5.10 6.5.11 6.5.12 6.5.13 6.5.14 6.5.15 6.5.16 6.5.17 6.5.18 6.5.19 6.5
12、.20 6.5.21 Emphasis . Tabulation . Indentation Alignment . First line format . Widow and orphan sizes . Reverse character string Superscripts and subscripts . Line br . Substitution of characters Initial point Use of control functions Formatting the content 6.6 Miscellaneous features 6.6.1 Applicati
13、on comments 6.6.2 Alternative representation . 6.6.3 Page numbering 6.6.4 User readable comments . 6.6.5 User visible name Document management features : 6.7.2 Document identification information 6.7 6.7.1 Document constituent information 6.7.3 Document default information 6.7.4 Non-basic characteri
14、stics information . 6.7.5 Document management attributes . Specification of constituent constraints 7 7.1 7.2 7.3 7.4 7.5 7.6 ll Introduction 7.1.1 7.1.2 7.1.3 Notation . 7.2.1 Macro definitions 7.2.2 Constituent constraints Logical constituent constrats z . 7.3.1 Macro definitions 7.3.2 Factor cons
15、traints . . . 7.3.3 Constituent constraints . i Layout constituent constraints . 7.4.1 Macro definitions 7.4.2 Factor constraints 7.4.3 Constituent constraints ; . Layout style constituent constraints 7.5.1 . Macrodefinitions 7.5.2 Factor constraints 7.5.3 Constituent constraints 7.6.1 Macro definit
16、ions Diagrams of relationships of logical constituents . Diagrams of relationships of layout constituents Document profile constituent constraints . - Presentation style constituent constraints Page 18 19 19 19 19 20 20 20 20 20 21 21 21 21 21 22 22 23 23 24 24 24 25 25 26 27 27 27 28 29 30 30 34 36
17、 36 37 37 39 39 40 41 44 44 44 44 45 45 7.6.2 Factor constituent constraints . 45 7.6.3 Constituent constraints 45 Recommendation T.302 (11194) ITU-T RECMNaT.502 94 4862593 0596509 877 W 7.7 Content portion constituent constraints 7.7.1 Macro definitions 7.7.2 Factor constraints 7.7.3 Constituent co
18、nstraints 8 Interchange format . 8.1 Interchange format 8.2 8.3 Document application profile object identifier . 8.4 Data lengths Encoding of application comments . Annex A - Amendments and technical corrigenda . A.l Amendments . Amendments to the base standard . A . 1 . 1 . A.1.2 Proposed changes t
19、o standards due to defects A.2 Technical corrigenda A.2.1 Technical corrigenda to this Recommendation . Versions of the ODA International Standard Annex B - Recommended practices Transfer methods for ODA . B.l. 1 B.1.2 B.1.3 B.1.4 A.3 B.l Conveyance of ODA over CCI?T X.400-1984 Conveyance of ODA ove
20、r TAM . Conveyance of ODA over DTAM Conveyance of ODA over flexible disks Annex C - Bibliography Page 46 46 46 46 47 47 48 48 48 48 48 48 49 49 49 49 49 49 49 50 50 50 50 . . Recommendation T.502 (1U94) iii ITU-T RECMNUT.502 94 4862571 0576530 599 = SUMMARY This Recommendation specifies an ODA Docum
21、ent Application Profile AP) named PM-11. This Profile specifies interchange formai for the transfer of structured documents between equipment designed for word or document processing. Such documents contain character content. The documents that can be interchanged using this Profile range from memos
22、 and letters to simple structured documents. This Profile provides a comprehensive level of features for the transfer of documents between these systems. A document structured in accordance with this Profile is represented for interchange by the Open Document Interchange Format (ODIF), as defined in
23、 Recommendation T.415. iv Recommendation T502 (11/94) ITU-T RECMN*T.502 74 m 4862591 05765L1 425 INTRODUCTION This Recommendation specifies an ODA Document Application Profile A) named PM-11. The purpose of this Profiie is to facilitate the interworking of applications interchanging documents based
24、on ODA, T.410-Series CCiT Recommendations I ISODC 8613. This Profile is suitable for interchanging documents in formatted form, processable form or formatted processable form and has been defined in accordance with CCIT Recommenda- tionT.411 I ISOBEC 8613-1. The format of this Profile is in accordan
25、ce with the standardized proforma and noiation defined in Annex F of CCITT Recommendation T.411 I ISO/lEC 8613-1. ,Recommendation T502 (11/94) V ITU-T RECMN*T.502 94 = 4862591 O596532 3bL Recommendation T.502 DOCUMENT APPLICATION PROFILE PM-11 FOR THE INTERCHANGE OF SIMPLE STRUCTURE, CHARACTER CONTE
26、NT DOCUMENTS IN PROCESSABLE AND FORMATTED FORMS (revised in 1994) 1 Scope This Profile specifies interchange format for the transfer of structured documents between equipment designed for word or document processing. Such documents contain character content. The documents that can be interchanged us
27、ing this Profile range from memos and letters to simple structured documents. This Profile provides a comprehensive level of features for the transfer of documents between these systems. This Profile allows documents to be interchanged in the following forms: - formatted form; - processable form; -
28、formatted processable form. The architecture levels defined for these three forms have matching functionalities so that the interchange formats of a document are convertible from a processable form to any other form. This Profile is independent of the processes carried out in an end system to create
29、, edit or reproduce documents. It is also independent of the means to transfer documents which, for example, may be by means of communication links or storage media. A document structured in accordance with this Profile is represented for interchange by the Open Document Interchange Format (ODIF), a
30、s defined in Recommendation T.415 I ISO/IEC 8613-5. 2 Normative references The following Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Rec
31、ommendations and other references are subject to revision: a11 users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of currently valid IT-T Recommendations is regularl
32、y published. 2.1 Paired Recommendations I International Standards equivalent in technical content - CCITT Recommendation T.411 (1988), Open Document Architecture (ODA) and Interchange Format: Introduction and General Principles. IS0 8613-1:1989, Information processing - Text and office systems - Off
33、ice Document - Architecture (ODA) and Interchange Format - Pa# 1: Introduction and General Principles. CCIT Recommendation T.411 Annex F (1991), Open Document Architecture (ODA) and Interchange Formut: Introduction and General Principies - Annex F: Document Application Profile Proforma ana! Notation
34、. - IS0 8613-1 Add. 1: Information pracessing - Text and office systems - Office Document Architecture (ODA) and Interchange Formt - Part I: Introduction and General Principles - Addendum I: Document Application Profile Proforma and Notation. Recommendation T.502 (1lf94) 1 - CCITT Recornmendation T.
