JUS C J2 014-1987 Rough castings ofgrey iron General tolerances and machining allowances《灰铸铁毛坯 一般公差及加工余量》.pdf

相关资源

JIS B0403-1995 铸件.尺寸公差和机械加工余量体系.pdf

CB T 3474.2-1992 船用主辅机钢模锻件公差及机械加工余量.pdf

CB-Z 45-1985 有色合金铸件机械加工余量.pdf

HB 6077-1986 模锻件公差及机械加工余量.pdf

JB T 9179.5-1999 水压机上自由锻件机械加工余量与公差 短圆柱类.pdf

HB 0-7-1967 铸件尺寸公差和加工余量.pdf

HB 6587-1992 锤上自由锻件机械加工余量与尺寸公差.pdf

HB 6103-2004 铸件尺寸公差和机械加工余量.pdf

QJ 1122.1-1987 切削加工余量 小尺寸零件.pdf

JB T 11759-2013 冷轧轴承环件机械加工余量及公差.pdf

猜你喜欢

BS ISO 26482-2010 Hardmetals - Determination of lead and cadmium content《硬质合金 铅和镉含量的测定》.pdf

BS ISO 26603-2017 Plastics Aromatic isocyanates for use in the production of polyurethanes Determination of total chlorine《塑料 聚氨酯生产用芳族异氰酸盐 总氯含量的测定》.pdf

BS ISO 26622-1-2017 Modular taper interface with ball track system Dimensions and designation of shanks《带球轨系统的模块锥形接口 柄的尺寸和标注》.pdf

BS ISO 26622-2-2008 Modular taper interface with ball track system - Dimensions and designation of receivers《带球轨系统的模块锥形接口 接收器的尺寸和标注》.pdf

BS ISO 26623-1-2014 Polygonal taper interface with flange contact surface Dimensions and designation of shanks《法兰连接表面的多边锥形接口 柄的尺寸和标注》.pdf

BS ISO 26623-2-2014 Polygonal taper interface with flange contact surface Dimensions and designation of receivers《带法兰接触表面的多边锥形接口 接收器的尺寸和标注》.pdf

BS ISO 26642-2010 Food products Determination of the glycaemic index (GI) and recommendation for food classification《食品 血糖指标(GI)测定和食品分类推荐规范》.pdf

BS ISO 26683-1-2013 Intelligent transport systems Freight land conveyance content identification and communication Context architecture and referenced standards《智能运输系统 货物内陆运输识别和通讯 .pdf

BS ISO 26683-2-2013 Intelligent transport systems Freight land conveyance content identification and communication Application interface profiles《智能运输系统 货物内陆运输内容识别和通讯 应用程序接口配置文件》.pdf