JUS C A2 035-1987 Physical tests of meta s Determinatlon ofparticle si e of metal Iic powders by dry sleving《金属的物理测试 干筛法测定金属粉末的粒度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6593-2016a 5717 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with G.pdf

ASTM D6593-2017 red 8750 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled wit.pdf

ASTM D6594-2006 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135&176 C《135℃时柴油机油腐蚀性评价的标准试验方法》.pdf

ASTM D6594-2008 923 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135&176 C《135℃时柴油机油腐蚀性评价的标准试验方法》.pdf

ASTM D6594-2013 red 0000 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135&8201 ° C《评定柴油机油在135 摄氏度下腐蚀性的标准试验方法》.pdf

ASTM D6594-2014 red 7855 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135° C《评估在135℃温度条件下柴油发动机油侵蚀作用的标准试验方法》.pdf

ASTM D6595-2000(2005) Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emi.pdf

ASTM D6595-2000(2011) 9375 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomi.pdf

ASTM D6595-2016 red 3141 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic .pdf