35、412 (1988), Open Docilment Architecture (ODA) and Interchange Format: Document Structures. IS0 8613-2:1989, Information processing - Text and office systems - Office Document Architecture (ODA) and Interchange Format - Part 2: Document Structures. CCITT Recommendation T.414 (1988), Open Document Arc
36、hitecture (ODA) and Interchange Format: Document Profile. IS0 8613-4:1989, Information processing - Text and office systems - Office Document Architecture (ODA) and Interchange Format - Part 4: Document Profile. CCIT Recommendation T.415 (1988), Open Document Architecture (ODA) and Interchange Forma
37、t: Open Document Interchange Format (ODIF). IS0 8613-5:1989, Information processing - Text and office systems - Office Document Architecture (ODA) and Interchange Format - Part 5: Ofice Document Interchange Format (ODIF). CCITT Recommendation T.416 (1988), Open Document Architecture (ODA) and Interc
38、hange Formt: Character Content Architecture. IS0 8613-6:1989, Information processing - Text and office systems - Office Document Architecture (ODA) and Interchange Format - Part 6: Character content architectures. CCITT Recommendation X.208 (1988). Specifcation of Abstract Syntax Notation One (ASN.
39、I). ISO/IEC 8824: 1990, Information technology - Open Systems Interconnection - Speccation of Abstract Syntax Notation One (ASN. I). CCITT Recommendation X.209 (1988), Specijcation of basic encoding rules for Abstract Syntax Notation One (ASN.1). ISOIIEC 8825: 1990, Information technology - Open Sys
40、tems Interconnection - Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN. I). IT-T Recommendation T.505 (1994), Document Application Profile PM-26 for the Interchange of Enhanced Structure, Mixed Content Documents in Processable and Formatted Forms. ISO/IEC ISP 11 181-1 :19
41、93, Information technology - International Standardized Profile FOD26 - Open Document Format: Enhanced document structure - Character, raster graphics and geometric graphics content architectures - Part 1: Document Application Profile (DAP). ITU-T Recommendation T.506 (1993), Document Application Pr
42、ofile PM-36 for the Interchange of Extended Structure, Mixed Content Documents in Processable and Formatted Forms, ISO/IEC ISP 1 11 82-1: 1993, Information technology - International Standardized Profile FOD36 - Open Document Format: Extended document structure - Character, raster graphics and geome
43、tric graphics content architectures - Part 1: Document Application Profije (DAP). CCMT Recommendation T.50 ( 1 B2), Intemational Reference Alphabet (IRA). Information technology - 7-bit coded character set for information interchange. ISOLEC 646: 1991, Information technology - IS0 7-bit coded charac
44、ter set for information interchange. CCIT Recommendation T.5 1 (1992), Lutin Based Coded Character Sets for Telematic Services. ISOLEC 6937: 1994, Information technology - Coded graphic character set for the communication of texts using the Latin alphabet. - - - - - - - - - 2.2 Additional references
45、 - IS0 2022:1986, Information processing - IS0 7-bit and the data stream shall be structured in accordance with the interchange formats defined in clause 8; the document, as represented by the data stream after resolution of any external references, shall be structured in accordance with one of the
46、documents architecture classes as defined in 6.1 and shall contain all mandatory constituents specified for that class; other constituents may be included, provided that they are permitted for that class, as specified in clause 7; b) c) d) each constituent shall contain all those attributes specifie
47、d as required for that constituent in this Profile; other attributes may be specified provided that they are permitted for that constituent; the attribute values specified shall be within the range of permissible values specified in this Profile; the encoded document shall be constructed in accordan
48、ce with the abstract document architecture defined in CCITT Rec. T.412 I IS0 8613-2; the document shall be structured in accordance with the characteristics and constraints specified in clause 6. e) f) g) 5.2 Implementation conformance This subclause states the requirements for implementations claim
49、ing conformance to this Profile. A conforming receiving implementation shall be capable of receiving either any data streams conforming to this Profile structured in accordance with ODIF. Receiving usually, but not always, involves recognizing and further processing the data stream elements. 6 Characteristics supported by this document application profile This clause describes the characteristics of documents which may be represented by data streams conforming to this Profile. This clause also describes how these characteristics are represented in term of constituent c
